The Encore

The Encore
Design Goals
Driver Selection
Enclosure Design
Enclosure Assembly
Crossover Design
Conclusion
Parts List
About the Designer
- Driver Selection -

To me, the term "compact" usually precludes using any driver bigger than 6" (in my mind, 6-1/2" or greater gets into what I consider average to large speaker sizes.) Since I knew from the outset that these would have a subwoofer available if needed, I fi gured I would be fi ne using any of a number of nominal 5-1/4" to 6" drivers. In that size range, I chose the RS150S-8 6" woofer because of its good sonic reputation, high value, and relatively long excursion capabilities compared to other woofers its size.

To go with the RS150S-8, I chose the RS27AS-4 1-1/8" shielded aluminum dome tweeter. This tweeter matches sonically with the woofer very well, and the shielded construction will make for a fully shielded speaker. I know what you're thinking-I've used this tweeter a lot. But what can I say?-I like it!

DAYTON RS150S-8 6" REFERENCE SERIES SHIELDED WOOFER

DAYTON RS28AS-4 SHIELDED 1-1/8" ALUMINUM DOME TWEETER

DAYTON TW-0.25BE .25 CU FT 2-WAY CABINET PR BEECH