Speaker Project: RockNDock

Project Category

 

Speaker Projects

 

Tactile Transducer Projects

 

Home Subwoofer Projects

 

Home Audio Projects

 

Amplifier Projects

 

Car Audio Projects

 

Other Projects

 
 

  Add Your Project

Create projects with your own descriptions, photos, design goals, material selection, schematics, and share with other audio enthusiasts.

 

 

Shop Parts Express

Ready-to-Assemble Speaker Kits

Speaker Building Components

Find the Right Woofer


RockNDock

Matt Phillips’ RockNDock combines the latest in amplifier and high-end speaker design to create a portable sound system that rivals many high dollar finished speakers. Check out the details below and get started on your own speaker project today!

RockNDock

Designer: RockDoc

Project Time1-8 hours
Project Complexityhobbyist
Project Cost$100-$500
  

Driver Selection

The specs for the Dayton Audio RS100-4 (#295-378) 4" full-range driver have always intrigued me: relatively flat response, high Xmax, and compatibility with small ported enclosures. Initially I was going to use only a pair of full range drivers, until my first listening impressions, during which I decided to add a small tweeter to help with the high-end. I chose the Dayton Audio ND16FA-6 5/8" dome neodymium tweeter (#275-025) because of its small size and great reviews. I selected Dayton Audio’s DTA-2 (#300-385) amplifier module for the power.

Enclosure Design

I knew this wasn’t going to be a 2 lb. “pocket boombox,” so I had a little wiggle room. I modeled the woofers and came up with 0.15 cu. ft. for each, with a 1" diameter by 4" long port (#260-470) that tuned the enclosure to about 55 Hz. The center compartment is just large enough for a 12V, 7 Ah sealed lead acid battery. The amplifier is mounted to the ceiling of this compartment. The volume control plate on the front was drilled for the volume knob and LED light.

Amplifier/Crossover Configuration

I wasn't concerned with reference-quality playback, just good listenable sound that would still make people take notice. The crossover for this was very quick and painless, a simple second order high-pass for the tweeter centered at 8 kHz. The only tweaking I did was for the tweeter padding and I ended up with about 1 dB of tweeter attenuation.

Enclosure Assembly

I wanted the amplifier and battery in the center, so the overall exterior dimensions ended up being 17" wide, 6" high, and 10" deep using 3/4" MDF for the front and rear and 1/2" for everything else. I used what I had laying around; I’m sure 1/2" would be fine for everything. Everything was glued and brad-nailed for quick assembly. I finished the cabinet in two coats of Duratex (available at www.acrytech.com) using a foam roller for the first coat and a textured roller for the finish coat.

Conclusion

I am very impressed with this boombox. The output capability is what surprised me the most, as it seems to have plenty of dynamic headroom. The bass extension is amazing as well, considering the enclosure’s size. With a 12V, 7 Ah SLA battery, I have had 8 + hours of continuous playback at relatively high volume levels with no power loss issues. I’m sure it will play at least twice this long, but I just haven’t had the system on long enough to test it. If you love music and enjoy doing things where a 110V receptacle is not always an option, this is a great project for you.

About The Designer

Matt Phillips has been an audio enthusiast for many years. His fascination with cutting-edge products and concepts has been strong ever since the beginning of his speaker building hobby. Building on experience gained from working at Parts Express, he continues to explore new concepts and applications. Matt’s other interests include woodworking, toying with RC cars, drumming for his local church’s praise band, and going to the shooting range.

Project Parts List

Dayton Audio RS100-4 4" Reference Full-Range Driver 4 Ohm

Penn-Elcom 0394BK Black Rubber Strap Handle 7" x 1"

Dayton Audio ND16FA-6 5/8" Neodymium Dome Tweeter

Peavey Small Rubber Feet Set of 4

Penn-Elcom D0941K Blank Dish Black 3-1/2" x 5-1/8"

Penn-Elcom M1320K Brass Amplifier Knob Black

Dayton Audio DMPC-2.2 2.2uF 250V Polypropylene Capacitor

Jantzen 0.25mH 20 AWG Air Core Inductor

1 Ohm 5W Resistor Wire Wound 5% Tolerance

Dayton Audio DTA-2 Class T Digital Audio Amplifier Module

Port Tube 1" ID x 4" L Flared

JSC Wire Speaker Wire Cable 18 AWG Clear 50 ft. USA

Power-Sonic PS-1270F2 Sealed Lead Acid Battery 12V 7Ah

 

Matt Phillips Matt Phillips









Start a discussion about the RockNDock project.

 

Next > Mini Grand-daddy’s


Next > Mini Grand-daddy’s

top

 

 

Get Deals
emailed to you every week.

Be the first to hear about new and exciting products,special pricing and incredible deals!

See This Week's "GET DEALS" Email
Parts Express
725 Pleasant Valley Dr.Springboro,OH 45066USA
800-338-0531

© 1996-2015 Parts Express, All Rights Reserved

Host-Name:ZNODE1
Live Chat Software