|
Studio Pro WH10 10" Woofer Accordian Surround
I bought a pair of these to replace the blown drivers in a pair of kustom stage monitors I own. The stock speakers in those monitors were only rated at 50 watts rms (so of course i blew them out) and I just decided to get the cheapest replacement speakers possible. I was delighted to find that these speakers sounded just as good as the ones they replaced and could take almost 3 times the power. So all in all I'd say these are a great buy for replacing blown woofers or building some inexpensive stage speakers. I only wish they made a 12" version of these.
|
|
|
Goldwood GW-1058 10" Pro Woofer
this pa speaker is pretty good in spl even out of its box good power handling it performs how it should but i did not get to test it out in a box, because the surround is easy to tear, not that easy but accidently smack it with your fingers and bam its done.
|
|
|
Eminence Deltalite II 2510 Neo 10" Driver
I build my Bill Fitz Omni 10 around this driver, and I couldn't be happier! Hits low Es with authority, and weighs nothing.
http://www.billfitzmaurice.com/Omni10.html
A bit pricey for those of use used to building with $20 drivers, but worth every penny ime.
|
|
|
Pyle Pro PPA10 10" PA Speaker
I have been using these in a enclosed cabinet. With a Fender bassman 400 watt amp and a Jazz bass, they work great!
|
|
|
Selenium 10PW3-SLF 10" Driver
For the money this is the best woofer to go with. It handles great power and performs well
|
|
|
Goldwood GW-10120 10" Deluxe PA Woofer
These drivers are a great choice for pro systems or studio applications. The bass is very clean and accurate, there is great value in the product price, as well as quality in the build. The GW-10120 10" LF acoustic transducer is a true contender! I have four that I have modified for bass reflex loading. With the massive motor assembly and 3" voice coil, these things can move furniture, on the third floor, of the house next door!! what more do you want from a 10" pro woofer? -They were a great buy!!...
|
|
Eminence Kappa Pro-10A 10" Cast Frame Driver
I bought 2 of these to go in an Avatar 2X10 cabinet for those times when I didn't need or want to haul my 2 SWR Goliath III cabinets. One of them had problems right out of the box because only half of the spider was glued on. I sent it back and got a replacement from Eminence. After running these for a short time both cones creased and they make a frapping sound all the time so I replaced them with the 2 Delta 10's that these were supposed to be an upgrade for. I still run those Delta 10's and they work great but I was hoping for a little more power handling. These did NOT do it, probably because of the short XMax. I gave the features a 4 because of the threaded posts, cast fram and the big-assed magnets that will impress your friends.
|
|
Eminence Beta-10A 10" Guitar/PA Driver 8 Ohm
I initially purchased a pair of these drivers to upgrade a pair of Kustom KPC10M monitor wedges. The original drivers were pretty wimpy, and the overall sound of the monitor lacked punch and power handling was dismal. Using the Eminence Beta-10A made a huge difference in the monitors' sound -- they sound excellent now, especially considering the small size. I've just bought two more to upgrade a second pair of monitors.
|
|
|
B&C 10HPL64 10" Neodymium Woofer
i got two of those babys in a bass ammp italian made (mark bass)and a piezo,300watts combo,my 5 and six strings basses never sounded so good,powerfull in lowwww end one word fantastic
|
|
|
Eminence Delta-10A 10" Midrange Driver 8 Ohm
Huge air movement. These hit every note my 5-string can give 'em. LOUD and RESPONSIVE! I have 4 in my 410 cabinet. They literally will thump your chest or any other body part! I love these speakers and would buy them again. Not that I ever would have to. I have them wired in series/parallel at 8 ohms and a massive 1400 watts of power handling. THESE ARE THE SPEAKERS YOU WANT, HANDS DOWN!
|
|
|
Goldwood GW-10090 10" Select Series PA Woofer
I replaced the original 10" speakers in my two David Eden 210-XST cabinets with these. That's 4 of these Bad Boys! They are nothing short of excellent in every respect and a significant improvement over the stock speakers. I play a 6-string Modulus Quantum 6 bass that has low end for days and at high volume levels I'll get port distortion from my cabinets before I even get get close to speaker break-up. I drive each pair at 550 watts and I would recommend these for any low-end applications that don't require the power-handling capacity of the GW-10120's. You won't be disappointed with these!
|
|
|
Selenium 10MB1P 10" Midbass Driver
I use a pair of these in a tri-amped PA cabinet along with a Selenium ST324 bullet tweeter and a McCauley Sound 6258 18" low frequency driver. The 10MB1P drivers deliver clean and crisp vocals, searing guitars, and greak keyboards.
I had one issue and it may have been with the shipper - 3 out of 4 drivers arrived with the mounting rings bent inward. Parts Express was kind enough to replace them and shipped the replacements in an extra padded box.
I am a long time client and will be for life.
|
|
|
B&C 10NW64 10" Neodymium Woofer
If you want to go first class and lose some weight, try these. I built two 2 X 10" cabs for a client's stereo guitar rig. His tones range from crystal-clean to crazy-distorted, and these things handle all of them VERY nicely. Each cab weighs only about 25 lbs, but MAN do they SCREAM!
He loves these B&C speakers and so do I after hearing him play them the other night. Two or four of these will give you ferocious SPL, intense power-handling in very light-weight packages.
|
|
|
Eminence Alpha-10A 10" Guitar/PA Driver
Nice sounding, Not coloured in anyway, lead guitar sound full and articulate, I think there is not much diference between this one and the patriot Series, maybe this one be less brightess, but much better than The Stock Peavey Envoy 110 this one give a new life to this amp, I was thinking buy a new amp, but this speaker help me to save some bucks.
|
|
|
B&C 10MD26 10" Midbass
its great
|
|
|
Eminence Delta-10B 10" Midrange Driver 16 Ohm
Excellent mid-bass. I built a pair of ported high/mid cabinets, each using two of these and a high quality tweeter. Wired them up with Zobel and crossover networks. Very efficient with good power handling. Good transient response and clarity. Vocals, guiter, keyboard-piano, and things in that range really come through. Better clarity than typical high/mid cab with 12 or 15 inch woofer. Not much low bass, but not what they are designed for. Use with bottoms. Would buy again.
|
|
|
Selenium 10MB3P 10" Woofer / Midbass
this is the best midrange/midbass speaker i ever had. i was looking for something just like this. i was always missing these freqeuency ranges in my car audio. this speaker plays this range well and it really stands out...
|
|
|
Goldwood GW-1038/PA 10" Guitar Speaker
My friend owns a venue and asked me design a cab for him. purchased 4 of these bad boys and put them into a box with some stuffin. Hooked them up for 8 ohms. Pluged in his head and started to play! We looked at each other and smiled. Blew his name brand cab away!!! They are hungry so make sure you have enough head room! AWESOME FOR THE PRICE!! Thanks parts express!!
|
(74 reviews)
(51 reviews)
