|
Pioneer AHE60-51F 3-1/2" Horn Tweeter
Very efficient and pleasant sounding. Dispersion is fairly focused though.
|
|
4" x 10" Horn Midrange
I got these to replace some plastic horns that kept on breaking whenever they were dropped. These sound good. I haven't drop tested these yet. Also the cutout for these is slightly wider at the ends as it flares out.
|
|
|
Selenium ST350 Super Tweeter
best tweeter i ever used in car audio,we use lots of them,sound is great.
|
|
|
Pyle Pro PDBT18 Bullet Horn Tweeter Pair
Plays high notes very well but also has a spike were the letter "S" is pronounced so one may lower its high sensitivity to reduce that.
overall i'm satisfied with plans to upgrade to daytons because the mounting configuration is kinda strange on these with the terminals almost as wide as the face plate
|
|
|
3-3/8" Bullet Tweeter
Can't beat the price for a good replacement tweeter.
|
|
|
Heavy Duty Titanium Super Tweeter TW44
Quality and sound of this product is great. I failed to examine the mounting template in compairson to the tweeter - Assuming it was right.
After cutting the hole in my speaker cabinet, I literally dropped the tweeter in. Yes the template that was with this tweeter was way too big. I do blame myself for not figuring it out before cutting the hole. Now I have a custom insert to hold my new tweeter in place.
|
|
Pyle Pro PH25 3" x 3" Horn Tweeter
works flawlessly!!!
|
|
|
Eminence APT-80 Super Tweeter with 80° Conical Horn
these get REAL loud with little power (30w) but they are sort of harsh, but i still like them. with the right crossover and EQ, you can get them sounding pretty good.
|
|
|
Heavy Duty Titanium Super Tweeter TW47
great sound high or low volumn whith smooth sound
|
|
|
Eminence APT-200 Super Tweeter with 90° x 90° Bi-Radial Horn
Well there are a fair number of horn-type tweeters out there but most seem to be either harsh, sqwaky, or some combination of both.
NOT these.
I have been searching for an efficient horn tweeter for home audio, home theatre, and high-performance car audio and finally, here it is!
What made me a believer was when I used a set for a home theatre system where the customer wanted "Real-Thertre loudness & presence". These horns were one of the STRONG points of the finished system!
Suprisingly smooth, definitely present, and so efficient I could pad them, thus increasing power handling as the front channel was being driven by a Threshold S/500 amplifier!
I left envious of both the energy of the system & the sound quality. It was not only LOUD AS HE!!, it was clean & musical!
These hit their target with class, finesse`, and room to spare.
Buy them!
...But save me a few, alright?
|
|
|
Eminence APT-150 Super Tweeter with 100° x 50° Horn
Very crisp sounding and very clear !
|
|
|
Pyle Pro PDBT38 Titanium Super Tweeter
THREE OF THESE PYLE SUPER TWEETERS WERE ADDED TO FRONT CHANNELS CONSISTING OF JBL AND KLIPSCH SYSTEMS ( WHICH WERE SWEET ALREADY) AND BOOM!, DELICATE HIGHS AND NUANCES CAME ALIVE ON ALL MATERIAL..STEREO MUSIC AND THEATER! WORTH MUCH MORE THAN THEY COST.
|
|
|
Selenium ST324 Super Tweeter ABS Housing
I teamed these up with Eminence Red White and Blues guitar speakers in a horn enclosure crossed over at 4.5Khz. The result was super bright and efficient. They're plenty efficient for a 300B SET amplifier at 4 or 5 watts.
|
|
|
Pyramid TW18BK Bullet Horn Super Tweeter Pair Black
If you use these you'll have to get an L-Pad or run them with PA speakers. These little things can send shivers up your spine from a violin solo. Finish is average.
|
|
|
Selenium ST200 Super Tweeter
i was amazed this tweeter has the same equality as the upper end selenium tweeters. It plays like a silk dome tweeter not harsh on the ears. Im runnin them n a car by tha way.
|
|
Pyle Pro PH44 4" x 4" Horn Mid-Tweeter
The terminals were shorted against the magnet. I managed to repair 6 of the 7 that I have purchased but I cannot trust the repair and will have to replace. Also note that these are NOT Tweeters. The are mid-range. They roll off around 12kHz
|
|
Pyle Pro PDBT28 Titanium Tweeter
i blew 2 of them in one day
|
|
|
Pyramid TW18 Bullet Horn Super Tweeter Pair Aluminum
high output, relativley composed for a bullet, minimal harshness, like to be crossed 5khz and up.
|
|
|
Pyle Pro PDBT58 Titanium Super Tweeter
I'd long been intrigued by this tweeter, and ultimately broke down and purchased a couple. Well, that is the Audiopipe version, which I'm told is identical.
This beast is highly unusual, like none I've ever tested or used. For starters, the typical 3 to 4uf capacitor will barely yield a peep on this model. This doesn't make sense, but it needs a value of around 150uf to kick in at about 3khz (on paper, it s/b around 400 hz!). For top end clarity's sake, I use a Dayton m.p. 1.5uf cap in parallel. Mounting is a pain; you'll need to make a template and rear mount it.
If you can deal with that, you'll be rewarded with what is in my opinion the best sounding tweeter in the universe. The detail/etching is scary good, especially above 10k where it really shines; response razor flat (on axis), transients and dynamic range lively, plays extremely LOUD without a peep of distortion, and is super efficient--it matches well with any of those 102db+ 12" guitar speakers.
They're not cheap, but given their performance, I'd pay a lot more and still consider them a bargain. Whatta sleeper!
|
|
|
Constant Directivity Horn
These look expensive and are a good efficiency match for the Carvin PS-8 bass drivers I am using them with. They get occasional PA use but spend most of their time in my wood shop. They can play loud. I am thinking of building another pair using these with a pair of the Dayton 6" PA drivers. I am using a series crossover configuration at about 2.5K.
|
|
|
Selenium DT150 Super Tweeter with 4"x4" Horn
Used this in a bass cabinet crossed over @1.6 and used a 100 watt volume control with it. It worked great.
|
|
|
Selenium ST304 Super Tweeter ABS Housing
This Super Tweeter is good to add in your car pretty nice sound good for techno dance
|
|
|
Heavy Duty Titanium Super Tweeter
i started out with one because i was very skeptical but now i have 4 on two pairs of large stereo speakers. they have a very flat response with no noticeable ring like you would expect from a titanium bullet. they sound better than there siblings and handle more power. 116 db per watt so l-pad or resistors are most likely needed. ultimate dj tweeter with higher quality than any horn. not as idiot proof as the piezo horns because i have already burnt one up showing off to friends. but it took 4 times the rms wattage before it cut out unexpectedly. it never once distorted. very impressive thumbs up
|
|
|
B&C DE35 Neodymium Mylar Bullet Tweeter
This is a world class tweeter! Wide even dispersion, flat response, no distortion. I've spent alot more for tweeters and gotten a lot less. I am using this passively crossed above the B&C 2" DE750 and it put the finishing touch on the system.
|
(74 reviews)
(51 reviews)
