|
2.5mH 14 AWG Perfect Layer Inductor
more than met my expectations
|
|
|
Jantzen 0.35mH 20 AWG Air Core Inductor
The only problem with this product is having to wrap the inductor with mylar tape. The speaker project I completed sounds great! I used speakers I had hooked-up before with an off the shelf crossover and packed away in disgust when the sound was terrible.
|
|
Jantzen 0.30mH 20 AWG Air Core Inductor
inductor used in 6db/octave x-over. works as it should. a pair of them used in upgrading cheap outdoor speakers is proportionatley high compared to the overall cost of the speakers and the other upgrades (changed capacitor on tweeter and attenuated tweeter w/ l-pad). this is the .30mH cheapest inductor available from parts express. worth it. no multi-driver loudspeaker should be w/o xover.
|
|
|
Jantzen 0.50mH 18 AWG Air Core Inductor
Jantzen makes good products. This is manufactured well.
|
|
|
Jantzen 2.0mH 20 AWG Air Core Inductor
I tried out 3 different 12" woofer's with this inducter trying to make a decision , there was no distortion in all 3. With 160 high current w/ch it works flawlessly.
|
|
|
Jantzen 3.0mH 20 AWG Air Core Inductor
I wish the label they put on the outside was affixed a little better. It has a tendency to come off with the protective wrapping put on for shipment.
|
|
Jantzen 2.0mH 18 AWG Air Core Inductor
There isn't anything to compare this with. There aren't any others, that I can see, that are 18 AWG to compare it with. Although I think Jantzen makes good products.
|
|
|
Jantzen 0.95mH 18 AWG Air Core Inductor
If you can measure and match them fairly precisely (inductance AND DCR) then these are great replacement for the cheap iron/ferrite core inductors found in many commercial speakers. DIYers who build their speakers from the ground up - why use anything else? Perhaps you could do better with foil or litz based coils but be prepared to pay dearly for it.
Bottom line: Excellent product, great price/performance ratio - I couldn't be more pleased.
|
|
|
Jantzen 1.0mH 15 AWG Air Core Inductor
I have used Jantzen air core inductors and they the best one around. I have tried other brands but so far Jantzen is the best and I would recommend it to everyone and will also continue to use them.
|
|
|
Jantzen 0.33mH 18 AWG Air Core Inductor
Dudes - what's a speaker building affectionaldo without an inductor?! Good goods, copper is expensive, unfortunately.
|
|
|
Jantzen 0.37mH 18 AWG Air Core Inductor
Used this inductor on the high pass side along with erse inductors on the low pass side! Functions well along with the other coponents for a nice sound!
|
|
|
Jantzen 0.55mH 20 AWG Air Core Inductor
Thanks. We amateur DIY speaker builders need these quality components. Thanks.
|
|
|
Jantzen 0.60mH 18 AWG Air Core Inductor
If you need just a good all round air core inductor then these are a good brand to use. I have used them several time with typical success!
|
|
|
Jantzen 0.70mH 20 AWG Air Core Inductor
Used This Inductor On The Tri Trix Project And A Small 2 Way Project Using The Same Dayton Speakers On The Tri Trix! Used On The Tweeter Side And Helps Deliver The Best Sound Possible From Dayton Tweeters! Just By Looking At The Picture, You Can Tell They Are Well Made. A Good Product!
|
|
|
Jantzen 0.80mH 20 AWG Air Core Inductor
Jantzen products are all well made. Onley thing I wish was that their label was a little better. Sometimes they come off with the protective wrapping that is put on.
|
|
|
1.5mH 14 AWG Perfect Layer Inductor
Came packaged securely, well-constructed, measured value was dead-on. Note: The DCR for this value measured 0.40 ohms versus the advertised 0.28 ohms.
|
|
|
Jantzen 0.10mH 18 AWG Air Core Inductor
I like these inductors, but I wish they used a plastic label with more adhesive so that it stays affixed to the product better.
|
|
|
0.40mH 14 AWG Perfect Layer Inductor
good product works just like it should at a good price
|
|
|
0.60mH 18 AWG Perfect Layer Inductor
Substituted This Inductor For The Jantzen Inductor (Out Of Stock) For The Tri Trix Project! I Have No Complaints Whatsoever. The Woofers Function Nicely And The Overall Sound Of The Tri Trix Speaker Is Very Very Nice. This Is One Nice Speaker Project. I Am More Then Pleased. I Can't Say Enough About All The Components Used In The Making Of The Speaker Set!
|
|
|
0.70mH 18 AWG Perfect Layer Inductor
Winding and varnishing quality is high. Inductance was within 1% for all 4 pieces I ordered.
|
|
|
0.80mH 14 AWG Perfect Layer Inductor
This was the most expensive of the crossover upgrades I've done. But it made an obvious and immediate improvement over the factory original ferrite core inductor.
|
|
|
0.80mH 18 AWG Perfect Layer Inductor
Used this coil along with other Erse coils in a 3rd order butterwoth crossover design! Items have performed well for a great sound on both the low and high pass sides!
|
|
|
1.0mH 14 AWG Perfect Layer Inductor
Ordered a total of 4 these and they all measured within 2% of the published specification, which is actually quite good. They do what they are supposed to do at a reasonable price for the wire gauge.
Made in the USA was a big plus for me.
|
|
|
0.15mH 14 AWG Perfect Layer Inductor
These inductors do the job perfectly. They are good quality and sound fine in my crossover network. Great for the budget too!
|
|
|
0.15mH 18 AWG Perfect Layer Inductor
Looks very nice will be installing in car today
|
|
0.24mH 14 AWG Perfect Layer Inductor
The product was as it said it was. Not outstanding in price for me, but convenient to purchase with the other things that I needed on this website.
|
|
|
0.27mH 18 AWG Perfect Layer Inductor
Sound Great. Very close tolerance. Great value.
|
|
|
0.30mH 14 AWG Perfect Layer Inductor
Good heavy inductors. Well made. Low resistance. Minimal loss to heat under high current.
|
|
|
Jantzen 0.10mH 20 AWG Air Core Inductor
I bought this inductor to build me an speaker impedance compensation network for my 8 ohm speakers that have 2 5.25" woofers, and 1 0.75" doom tweeter to incorporated with my speaker's existing crossover network that have a manufacture design flaw that causes tweeters to burn out with an 80 watt per channel audio amplifier that was caused by low impedance at the tweeter upper audio frequency range, and my speakers are suppose to be rated at 150 watts. My 8 ohm speakers from 5000 Hertz to 20000 Hertz drops down from 8 to 3.3 ohms impedance in which my speakers sound very tiny like too much treble and it cause my tweeter to fail.
I use this 100uh inductor to for my speaker's impedance compensation network incorporated with my design flaw crossover, and I ran my 80 watt per channel audio amplifier for 8 hours at maximum power, and that 100uh inductor performed very well, and it did not even get warm; plus it gave my speakers a excellent loud sound without too much tiny or treble sound, and my tweeter didn't blow out.
If you're planning to build passive crossovers or impedance compensation networks for 150 watt speakers in the tweeter section, this type of inductor is excellent to use.
|
|
|
Jantzen 0.20mH 15 AWG Air Core Inductor
A rezl nice little inductor. Well made dead on accurate/ tolerance.
|
|
|
Jantzen 0.20mH 18 AWG Air Core Inductor
Very good construction and works very good
|
|
|
10mH 18 AWG Perfect Layer Inductor
We are not using this inductor as you normally would. This inductor is used as an output coil for a magnetic pulser as in electro-medical device as in alternative healing methods as in Dr. Bob Beck protocol. Bob Beck invented the original electronic flash to replace disposable photographic flash bulbs. Our unit creates a pulsating magnetic field that can penetrate about 10 inches of body tissue. It is handing up to 15 pulses a seconds and after 10 minutes gets very hot to the touch. The output is approx. 50 kilogauss. At this time we turn it off and let it cool down. We have encapsulated it in epoxy resin with a handle added to make a wand. The north side of the magnetic field it produces is applied to diseased parts of the body. We have had great success with this part and the amplifier pulser unit that drives it. Parts Express is the only company where we have been able to obtain this part. The inductor is very nicely built and tightly wound. Thank you Parts Express!!!
|
|
|
2.0mH 18 AWG Perfect Layer Inductor
I used these as crossovers in my sub cabs.
Work great low distortion even at high volume.
|
|
5.0mH 18 AWG Perfect Layer Inductor
Although a bit pricey, these inductors in combination with capacitors offer good reliability and performance.
|
|
|
Jantzen 0.90mH 18 AWG Air Core Inductor
I have a 4th order Linkwitz-Riley passive crossover project. This air core inductor working excellent. I use a tube preamp and tube PP "class A" power amp to drive the speaker thu this crossover. The high horn speaker sound is clear. The mid-range JBL speaker vocal is REAL and image is well defined. The woofer 10" has power-bass. The vocal sound image is very very good image and real.
|
|
|
Jantzen 0.90mH 20 AWG Air Core Inductor
If you can measure and match them fairly precisely (inductance AND DCR) then these are great replacement for the cheap iron/ferrite core inductors found in many commercial speakers. DIYers who build their speakers from the ground up - why use anything else? Perhaps you could do better with foil or litz based coils but be prepared to pay dearly for it.
Bottom line: Excellent product, great price/performance ratio - I couldn't be more pleased.
|
|
|
Jantzen 0.75mH 15 AWG Air Core Inductor
quality
|
|
|
Jantzen 0.80mH 18 AWG Air Core Inductor
nicely wound wire, works great. decent price too, a lot cheaper than some of the other thicker coils.
|
|
|
Jantzen 0.70mH 18 AWG Air Core Inductor
I wish the label they put on the outside was affixed a little better. It has a tendency to come off with the protective wrapping put on for shipment.
|
|
|
Jantzen 0.56mH 18 AWG Air Core Inductor
Jantzen Offers Good Quality Inductors For Any Crossover Design! Use Them In Conjunction With Daytons 1% Precision Capacitors And You Will Have A Top Notch Speaker System!
|
|
|
Jantzen 0.40mH 20 AWG Air Core Inductor
The only problem with this product is having to wrap the inductor with mylar tape. The speaker project I completed sounds great! I used speakers I had hooked-up before with an off the shelf crossover and packed away in disgust when the sound was terrible.
|
|
|
Jantzen 0.44mH 18 AWG Air Core Inductor
Good tight windings, rather thin overall coating, would like to see a second dip in laquer.
|
|
|
Jantzen 0.45mH 20 AWG Air Core Inductor
The coils on my cheap, generic, crossovers were made of snips and snails and puppy-dogs' tails. I can't complain too much because the crossovers were so inexpensive, they were practically free. Ironically - at four bucks - Jantzen 20s are an amazingly inexpensive component for a second-order high-end crossover that needs a coil to go with the cap. Honestly, I can't believe I only paid $4 for this part, which is not Jantzen's top coil but practically overqualified for this job. It ran laps around what I had, making it a great bargain for the price.
|
|
|
Jantzen 0.47mH 15 AWG Air Core Inductor
I have used this name before with consistantly good results. Well made, excellent toleraces a spot on good product.
|
|
|
Jantzen 0.47mH 18 AWG Air Core Inductor
I have a 4th order Linkwitz-Riley passive crossover project. This air core inductor working excellent. I use a tube preamp and tube PP "class A" power amp to drive the speaker thu this crossover. The high horn speaker sound is clear. The mid-range JBL speaker vocal is REAL and image is well defined. The woofer 10" has power-bass. The vocal sound image is very very good image and real.
|
|
|
Jantzen 0.50mH 20 AWG Air Core Inductor
Use this inductor in a third-order high-pass 2,000 Hz crossover with a C1=6.8 and C2=20 Uf solen capacitor for a 12" woofer- to- horn topology with crossover wired between woofer and horn, with no low-pass section. Am using the speaker as a monitor in a rock band and have about 300 watts into 8 ohms running through them with NO distortion what-so-ever! Have been using them for about 2-years now with complete confidence! For the price, I don't think you will find a better inductor. Highly recommended!
|
|
|
Jantzen 0.55mH 15 AWG Air Core Inductor
All Jantzen's air core inductors are well made and a good value.
|
|
|
Jantzen 1.0mH 18 AWG Air Core Inductor
a neutral inductor, on par with the North Creek inductors of similar gauge. Nice looking finish, exudes quality
|
|
|
Jantzen 1.0mH 20 AWG Air Core Inductor
If you need just a good all round air core inductor then these are a good brand to use. I have used them several time with typical success!
Just wished copper was not priced as high as gold is these days!!!!
|
|
|
Jantzen 1.1mH 18 AWG Air Core Inductor
very nicely wound wire, works great in my crossover
|
|
|
Jantzen 1.2mH 18 AWG Air Core Inductor
I have a 4th order Linkwitz-Riley passive crossover project. This air core inductor working excellent. I use a tube preamp and tube PP "class A" power amp to drive the speaker thu this crossover. The high horn speaker sound is clear. The mid-range JBL speaker vocal is REAL and image is well defined. The woofer 10" has power-bass. The vocal sound image is very very good image and real.
|
|
|
Jantzen 1.2mH 20 AWG Air Core Inductor
This coil is well-made, solid construction, wound within .1 dcr rated accuracy.
|
|
|
Jantzen 1.3mH 18 AWG Air Core Inductor
Used This Inductor On The Low Pass Side Along With Dayton Precision 1% Tolereance Caps./3000 Hz. For A Center Speaker Project! Sound Was Smooth And Effortless with Good Imaging. Used Dayton Reference 6" Drivers (2) For This Project!
Well Made Inductors/Quality Product!
|
|
|
Jantzen 1.4mH 18 AWG Air Core Inductor
Sounds great with their Goldwood heavy duty woofers.
|
|
|
Jantzen 1.5mH 15 AWG Air Core Inductor
A good solid choice for an air core inductor! Tightly wrapped and specs out perfectly
|
|
|
Jantzen 1.5mH 18 AWG Air Core Inductor
Coil measured .67 ohms. I wasn't paying enough attention when I ordered it or I would have opted for a larger wire diameter.
|
|
|
Jantzen 1.7mH 18 AWG Air Core Inductor
Have Used Jantzen Inductors In Several X-over Designs For Excellent Results. Used This Inductor On The Low Pass Side (2300 Hz) On An MTM Design Using The Ref. 6" Driver. Very Nice Results!
|
|
|
Jantzen 1.8mH 15 AWG Air Core Inductor
good quality and price
|
|
|
Jantzen 5.0mH 18 AWG Air Core Inductor
I have a 4th order Linkwitz-Riley passive crossover project. This air core inductor working excellent. I use a tube preamp and tube PP "class A" power amp to drive the speaker thu this crossover. The high horn speaker sound is clear. The mid-range JBL speaker vocal is REAL and image is well defined. The woofer 10" has power-bass. The vocal sound image is very very good image and real.
|
|
|
Jantzen 2.2mH 18 AWG Air Core Inductor
This precision wound coil works perfectly in my crossover design.
|
|
|
Jantzen 2.5mH 18 AWG Air Core Inductor
I have a 4th order Linkwitz-Riley passive crossover project. This air core inductor working excellent. I use a tube preamp and tube PP "class A" power amp to drive the speaker thu this crossover. The high horn speaker sound is clear. The mid-range JBL speaker vocal is REAL and image is well defined. The woofer 10" has power-bass. The vocal sound image is very very good image and real.
|
|
|
Jantzen 2.7mH 15 AWG Air Core Inductor
Well made with tightly wound coils solidly glued together. However, as with most inductors on the market, the value in mH is actually lower than specified (2.54 against 2.7). Since the R value is lower too (0.54 vs 0.59 Ohms) than the specs, this suggests some coils are missing that would have been needed to arrive at the proper value. Thus medium rating for peformance.
Present copper prices are around 3.5 $/Lbs, so this coil represents a bit over 5 dollars worth of copper. Thus a 3 for value.
|
|
|
Jantzen 3.0mH 18 AWG Air Core Inductor
Used this Inductor on the low pass side of a 3-way design using a 7" reference driver. Inductor does its job and functions as advertised. Can't ask for anything more!!!
|
(74 reviews)
(51 reviews)
