|
Dayton MH111 Steel Bar Handle
These handles are great. I use these in my stage subs. Very sturdy. Can easily get gloved hands in as well.
|
|
Penn-Elcom H7154K Spring Flex Cabinet Handle Black
Works great
|
|
Dayton MH119 Recessed Flip Handle Black
Just received 4 of these new Dayton spring loaded handles. 3 of 4 failed immediately out of the package and the spring is sprung causing them to not retract but stay stuck out away from the cabinet.
|
|
|
Penn-Elcom H1014K Extra Wide Strap Handle Black End Caps
see above
|
|
|
Penn-Elcom H1053K Surface Mount Handle Black
These are good as they don't require cutting a recessed hole into the cabinet. They also have a vibration resisting handle which is spring loaded.
|
|
|
Penn-Elcom H1105 Deluxe Steel PA Cabinet Handle
Very Good welds and very good finish.
|
|
|
Strap Type Handle
Can't say much about this handle. Good price & I've used many of them throughout the years without any apparent problems.
|
|
|
Penn-Elcom H7154Z Spring Flex Cabinet Handle Zinc
I was looking for spring loaded handles with a rubber handle and flush mount. Perfect, just perfect...
|
|
Plastic Cabinet Handle
Do not try to carry the VX2500 cab by just one handle. It will break, which is why I am ordering one from here.From now on I will carry the cab vertically using both handles. Lesson learned.
|
|
|
Dayton MH120 Surface Mount Flip Handle Nickel
These Super Strong Handles are Spring Loaded and Do Not Rattle. Looks good on my Guitar Cabinet.
|
|
|
Dayton PH116 Plastic Bar Handle
I bought these handles a couple of years ago for my DJ console. They work pretty well, but I would advise not to pull outward on them. I made that mistake, and the handle broke off. If you buy them, make sure you mount them on the vertical sides of your equipment so you only pull up on them, not outward.
|
|
|
Dayton PH114 Plastic Pocket Handle 4-Sided
Great for 2x12 guitar amp cabinets. Very sturdy and offers carrying flexibility. Use with machine screws and T-Nuts. Very easy to install. Cut a 5 - 15/16" circle, 4 - 1/4" holes for machine screws and your done.
|
|
Dayton PH115 Large Plastic Handle
You might be better off with metal handles if you take your gear out on the road.
|
|
|
Dayton MH110 Right Angle Steel Bar Handle
these handle are greeat. work well with recessed casters just tilt & rol your speaker away. just make sure you do a 3/8" or 1/2" round over with your router so they fit perfectly
|
|
|
Penn-Elcom H1053Z Surface Mount Handle Zinc
I use these all the time for smaller road cases. They're easy to install, strong, and work great.
|
|
|
Penn-Elcom H1014N Extra Wide Strap Handle Nickel End Caps
I used this handle on a custom-made guitar amp cabinet. It's a little wider and longer than the tradtional Fender style handle, but stronger and less costly. Recommended.
|
|
|
Dayton MH112 Large Steel Bar Handle
These handles really hold up :)
|
|
|
Dayton MH121 Surface Mount Flip Handle Black
The product is excellant.
|
|
Penn-Elcom 0323BK Strap Handle with Nickel End Caps
These are great except the strap handle doesn't extend and retract easily. The function operates much too stiffly for normal ease of use, probably because the handle portion is too thick compared to the end caps height thus causing it to bind. I guess that's why the price is low. :(
|
|
|
Penn-Elcom H1024 PA Cabinet Handle ABS/Aluminum
Value wise a very good choice for the money.
|
(74 reviews)
(51 reviews)
