|
Dayton RCAC-RG6 RCA Male Crimp-On For RG-6/U & Quad
This is a quality connector. Works well once you figure out cable cutting and prep dimensions.
Should come with directions for cable stripping
dimensions. Proper dimensions are critical to
proper functioning.
|
|
|
P3 RCA Connectors Satin Nickel Finish 2 Red/2 Black
For an economical connector the performance is very high, and should provide years of service. Installation was found to be above average and satisfaction is yours to enjoy.
|
|
Rean NYS352G RCA Plug Gold
good luck getting ANY wiring into these things. solder, crimp, all to no avail with the crumbling tabs. No thanks, steer clear!
|
|
|
Rean NYS373-0 RCA Plug Black Shell
These plugs are a great value. They come with two "spring" style strain relief options so you can match your cable thickness. The positive and negative connections are medium gauge (as opposed to super thin like some cheap components), and of course they are gold plated. The body part is, I think, anodized aluminum, but somehow ends up looking a little plane. While they don't ooze "expensive" like some boutique parts they seem to do the job just fine.
|
|
|
Dayton RCAGS-LK Locking RCA Plug Solder Type 2 Pair
Another P.E. high quality/lov price product. Identical internal construction to some high-end plugs. Heavy duty build and locking feature make them useful in high stress environments and mobile installations. Locking feature can be difficult to use when RCA jacks are closely spaced, as in HT equipment. Build quality not to WBT standards, but you get four plugs for less than the price of one WBT. Works great with Dayton MSC cable.
|
|
|
Dayton RCAGS-ST RCA Plug Solder Type 2 Pair
I was surprised by these connectors' features. The strain relief is formed by an insulation-gripping pair of "teeth" that really hold the cable in place during soldering. I used the inside section of standard pliers to lightly crimp this area closed. Another great feature is the shield termination area. There is a small ~10 angled and recessed solder cup punched right into the sleeve "arm". It made soldering and the shell assembly an absolute breeze.
In terms of performance, these things grip like there's no tomorrow. It is advised to twist while removing them or you'll be there all day.
|
|
Dayton RCAX-AU Audiophile Locking RCA Connector 2 Pair
I had no idea, that this quality of RCA connector could be purchased for this price. Using RG6 for analog interconnects and these connectors is as good as it gets. The connectors allow you great shield termination, and the locking feature allows for the best connection to your equipment. These babies are built like a tank, if your using coaxial cable for interconnects, you can't go wrong with these.
|
|
|
Rean NYS373-2 RCA Plug Black with Red Indicator
I've used these connectors for several projects and they work great. Especially nice is the two different sizes of included strain reliefs, allowing for thick or thin cables to be used. The plug grips the jack very snugly for a solid connection that won't accidentally come unplugged. The only minor gripe is the colored ID stripe breaks easily. I recommend removing it and painting the color ring with model paint before using if the ID color is important.
|
|
F-Conn Gold RCA Male Connector RG-6/Quad RG-6 5 Pcs.
fast and easy to install, makes good connection, does require a compression tool to install. I use the Cable Pro CPLCCT-SLM.
|
|
|
RCA Plug Black Plastic
Exactly what I needed, a hard to find replacement RCA plug. Required some sotering.
|
|
|
Gold RCA Super Plug Red 6.3mm Cable Entry
i was dissapointed. The cover is some plastic stuff that feels cheap. Go for something else.
|
|
|
RCA Plug Crimp-on For RG-59/U Coax
I make alot of sheilded audio cables in multiple lengths and these are some of the easiest and strongest that I have ever used. After soldering the fluted tip, the plug is very stronge with very low resistance.
|
|
|
RCA RG-59 Compression Connector
This connector, like the other RCA compression connectors out there, takes some practice to learn how to terminate. Try 5/32 of bare copper; 5/32 of inner core insulation. Cut away braid entirely. Make 2 slits in the outer the outer insulation to ease insertion of the plug. You will feel the center conductor slip into its place. You must use a professional compression tool to finish the job.
|
|
|
Gold RCA Plug For RG-59 Coax Pair
Wont pull you RCA connectors out of your equipment.Requires a little skill assembling or you snap the core wire.Perfect fit every time...
|
|
|
F-Conn Commercial RCA Male Connector RG-6 5 Pcs.
Never second guess if your continewity is good or not, ever again.
|
|
|
F-Conn Commercial RCA Male Connector RGB 22-24 Ga. 5 Pcs.
They are a little tough to do correctly at first, I wasted 3 until I figured out how to keep the center pin in place then broke 1 more. The center pin wiggles a bit (factory made connectors don't). Used the tool offered here, other compression tools don't look like they'll work.
Even with the learning curve and less-than-factory quality, these are well worth it considering I ran a separate cable through the walls and now have an exact length cable. If I bought this as a cable it would have been much more expensive and it wouldn't fit inside the walls.
I'd buy these again.... Wait, I just did to make some more custom cables.
|
|
|
Rean NYS373-9 RCA Plug Black with White Indicator
I've used these connectors for several projects and they work great. Especially nice is the two different sizes of included strain reliefs, allowing for thick or thin cables to be used. The plug grips the jack very snugly for a solid connection that won't accidentally come unplugged. The only minor gripe is the colored ID stripe breaks easily. I recommend removing it and painting the color ring with model paint before using if the ID color is important.
|
|
|
Switchcraft 3502A RCA Plug Nickel
I've been using these for 20 years. They're the only DIY RCA males I ever buy. Just a solid, reliable, easy-to-use, reasonably-priced part with no marketing/tweako BS. Highly recommended.
|
|
|
Gold RCA Super Plug Black 8.3mm Cable Entry
Large opening for the cable, very attractive styling and overall quality make this product
very arrtactive
|
|
|
Neutrik NF2C-B/2 Profi Professional RCA Plug Pair
Good Plugs, nice solder points, good precision feel.
|
|
|
Rean NYS352 RCA Plug Nickel
This plug is every bit as good as a Swithcraft at 1/2 the cost. You can't go wrong
|
|
|
WBT 0147R Midline Miniature RCA Solder Connector Red
I made my own interconnect using WBT connectors some 20 years ago. Improvement been made and quality is very high as usual. Will definitely use it once again.. hopefully in another 20 years?
|
|
|
Gold RCA Super Plug Black 6.3mm Cable Entry
Very nice quality RCA at a very affordable price. The shell is indeed made of aluminum, and looks great.
|
|
|
F-Conn Gold RCA Male Connector RGB 22-24 Ga. 5 Pcs.
This connector, if installed properly, works excellent with the Carol 5X wire found on this site. It's a little tricky, but here's what I have so far.
The connector is a three piece connector. Follow the directions and after a couple tries you should be fine. One thing: make sure RCA nipple seats into connector with a click. That locks the nipple into place for compression when you finish.
The Carol wire number is 100-858.
This connector and associated wire works way better than the Belden 5X super mini wire and connectors associated with that wire.
|
|
|
RCA RG-6 Compression Connector
easy to use, but quite expensive at $2.25 and no redos
|
|
|
Gold RCA Super Plug Yellow 6.3mm Cable Entry
Easy to use solder RCA connector. Took a bit for the soldering iron to heat up the top lead. No reason to buy any of the more expensive connectors.
|
|
LRC Snap-N-Seal RCA Connector Blue
These were hard to use compared to the regular (non colored) snap and seal connectors and resulted in 1 in 3 not sealing and had to be thrown away.
|
|
|
LRC Snap-N-Seal RCA Connector Green
These were hard to use compared to the regular (non colored) snap and seal connectors and resulted in 1 in 3 not sealing and had to be thrown away.
|
|
LRC Snap-N-Seal RCA Connector Red
These were hard to use compared to the regular (non colored) snap and seal connectors and resulted in 1 in 3 not sealing and had to be thrown away.
|
|
Monster PL2-B Phonolink 2 Standard RCA Connector Pair
Short ground / strain relief makes for a difficult solder. I prefer Dayton RCAGS-ST. Longer strain-relief with a hole and solder cup on OUTSIDE, making for a much easier connection.
Ground contacts are not heavy duty. They are too tight and break easily.
|
(74 reviews)
(51 reviews)
