300-265_ALT_9.jpg
300-265_ALT_9.jpg
 
300-265_ALT_9
 

Pro Wire ISF-147 Insu-Flate Ceiling Speaker Protector

Brand:| Model: ISF-147
Overview
Installing this low-cost speaker protector will prevent insulation from entering into the ceiling speaker's voice coil, causing destruction or very poor performance. With an overall diameter of 15" and a flexible fold-over rim, the Insu-Flate will fit almost every ceiling speaker on the market.
Highlights
  • Protect your ceiling speakers from blown-in insulation
  • Universal size
  • Quick and easy to install
Part # 
300-265
Weight: 0.12 lbs.  
IN STOCK
List Price$6.99
You Save29%
Your Price
$4.96
Buy 4-up$4.54
Part # 300-265
Qty:  EA
Available Payment Methods

Product Details

Pro Wire ISF-147 Insu-Flate Ceiling Speaker Protector

Blown-in insulation is one of the most cost effective methods of conserving energy in a home. This can present a problem to any home owner considering a whole house audio system. Most ceiling speakers feature open-back construction and are installed before the insulation is blown-in. Pro-Wire's Insu-Flate solves this problem. Installing this low-cost speaker protector will prevent insulation from entering into the ceiling speaker's voice coil, causing destruction or very poor performance. With an overall diameter of 15" and a flexible fold-over rim, the Insu-Flate will fit almost every ceiling speaker on the market. Sold individually.



Product Specifications
  • Special FeaturesCeiling Speaker Protector
Pro Wire ISF-147 Insu-Flate Ceiling Speaker Protector
  • BrandPro-Wire
  • ModelISF-147
  • Part Number300-265
  • UPC769381101606
  • Product CategoryCeiling Speakers
  • Unit of MeasureEA
  • Product Rating
    (12 Reviews)
  • Weight0.12 lbs.
  • California Prop 65

    Warning: California residents only. Please note per Proposition 65 that this product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Similar Products

View similar products to the Pro Wire ISF-147 Insu-Flate Ceiling Speaker Protector
in the Ceiling Speakers product category.

Reviews

Pro Wire ISF-147 Insu-Flate Ceiling Speaker Protector
Pro Wire ISF-147 Insu-Flate Ceiling Speaker Protector is rated 4.1667 out of 5 by 12.
Rated 5 out of 5 by from Time will tellSeems to do what it's supposed to. Only time will tell but I can't see how it wouldnt work
Date published: 2013-10-14
Rated 4 out of 5 by from Hard to install in remodel situationsWhen I first pulled these out of the package I was extremely disappointed. The cover was much larger than the product picture lead me to believe. There is a stiff metal ring that runs along the outer edge which can't be easily shrunk.I called Parts Express customer service for advice and they were very helpful.These are designed to be installed onto the ceiling drywall between 16" studs, NOT to be directly attached to the speaker.I used a household stapler to staple the material fabric to the drywall. This created a tight seal around my drywall hole where I would insert the speaker preventing insulation from coming back into the speaker, or the room during installation.
Date published: 2013-07-16
Rated 4 out of 5 by from Perfect for blown-in insulation.Great Product! I used these with 9 ceiling speakers and the Insu-Flate Ceiling Speaker Protector made the installation a lot less difficult. Drill the hole in the sheet rock, cut an "X" in the plastic sheet placed between the sheet rock and loose insulation, place its 15" wire rim between the plastic and sheet rock, pushed the rest of it up into the hole and was ready to install the speaker. I had to cut a small hole to run the wire, so you should use a piece of duct tape on both sides to seal the wire penetration.Thanks Parts-Express!
Date published: 2009-12-17
Rated 4 out of 5 by from Works. Forget shower capsI was going to use shower caps, like a lot of other people. But, I figured I paid enough for my speakers, why cheap out on protecting them? I used these with 2 sets of 6 1/2 inch speakers. It wasn't as difficult as some other reviews made it out to be to size these down to fit. All you do is fold them over (which leaves a nice hole for you to run your speaker wires through) and staple them to the lip of the drywall hole. I then went into my attic and put the blown-in insulation back on top of the speaker to increase the sound quality of the speakers. They sound great!
Date published: 2009-12-03
Rated 4 out of 5 by from Good ProductEasy to install. Used a staple gun to secure to sheet rock.
Date published: 2009-03-30
Rated 5 out of 5 by from Great ProductThis was great, easy to use and a quality product. I highly recommend using this product before blowing in the insulation as it was a pain to get this installed with the insulation existing (it kept falling on me). Once in place use duct tape instead of a stapler as it will/should hold better and prevent particles from entering. Very easy to use and high quality.
Date published: 2009-02-26

Product Q&A

Get your questions answered from other customers
who own this product or have experience with it.
If your question requires design or troubleshooting information,
please email tech@parts-expresss.com  for a prompt reply.
Pro Wire ISF-147 Insu-Flate Ceiling Speaker Protector

Customer Projects

Customer projects that include: Pro Wire ISF-147 Insu-Flate Ceiling Speaker Protector

If you built a project using this product, post it in the Parts Express Project Gallery.

Customer Discussions


If you would like to start a discussion about this product, post a thread in the TechTalk Customer Forum.
Get Deals
emailed to you every week.

Be the first to hear about new and exciting products,special pricing and incredible deals!

See This Week's "GET DEALS" Email
Parts Express
725 Pleasant Valley Dr.Springboro,OH45066USA
800-338-0531

© 1996-2014 Parts Express, All Rights Reserved

Host-Name:ZNODE1