Pro Co Guitar & Instrument Cable 90% Shield 1 ft. USA

Pro Co Guitar & Instrument Cable 90% Shield 1 ft. USA

Brand:| Model: WC-120SX-350
These professional grade guitar and instrument cables were designed to withstand the rigors of on road touring. Each cable features a 20 gauge stranded center conductor and a 100% coverage, extruded barrier PVC shield plus a spiral wound copper shield. 90% spiral copper shield.
Part # 
Weight: 0.054 lbs.  
Your Price
Part # 100-295
Qty:  FT
Available Payment Methods

Product Details

Pro Co Guitar & Instrument Cable 90% Shield 1 ft. USA

This professional grade Musicmover guitar, instrument and small signal cable was designed to withstand the rigors of on road touring and everyday use. Also perfect for making high quality low loise RCA patch cables. Each cable features a 20 gauge stranded center conductor and a 100% coverage, extruded barrier super flexible black PVC jacket plus a spiral 90% wound copper shield. ProCo Musicmover brand. Made in USA. .285"/7.25 mm OD Jacket. Sold per foot - minimum order 10 ft.

Product Specifications
  • Wire Gauge20 AWG
  • Jacket ColorBlack
  • LengthBy the Foot
Pro Co Guitar & Instrument Cable 90% Shield 1 ft. USA
  • BrandPro Co Sound
  • ModelWC-120SX-350
  • Part Number100-295
  • UPC703272028139
  • Product CategoryGuitar Cable & Instrument Cable
  • Unit of MeasureFT
  • Product Rating
    (12 Reviews)
  • Weight0.054 lbs.
  • California Prop 65

    Warning: California residents only. Please note per Proposition 65 that this product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Similar Products

View similar products to the Pro Co Guitar & Instrument Cable 90% Shield 1 ft. USA
in the Guitar Cable & Instrument Cable product category.


Pro Co Guitar & Instrument Cable 90% Shield 1 ft. USA
Pro Co Guitar & Instrument Cable 90% Shield 1 ft. USA is rated 4.3333 out of 5 by 12.
Rated 5 out of 5 by from good quality, great priceI bought 100'with some very nice nuetrik connectors for my guitar cables, I have had a very positive experience with it, very quiet, soldered well, very durable....I have been gigging with these cables and have held up longer than any others I have purchased assembled. ...I dont use crimp on connectors wth this cable as it is shielded that's counterproductive. ....if you use the appropriate connectors and have experience soldering you will be very happy with this cable. can't beat it
Date published: 2015-02-05
Rated 2 out of 5 by from Meh. Not what I expected.I picked this up to make some RCA interconnects after having done the same with similar-make Mogami instrument wire. The shielding wire, in this case used for the ground, is *really* thin, and came bunched up within the plastic/rubber outer coat. The Mogami shielding is sturdy gauge wire in a perfect packed spiral around the inner core. This ProCo stuff in comparison had lots of gaps where the shielding had bunched together; I don't know how they can call it 90% shield this way. Part of it, I am sure, is the thin-guage wire ProCo uses is difficult to lay flat with regularity. Also, the wire just doesn't tin nearly as easily as the Mogami; I felt I had to fight with it to make good quality solder joints. So, all 20 feet I bought is in the recycling bin. It might be fine for low-quality beginner projects, but even my mid-level hobby stuff requires something better than this. Also, if you haven't tried anything else, this might be just fine for you. But it's such a remove from what I am used to, and for the same price I can buy something much nicer. I love Parts Express, everything else I've bought from them is great quality, this single product happened to be a disappointment to me.
Date published: 2014-11-03
Rated 5 out of 5 by from Durable quiet cableI've used ProCo instrument cable for decades, not too expensive, quiet, durable, beefy conductor/shielding, not really any negative capacitance issues, of course you want to use G&H ends for best results,
Date published: 2014-08-01
Rated 5 out of 5 by from Excellent cableThis cable has great shielding while remaining flexible. It has greatly reduced the effects of RFI in my recording space. As somebody else noted, there is risk of signal loss if clamped too tightly to the connector. It also has to be pointed out that this cable has an outside diameter of .405" and most audio connectors are made for .250" cable, so some care must be taken in assembly. I would recommend three inches of heat-shrink tubing over the cable and the connector outer shell. I plan to order more and perhaps use speaker cable connectors.
Date published: 2014-06-02
Rated 5 out of 5 by from CableThis cable is very good quality. However, I found that I would mess up the cable by trying to pull it through my ends. This is not fault of the cable or the ends. The problem is that one is too big or the other is too small. I found that a little Vaseline on the cable will solve this problem. The sound coming though this cable is as good as any other cable you can buy.
Date published: 2014-02-25
Rated 3 out of 5 by from Good Audio Response but only fair insulator materialNice thick cable... good conductors... I just wish that the center insulator was more thick/durable or used a better material... the cable cannot withstand a very good crimping on the insulator for stress relief... I kept getting a slight resistive (ohmic) value when crimped which caused a slight grounding of the signal from the instrument... just don't over crimp the cable.
Date published: 2012-06-25
  • 2015-07-29T07:12CST
  • bvseo_cps, prod_bvrr, vn_cps_3.1.5
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_12
  • loc_en_US, sid_100-295, PRD, sort_mostRecent
  • clientName_PartsExpressInternational

Product Q&A

Get your questions answered from other customers
who own this product or have experience with it.
If your question requires design or troubleshooting information,
please email  for a prompt reply.
Pro Co Guitar & Instrument Cable 90% Shield 1 ft. USA

I just bought 30' of this cable and some Neutrik RA plugs. Then I thought about a stripper to use. Is there a dedicated stripper for this cable at PE?

Asked by: mikeb23
We do not have a dedicated stripper for this cable, although you could use a standard coax stripper and adjust the blade depths.
Answered by: MattP
Date published: 2014-11-06
  • 2015-07-29T08:51CST
  • bvseo_cps, prod_bvqa, vn_cps_3.1.5
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_1
  • loc_en_US, sid_100-295, PRD, sort_recentQuestionsFirst
  • clientName_PartsExpressInternational

Customer Projects

Customer projects that include: Pro Co Guitar & Instrument Cable 90% Shield 1 ft. USA

If you built a project using this product, post it in the Parts Express Project Gallery.

Customer Discussions

If you would like to start a discussion about this product, post a thread in the TechTalk Customer Forum.
Get Deals
emailed to you every week.

Be the first to hear about new and exciting products,special pricing and incredible deals!

See This Week's "GET DEALS" Email
Parts Express
725 Pleasant Valley Dr.Springboro,OH 45066USA

© 1986-2015 Parts Express, All Rights Reserved

Live Chat Software