Peavey PV 20 ft. High Z Mic Cable
Peavey PV 20 ft. High Z Mic Cable is rated out of 5 by 1.
Rated 2 out of 5
from Check the soldering on both ends before using.I needed a couple of high Z mike cables and the price of the Peavey cable (241-5668) was a good bargain as opposed of buying the components and building them. When I received the cables they required to be rewired for the particular microphone to operate properly. Please note the cables were not the problem it was the configuration of my mikes that required me to have to make changes.However when I opened the 1/4 phone plug I was shocked at the very poor soldering of the wiring. There was very little solder and were cold solder joints. The wires were splayed out and not even twisted. Therefore I checked the assembly of the XLR connector end and found the same poor soldering condition. I would caution anyone who is going to use these cables on stage to carefully check the soldering. It wouldn't take much handling to produce a failure. Yes I would recommend these cables with the caution to check the assembly before use.
Date published: 2013-05-30