Parts Express Free Shipping at 98 Dollars


Peavey Pro 15 Low Frequency 15" Speaker Driver

Brand:| Model: Pro 15
Peavey's Pro Audio replacement speakers are great for getting your Professional cabinet and DJ speakers up and running again, at an economical price.
Part # 
Weight: 14.15 lbs.  
List Price$85.99
You Save20%
Your Price
Part # 294-3122
Qty:  EA
Available Payment Methods

Product Details

Peavey Pro 15 Low Frequency 15" Speaker Driver

Peavey's Pro Audio replacement speakers are great for getting your Professional cabinet and DJ speakers up and running again, at an economical price. Kevlar® reinforced paper cones, Kapton formers with Nomex® stiffeners, and stamped steel frames increase durability without affecting sensitivity (for high output),  or power handling. Peavey Pro Audio replacement drivers work well in ported or sealed cabinets.

Product Specifications
  • Nominal Diameter15"
  • Power Handling (RMS)200 Watts
  • Power Handling (max)800 Watts
  • Impedance8 ohms
  • Frequency Response40 to 3,000 Hz
  • Sensitivity96.4 dB 1W/1m
  • Voice Coil Diameter2.5"
Thiele-Small Parameters
  • Resonant Frequency (Fs)34.4 Hz
  • DC Resistance (Re)6 ohms
  • Voice Coil Inductance (Le)0.74 mH
  • Mechanical Q (Qms)3.58
  • Electromagnetic Q (Qes)0.48
  • Total Q (Qts)0.43
  • Compliance Equivalent Volume (Vas)11.71 ft.³
  • Mechanical Compliance of Suspension (Cms)0.32 mm/N
  • BL Product (BL)13.35 Tm
  • Diaphragm Mass Inc. Airload (Mms)66.5g
  • Maximum Linear Excursion (Xmax)2.5 mm
  • Surface Area of Cone (Sd)855 cm²
Materials of Construction
  • Cone MaterialPaper / Kevlar
  • Surround MaterialCloth
  • Voice Coil FormerKapton® / Polyimide
  • Basket / Frame MaterialSteel
  • Magnet MaterialFerrite
Mounting Information
  • Overall Outside Diameter15"
  • Baffle Cutout Diameter14"
  • Depth6.5"
  • # Mounting Holes8
Optimum Cabinet Size *
  • Sealed Volume4.24 ft.³
  • Sealed F366 Hz
  • Vented Volume11.25 ft.³
  • Vented F336 Hz
  • * Enclosure volume/F3s based on BassBox "optimum" calculations-
Peavey Pro 15 Low Frequency 15" Speaker Driver
  • BrandPeavey
  • ModelPro 15
  • Part Number294-3122
  • UPC014367106428
  • Product CategoryWoofers, Subwoofers & Midrange Speakers
  • Unit of MeasureEA
  • Product Rating
    (6 Reviews)
  • Weight14.15 lbs.
  • California Prop 65

    Warning: California residents only. Please note per Proposition 65 that this product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Similar Products

View similar products to the Peavey Pro 15 Low Frequency 15" Speaker Driver
in the Woofers, Subwoofers & Midrange Speakers product category.


Peavey Pro 15 Low Frequency 15" Speaker Driver
Peavey Pro 15 Low Frequency 15" Speaker Driver is rated 5.0 out of 5 by 6.
Rated 5 out of 5 by from Great Speakers, Buy Them You Won't Regret it!I ordered my Peavey Pro 15" Speakers to replace some other speakers I had recently purchased from another seller but their speaker's lasted about 30 minute's. I was totally disappointed with their performance and the other seller. I poped in the Peavey Pro 15" Speakers to put them to the test, low and behold these speakers blew the house down. They were totally in control, crispy and provided seperior bass perforamce. Just what I needed to get the party jumping. I highly recommend these speakers to any DJ, key board player or for a PA system. I have two other 15" speakers that I will be replacing with the Peavey Pro 15" Speakers. Buy these and you will be glad you did.
Date published: 2013-11-29
Rated 5 out of 5 by from Great value - great soundI purchased one of these to replace the blown 15 in a Peavey cabinet I received as a gift. I am very impressed - it has a good, open rounded sound. Mucho speaker for the money !
Date published: 2013-11-29
Rated 5 out of 5 by from Sounds goodI bought this driver to replace a speaker in a Hartke VX series 215 cab. It sounds great, nice low in end sound.
Date published: 2012-02-22
Rated 5 out of 5 by from fastest shippingordered my speaker on monday and got it the next day always fast shipping and a great bussness to deal with thanks to all at parts express
Date published: 2011-09-10
Rated 5 out of 5 by from the best purchase ever foreali will like to thank parts express the shipping was before time love ya'll becuzz my speakear had blowed out and needed another one before the weekend and i got it thanks dj big bubb richmond,va
Date published: 2013-01-29
Rated 5 out of 5 by from Thunderous Bass, Stellar Value for Money!Typical Peavey excellence! At this price, these woofers are gems for bass guitar. I've used the die-cast Eminence Legend CB15, and these woofers stack up at half the price, they really do! Incredible value for money! In a sealed 3cu ft cabinet, crossed at 4khz to a 5 1/4" midrange, this makes for a killer bottom cab for bass guitar!In terms of bass response, it's deep, but fast and with good transient response. Wouldn't call these subwoofers, but these would be incredible in inexpensive PA mains. Midrange extension is good enough for 2-way use, and adds attack to aggressive bass playing, making it sound full.When compared to the slightly cheaper Pyle PPA15, these absolutely dominate. The 6db sensitivity gain and improved midrange extension make these Peaveys miles ahead of the Pyles in every way. Having owned and used both, I can say that there is absolutely no reason to buy the Pyles.I couldn't for the life of of me figure out why there haven't been any reviews on these, they're phenomenal! Buy some right now and give your bass rig or PA system an inexpensive jumpstart!
Date published: 2013-11-29

Product Q&A

Get your questions answered from other customers
who own this product or have experience with it.
If your question requires design or troubleshooting information,
please email  for a prompt reply.
Peavey Pro 15 Low Frequency 15" Speaker Driver

My question is in regards to speaker impedance.

While I do not consider myself an audiophile, I believe that depending on the speaker impedance that you use, the cooler or hotter your amp will run. Please correct me if I'm wrong. Therefore, if my amp states that I can use speakers with 6-16 ohms impedance, can I mix speakers in that range as long as they are in pairs?
Asked by: Gino
The full answer to that question is much more complicated than can be answered here, but a short, oversimplified version- impedance is resistance to an alternating current, and in some ways can be treated like resistance. The lower the impedance the more power it will draw from the amp, and if the impedance drops too low you will cook the amp.The impedance of a speaker changes with a number of factors, including the frequency that you're playing through it, and what you end up with when wiring multiple speakers somewhat depends, if wired in series you add the values under those conditions, where if wired in parallel you get a fraction of the values under those conditions ( 1/Rt = 1/R1 + 1/R2 +1/R3... ). Things like crossover networks further complicate this.
Answered by: Silverback
Date published: 2011-10-04

What other drivers/components can i add with this driver to make a good sounding speaker?

Asked by: The cake hoss
It's not really designed for that kind of use, typically it would be used in a guitar/instrument bass cabinet.I've seen these kinds of speakers used successfully in subwoofer/DJ bass cabinet type applications, but you'd have a pretty difficult time putting them in a typical 2 or 3 way enclosure and ending up with a well balanced package. You could probably pull it off with some tinkering with a custom crossover network but there would be better choices for that kind of thing.
Answered by: Silverback
Date published: 2011-10-04

Can this speaker be used to replace a blown 15" JBL in my Home System?

Asked by: Gino
yes. Over kill . For home use.
Answered by: waldens audio
Date published: 2011-10-24

how much does the magnet weigh?

Asked by: Yoran
I am sorry, Peavey does not currently provide a magnet weight specification on this driver.
Answered by: Chrisf
Date published: 2013-01-07

Are these the correct drivers for replacing a pv215 cabinet?

Asked by: vinnycharles
Yes these are the correct replacement drivers for that model.
Answered by: MattP
Date published: 2013-03-02

is this the PRO 15-8 Neo speaker

Is this the Speaker with Neodymium Magnet??
Asked by: kajj
Unfortunately no, this uses a standard ferrite magnet. It looks like Peavey discontinued the neo version.
Answered by: MattP
Date published: 2013-03-22

Customer Projects

Customer projects that include: Peavey Pro 15 Low Frequency 15" Speaker Driver

If you built a project using this product, post it in the Parts Express Project Gallery.

Customer Discussions

If you would like to start a discussion about this product, post a thread in the TechTalk Customer Forum.

Recently Viewed Products

Get Deals
emailed to you every week.

Be the first to hear about new and exciting products,special pricing and incredible deals!

See This Week's "GET DEALS" Email
Parts Express
725 Pleasant Valley Dr.Springboro,OH45066USA

© 1996-2014 Parts Express, All Rights Reserved