Bluetooth Module BT-1
The BT-1 module is designed to integrate wireless Bluetooth audio from smartphones, tablets, or laptops into speakers and subwoofers, car audio applications, and remote wireless amplifiers. Additionally, this module may be used to create a wireless link between a Bluetooth source and a traditional amplifier, receiver, preamplifier, or mixer.
Features of this Bluetooth v1.2 compliant receiver module include a small 2" x 1-1/2" form factor, a Class 2 range of up to 15 meters (49.2 feet), and 16-bit A2DP support for true stereo output. A USB A-Male plug and a stereo 3.5 jack are pre-attached to the module for quick connection and use. The USB A-Male plug is used as a power connection drawing 5 VDC off of the USB bus from a computer or powered USB hub.
Specifications: • Supply voltage: 3.3 to 5.0 VDC • Supply current: 50 mA • Operating frequency: 2.4 to 2.483 GHz • Bluetooth specification: v1.2 • Output power class: Class 2 • Receiver sensitivity: -80 dBm • Output level: 1V RMS • Output impedance: 1k ohm • Frequency response: 20-20,000 Hz (-3 dB) • Sampling: 44.1 kHz, 16-bit • Signal-to-noise ratio: 70 dB • THD: < 0.1% @ 1 kHz • Dynamic range: 85 dB • Channel separation: 65 dB • PCB dimensions: 2" W x 1-1/2" L • USB cable length: 18" • Audio output cable length: 18".
Note: This device only receives stereo Bluetooth audio. This device does not transmit a Bluetooth signal. The Sync/Pair button (as depicted in the manual) has been removed from the module as it was not necessary. The instructions have been amended to reflect this change.
