NuVo NV-A4DS Simplese Audio Distribution System w/Speakers

I recently installed the Simplese system for a client and used the Dayton in-ceiling speakers that come with the system. (Note to all: Purchase and use the NuVo Allport Tester for Simplese installations!) After getting ALL of the CAT5e terminations correct and the speakers installed the connections were a breeze. You set each Zone Control to the desired zone (1-4) then connect the speaker wires to the proper Zone terminals on the Allport, connect the CAT5e termials and install the Allport and Controls in low voltage wall boxes and your done. Since the components are somewhat price from NuVo, I purchased a Teac receiver to perform AM/FM tuner duties and used the client's satellite TV for satellite radio stations. I had to run extra cabling for connection of the satellite and the remote IR sending. About the remote control. This is very handy and versatile. There are IR receivers in each Zone Control that allows the universal remote to control ALL components connected to Simplese (Great Feature!). The sound and volume is adequate for normal listening volumes. The client is very satisfied with the results, so I am very pleased also!