RCF L15P200AK 15" Woofer Speaker
The L15P200AK woofer's generous voice coil length, heavier moving mass, and very low resonance combine for perfect low frequency reproduction. Remarkable linearity in the application range. Special treatments are applied to the cone surface and surround for optimum dampening characteristics. The L15P200AK finds its best application in bass reflex enclosures. It is a perfect solution for recorded music, cinema speakers, very low frequency monitoring, and applications where superb low frequency linearity is required. In 2-way systems, the L15P200AK works well when used in conjunction with large format compression drivers—also very good for high output 3-way systems. Popular replacement for the RCF/EAW LC-1514 low-mid driver found in the EAW KF850 loudspeaker system.
| PRODUCT SPECIFICATIONS |
| Power Handling (RMS) |
800 Watts |
| Power Handling (max) |
1,600 Watts |
| Impedance |
8 ohms |
| Frequency Response |
35 to 1,000 Hz |
| Sensitivity |
95 dB 1W/1m |
| Voice Coil Diameter |
4" |
| THIELE-SMALL PARAMETERS |
| Resonant Frequency (Fs) |
38 Hz |
| DC Resistance (Re) |
5.9 ohms |
| Voice Coil Inductance (Le) |
2.2 mH |
| Mechanical Q (Qms) |
6.80 |
| Electromagnetic Q (Qes) |
0.38 |
| Total Q (Qts) |
0.35 |
| Compliance Equivalent Volume (Vas) |
4.91 ft.³ |
| BL Product (BL) |
21.2 Tm |
| Diaphragm Mass Inc. Airload (Mms) |
121g |
| Maximum Linear Excursion (Xmax) |
9.8 mm |
| Surface Area of Cone (Sd) |
830 cm² |
| MATERIALS OF CONSTRUCTION |
| Cone Material |
Coated Paper |
| Surround Material |
Cloth |
| Voice Coil Wire Material |
Copper |
| Voice Coil Former |
Fiberglass |
| Magnet Material |
Ferrite |
| MOUNTING INFORMATION |
| Overall Outside Diameter |
15.20" |
| Baffle Cutout Diameter |
14.10" |
| Depth |
5.40" |
| # Mounting Holes |
8 |
| OPTIMUM CABINET SIZE * |
| Sealed Volume |
0.92 ft.³ |
| Sealed F3 |
93 Hz |
| Vented Volume |
2.40 ft.³ |
| Vented F3 |
55 Hz |
| * Enclosure volume/F3s based on BassBox "optimum" calculations |
- |
