Dayton SPINGS-2MM Speaker Pin Compression Type 2 Pair

I purchase these pin terminators because I had some flat speaker cable that I could not terminate the wire to the receiver in a manner that was correct. They worked fine but there is no give. They were kind of lose in the spring connection on the receiver I ended up taping up the connectors with tape so they would not ground out with each other. My luck something fell off the top shelf and snap off the end of one of the pin connectors

I bought these for amplifiers that have those spring loaded speaker cable connectors that are too small for the guage wire I use. These are perfect.

Connectors are well made, and easy to install.
The pins could be a little more flexible. I broke
one pin trying to create a slight bend because of
a space limitation.