Mills 2 Ohm 12W Non-Inductive Resistor

These resistors are the ONLY choice when building crossover networks or in line with a speaker to attenuate the volume. These are noninductive which means that they dont take anything from the speaker. Let me explain. A normal resistor is inductive which inductance is what coils do or cause when you use them in a crossover. Inductance keeps highs out of woofers or milliHenries. Inductance will cause the highs to roll off slightly. Example( lets say your speaker goes to 20k. Well if you use a regular resistor with inductance it will attenuate the speaker but now the speaker will not go above 18k, but if you use these Mills which are non inductive the speakers will be attenuated but still go to 20k.) Thats why I(a master speaker builder for a very reputable company)and you should ONLY use Mills Resistors.

I've used Mills over a long period of time, and found it to be good. So, the new 2 ohm should be no exception.