250w Subwoofer Amplifier
This item has been discontinuedClick here for our recommended replacement
This high performance amplifier has all the power and advanced features that you've been looking for! The adjustable phase control provides flexibility in subwoofer room placement allowing you to "shift" the phase and fine tune the subwoofer's output to their particular room environment. Until now, this feature was only found on high-end subwoofer systems costing thousands of dollars!
Specifications: Measured power output: 180 watts RMS into 8 ohms @ .1% THD, 272 watts into 4 ohms @ 0.2% THD Signal to noise ratio: 101dB (A-weighted) Dimensions: 10-3/8" W x 10-7/16" H x 3-1/4" D Enclosure cut out: 9" W x 9-1/4" H Voltage: Selectable, 115/230V, 50-60 Hz, 450W
A built-in rumble filter reduces power robbing subsonic frequencies to protect the woofer and increase amplifier headroom. The high power class AB design, produces clean, earth shaking bass, especially when mated with our 10" or 12" Titanic subwoofers.
The amp features gold plated high and low level inputs, continuously variable phase from 0° to 180°, level control, auto on/off (activated by input signal), and a second order (12dB) electronic low pass filter that is continuously variable from 40 to 160 Hz. It also features a 6dB high pass filter (125 Hz @ 8 ohm) output for satellite speakers and a line level output with a built in electronic high-pass filter.
This amp has thermal overload, and fuse protection for years of reliable use. Both, right and left stereo inputs are summed to a mono output, so only one amp is required per system. The pre-amp board is completely sealed with high-density foam to help eliminate air leaks around the inputs and controls.