Dayton H07E 6" x 6" Elliptical Waveguide 1" Threaded

These used to be 7x7". I don't know why, but they are proportionately smaller now. They sound roughly the same, with the exception of a higher Fo. They are only usable above approximately 2200 Hz. They still sound great though. Still worth the money, no doubt.

I purchased a pair of these to mate with 12's for a small venue system for my live audio production company. Selenium D210Ti drivers, 3.8Khz, 6db x-over, L-pad 7db for roughly 97db 1w/1m. They sound wonderful. My DBX 2231 eq is completely flat from 4k up. This waveguide is worth every penny. And with the sale price of $6, you CAN'T beat it. Drawbacks. Slightly resonant. I filled in the 1/2 inch voids on the back with fiberglass resin, and PRESTO! resonances gone. Also, not a very high gain product. It IS a waveguide though, so I wasn't expecting much anyway. Buy it. Don't hesitate. You won't regret it.

I changed out a blown JBL 1" titanium tweeter to
a horn tweeter ( an Eminince super tweeter with
a threaded adapter nipple ). The results are fabulous. The JBL was reated at 35 watts(2.5 KHZ), while the new is rated at 45 watts @2.5KHZ//85 watts@3.5KHZ). My Yamaha Pre-amp
allows me to set the crossover. While my Crest
Audio power amp blows these speaker hard ( JBL
L-100 ) Thank You. PS-order the large product
book