Steel Mesh 2-Piece Grill for 8" Speaker Black

Parts Express Steel Mesh 2-Piece Grill for 8" Speaker Black

Overview
Convenient and fast way to put grills on auto and PA equipment.
Part # 
260-424
Weight: 0.6 lbs.  
IN STOCK
Your Price
$5.90
Buy 10-49 $5.25
Buy 50-up$3.90
Part # 260-424
Qty:  EA
Available Payment Methods

Product Details

Parts Express Steel Mesh 2-Piece Grill for 8" Speaker Black
Convenient and fast way to put grills on auto and PA equipment. 2-piece construction allows you to mount ring and woofer with one set of screws and snap the grill over the entire assembly. Installed screws are not visible. Screws and speed clips included. Sold individually. Heavy duty expanded steel mesh design. Grill fits 8" speaker with a maximum outer diameter of 8-1/4". Overall diameter: 8-3/8".


Parts Express Steel Mesh 2-Piece Grill for 8" Speaker Black
  • BrandParts Express
  • Part Number260-424
  • UPC844632018046
  • Product CategorySteel Speaker Grills
  • Unit of MeasureEA
  • Product Rating
    (18 Reviews)
  • Weight0.6 lbs.
  • California Prop 65

    Warning: California residents only. Please note per Proposition 65 that this product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Similar Products

View similar products to the Parts Express Steel Mesh 2-Piece Grill for 8" Speaker Black
in the Steel Speaker Grills product category.

Reviews

Parts Express Steel Mesh 2-Piece Grill for 8" Speaker Black
Steel Mesh 2-Piece Grill for 8" Speaker Black is rated 4.3889 out of 5 by 18.
Rated 5 out of 5 by from perfect fit!I am replacing the 8" woofers in my mustang with shallow mount mb quart sub's they came without grills so I purchased 2,of these and they fit and look far better than my stock shaker grills ever did, and shipping and price could not have been better,thanks parts express!!!!!
Date published: 2014-06-13
Rated 5 out of 5 by from Perfict fitThese are very durable and easy to install. I would recommend them.
Date published: 2013-08-19
Rated 4 out of 5 by from Perfect option to finish off my projectWell, what can I say? It's a speaker grill. It does what it's supposed to. This one just happened to be the perfect match for the Goldwood midrange I used (see photo). Just the visual appeal I was going for.
Date published: 2012-09-04
Rated 4 out of 5 by from RobustNice solid grills. I would prefer the mounting flange to be designed to sit flush against the mounting surface of the panel, there is a bit of an air gap the way the stamping is shaped, but it's not a big deal.
Date published: 2012-03-26
Rated 5 out of 5 by from WoWFast Shipping!! --- I have old JBL spkr's, no grill cloth. Now I have Grand Kids. Young!! The grills fit great, and have fought off the Kids fantastically! I did have to modify the 8" mount abit to fit the 8" JBL's. The 6" grill fit great. Thanks!!!
Date published: 2011-09-08
Rated 5 out of 5 by from Dead on fit for Dayton DCS205-4Fits perfectly on a Dayton DCS205-4, not much else to say haha.
Date published: 2011-08-18

Product Q&A

Get your questions answered from other customers
who own this product or have experience with it.
If your question requires design or troubleshooting information,
please email tech@parts-expresss.com  for a prompt reply.
Parts Express Steel Mesh 2-Piece Grill for 8" Speaker Black

Any other measurements available? Distance between mounting holes? Inside diameter? Sure would help.

Asked by: bikenut1
The mounting holes are on a 7-5/8" diameter circle, maximum woofer diameter accepted is 8-1/4", the grill is 5/8" tall. Mounting holes are 3/16" in diameter.
Answered by: MattP
Date published: 2014-11-19

I take it I would have to mount it seperately from the Goldwood GW-208 8" Speakers?

Asked by: Summit
I'm not sure what you mean by "separately". The ring for this grill is designed to be mounted behind or in front of the woofer, possibly using the same screw holes if they line up properly. If they do not, you will have to drill new holes in the grill ring. Once the ring is mounted, the grill press-fits over the ring.
Answered by: MattP
Date published: 2014-10-14

Will this grill fit an Image Dynamics ID8? The outer diameter and grill height?

Asked by: daveeb
We do not have a cross reference for this type of thing. This grill will fit a woofer with a maximum frame diameter of 8-1/4" and is roughly 1/2" tall.
Answered by: MattP
Date published: 2014-09-11

would these grills cover the morel mw266?

Asked by: Baig
Unfortunately no, the woofer diameter is 8-3/4" and the maximum diameter the grill will accept is 8-1/4".
Answered by: MattP
Date published: 2014-08-27

will this fit the faital pro 8fe200?

Asked by: brettleasure
Yes this will fit that speaker.
Answered by: MattP
Date published: 2014-06-09

Can this mounting ring work with the Eminence Beta 8CX Driver? Which way do you mount it for a surface mounted driver?

Asked by: Paradigm
Does the mounting ring face up or down on top of the baffle?
Answered by: Paradigm
Date published: 2013-01-12

Customer Projects

Customer projects that include: Parts Express Steel Mesh 2-Piece Grill for 8" Speaker Black

If you built a project using this product, post it in the Parts Express Project Gallery.

Customer Discussions


If you would like to start a discussion about this product, post a thread in the TechTalk Customer Forum.
Get Deals
emailed to you every week.

Be the first to hear about new and exciting products,special pricing and incredible deals!

See This Week's "GET DEALS" Email
Parts Express
725 Pleasant Valley Dr.Springboro,OH45066USA
800-338-0531

© 1996-2014 Parts Express, All Rights Reserved

Host-Name:ZNODE1