SALE
Steel Mesh 2-Piece Grill for 15" Speaker Black

Manuals & Resources

Parts Express Steel Mesh 2-Piece Grill for 15" Speaker Black

Convenient and fast way to put grills on auto and PA equipment.
In Stock
Regular Price$13.90
You Save46%
Sale Price
$7.50
Part # 260-430
Share:

Product Details

Parts Express Steel Mesh 2-Piece Grill for 15" Speaker Black
Convenient and fast way to put grills on auto and PA equipment. 2-piece construction allows you to mount ring and woofer with one set of screws and snap the grill over the entire assembly. Installed screws are not visible. Screws and speed clips included. Sold individually. Heavy duty expanded steel mesh design. Grill fits 15" speaker with a maximum outer diameter of 15-1/4". Overall diameter: 15-3/8".


Parts Express Steel Mesh 2-Piece Grill for 15" Speaker Black
  • BrandParts Express
  • Part Number260-430
  • UPC844632018077
  • Product CategorySteel Speaker Grills
  • Unit of MeasureEA
  • Product Rating
    (6 Reviews)
  • Weight2.1 lbs.
  • California Prop 65

    Warning: California residents only. Please note per Proposition 65 that this product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

View similar products to the Parts Express Steel Mesh 2-Piece Grill for 15" Speaker Black
in the Steel Speaker Grills product category.

Reviews

Parts Express Steel Mesh 2-Piece Grill for 15" Speaker Black
Parts Express Steel Mesh 2-Piece Grill for 15" Speaker Black is rated 3.6667 out of 5 by 6.
Rated 2 out of 5 by from Hard to get undamaged unitsI bought 8 of these, and of the 8 I originally received, 8 had cosmetic damage--scratches, down to bare metal. PE replaced them, of course, but of the replacements, 2 were dented, and 5 had scratches again. It seems like the damage was probably caused by damage in shipment to PE. PE is sorting it out with their supplier. If you need to repair scratches, Rustoleum's satin black spray paint matches nicely; be sure to mask the center part with the perforated metal.Smaller sizes of these grills are very hard to remove; larger sizes, like the 15" will fit snugly but are relatively easy to remove.My recommendation of this product is based on your willingness to risk getting damaged units and touching up the paint. Be sure to sand to a smooth transition between paint and bare metal. At full price, I wouldn't recommend these unless you're sure to get perfect units; mine were 1/2 price on sale.
Date published: 2015-05-27
Rated 5 out of 5 by from Worked great!Bought these to replace my cat's scratching post that used to be the stock speaker cloth cover for my Fisher DC15's. Actually didn't need the ring, the grill fit snug enough over the 15" woofer and doesn't come off even with the heavy bass jazz music jamming out of them.
Date published: 2014-02-09
Rated 5 out of 5 by from Sleek Speaker Grill CoverHad to use 4 small pieces of speaker gasket tape. Stuck on the inside of the side of the grill. To hold the grill tightly in place on the ring when you slide it onto the ring. Otherwise, this grill is a heavy duty speaker grill for great speaker protection.
Date published: 2014-01-23
Rated 4 out of 5 by from Great after market productProduct should recommend choices for mounting screws. Ex: will you mount drivers inside or front mount? I had to purchase special mounting screws. That is no problem, but a mounting diagram choice sheet would have made the install easier.
Date published: 2010-01-25
Rated 2 out of 5 by from Not quite the right fitI tried installing these on a pair of Klipsch Fortes and the passive radiators on those are exactly 15", but these are just very slightly larger and it just wouldn't mount flush or mount well. Cheap construction... probably would have rattled around a lot anyway.Not recommended. Get the 15" heavy duty instead and mount it.
Date published: 2008-07-12
Rated 4 out of 5 by from Looks great once you get it onI got one of these for a 15" quattro sub I built for home theater (5.5 cu ft, 4" port 15" long). It looks great once it's fitted over the sub. However, you should note that you MIGHT need to do a bit of modifying to get it to fit, depending on the driver you chose. The back half of the grill that stays fastened to the enclosure didn't fit behind the 15" quattro. I ended up mounting the driver first, then flipping the mounting bracket for the grill around, drilled pilot holes through the driver's frame, and put in a few screws to hold the grill bracket in place. The other half of the grill fits on perfectly and looks wonderful!
Date published: 2008-01-25
  • 2015-09-04T07:11CST
  • bvseo_cps, prod_bvrr, vn_cps_3.1.6
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_6
  • loc_en_US, sid_260-430, PRD, sort_mostRecent
  • clientName_PartsExpressInternational

Product Q&A

Get your questions answered from other customers
who own this product or have experience with it.
If your question requires design or troubleshooting information,
please email tech@parts-expresss.com  for a prompt reply.
Parts Express Steel Mesh 2-Piece Grill for 15" Speaker Black

What is the ''bar style grills.'' Where?

Asked by: Bear Paws
You can see our selection of bar style grills below.http://www.parts-express.com/Search.aspx?keyword=bar%20grill&sitesearch=true
Answered by: MattP
Date published: 2015-08-27

Would one of these fit a Dayton RSS390HF 15" subwoofer? Thanks!

Asked by: swimmer33
Unfortunately no, the only grills we have that will allow clearance for the excursion on our subwoofers are the bar style grills.
Answered by: MattP
Date published: 2015-07-06

How deep is the ring?

Asked by: Salty
The ring itself is 3/8" deep.
Answered by: MattP
Date published: 2014-10-07

Hello, does the ring go between the wood and the driver or on top of the driver? Also are screws and speed clips actually included since in the next sentence it says "Sold individually"? Thanx.

Asked by: dirkmeister
The ring can be mounted either in front of or behind the driver frame, depending on the thickness of the frame itself. These do include screws and speed clips.
Answered by: MattP
Date published: 2015-02-24

Would this fit a Dayton UM15-22 Subwoofer? 

Asked by: Arthorfonzarelli
Unfortunately no, this will not fit that subwoofer. The only grill we have available that will clear the surround on those woofers will be our bar grills.
Answered by: MattP
Date published: 2014-06-19

are both pieces steel? guage? rise of surround?

Asked by: ChevelonTom
Both pieces of the grill are steel. It is a very robust grill, though we do not have the specific gauge of steel it is made from provided to us from the manufacturer. I am not clear on your last question, can you be more specific?
Answered by: Eric Chandler
Date published: 2014-06-03
  • 2015-09-04T07:49CST
  • bvseo_cps, prod_bvqa, vn_cps_3.1.6
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_7
  • loc_en_US, sid_260-430, PRD, sort_recentQuestionsFirst
  • clientName_PartsExpressInternational
Get Deals
emailed to you every week.

Be the first to hear about new and exciting products,special pricing and incredible deals!

See This Week's "GET DEALS" Email
Parts Express
725 Pleasant Valley Dr.Springboro,OH 45066USA
800-338-0531

© 1986-2015 Parts Express, All Rights Reserved

Host-Name:ZNODE1
Live Chat Software