260-261_ALT_1.jpg
260-261_ALT_1.jpg
 
260-261_ALT_0
 
260-261_ALT_1
 

Parts Express Speaker L-Pad Attenuator 100W Mono 3/8" Shaft 16 Ohm

Overview
L-pads adjust the relative volume of driver(s)/speaker(s) connected to them by placing added resistance in series. This L-pad is rated at 100 watts RMS, is designed to be used with 16 ohm loads, features a 3/8" shaft length, and comes with mounting hardware, faceplate, and knob.
Highlights
  • Add volume controls to any speaker
  • Great for speaker design tweaking
  • Maintains 16 ohm impedance
  • Mounting hardware included
Part # 
260-261
Weight: 0.708 lbs.  
IN STOCK
Your Price
$12.95
Buy 10-up$11.60
Part # 260-261
Qty:  EA
Available Payment Methods

Product Details

Parts Express Speaker L-Pad Attenuator 100W Mono 3/8" Shaft 16 Ohm

L-pads adjust the relative volume of driver(s)/speaker(s) connected to them by placing added resistance in series. At the same time, a counter-resistance is placed in parallel with the driver(s)/speaker(s) to maintain a constant impedance which allows the original crossover design to be used. L-pads are to be placed in between the amplifier and driver(s)/speaker, or in between the crossover and driver(s)/speaker(s). This particular L-pad is rated at 100 watts RMS, is designed to be used with 16 ohm loads, features a 3/8" shaft length, and comes with mounting hardware, faceplate, and volume control knob.

Dimensions: 2.5" diameter, 1-1/8" depth.

L-Pad Instruction Diagram

L Pad Instruction Diagram



Parts Express Speaker L-Pad Attenuator 100W Mono 3/8" Shaft 16 Ohm
  • BrandParts Express
  • Part Number260-261
  • UPC844632018480
  • Product CategorySpeaker L-pads
  • Unit of MeasureEA
  • Product Rating
    (1 Reviews)
  • Weight0.708 lbs.
  • California Prop 65

    Warning: California residents only. Please note per Proposition 65 that this product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Similar Products

View similar products to the Parts Express Speaker L-Pad Attenuator 100W Mono 3/8" Shaft 16 Ohm
in the Speaker L-pads product category.

Reviews

Parts Express Speaker L-Pad Attenuator 100W Mono 3/8" Shaft 16 Ohm
Speaker L-Pad Attenuator 100W Mono 3/8" Shaft 16 Ohm is rated 5.0 out of 5 by 1.
Rated 5 out of 5 by from Excellent quality L-pad with unexpected featuresI purchased two of these L-pads to replace worn, scratchy L-pads used as treble and midrange tone controls on a classic Electro-Voice Georgian corner horn monaural speaker system.The first thing I noticed upon unboxing these L-pads is the excellent feel and build quality. The second thing I noticed was that they come with an escutcheon and knob, however I chose not to use them in favor of 260-274 Dual L-Pad Face Plate Vertical.I did not expect the anti-rotation post, which engages with a matching hole in the escutcheon. Also, the shafts are grooved and the knobs fit snugly.Performance is outstanding - absolutely noiseless electrically. The adjustment occurs in small discrete increments due to the internal motion of the wiper over the windings. Infinite adjustment is not possible however in my application this was irrelevant.
Date published: 2012-02-06

Product Q&A

Get your questions answered from other customers
who own this product or have experience with it.
If your question requires design or troubleshooting information,
please email tech@parts-expresss.com  for a prompt reply.
Parts Express Speaker L-Pad Attenuator 100W Mono 3/8" Shaft 16 Ohm

We ordered part 260-261 3/8 16 ohm Lpad and inside the box was a 3/8 8ohm instead. If it is possible could our order on the 260-261 part please be opened and checked that it is the correct one inside the box? We order from you on a regular basis. Thanks!!

Asked by: Jeff1415
We apologize for this mix-up. Please contact our sales and customer service and they will take care of this for you, sales@parts-express.com or 800-338-0531 x2.
Answered by: MattP
Date published: 2014-12-11

Is this item available with the 1" shaft

Asked by: jaffy
No, this 16 ohm L-pad is only available with a 3/8" shaft.
Answered by: MattP
Date published: 2014-12-01

Could you please advise me as to whether this is a suitable replacement for a 14 ohm potentiometer in an Acoustic Research AR 2ax speaker crossover network? Is the potentiometer wire wound? Thanks...

Asked by: Neilbar
Yes this will work fine as a replacement for that. These are wire wound.
Answered by: MattP
Date published: 2014-01-30

Customer Projects

Customer projects that include: Parts Express Speaker L-Pad Attenuator 100W Mono 3/8" Shaft 16 Ohm

If you built a project using this product, post it in the Parts Express Project Gallery.

Customer Discussions


If you would like to start a discussion about this product, post a thread in the TechTalk Customer Forum.
Get Deals
emailed to you every week.

Be the first to hear about new and exciting products,special pricing and incredible deals!

See This Week's "GET DEALS" Email
Parts Express
725 Pleasant Valley Dr.Springboro,OH45066USA
800-338-0531

© 1996-2014 Parts Express, All Rights Reserved

Host-Name:ZNODE1
Live Chat Software