Parts Express Speaker Cabinet 1/2" Super Toe Spike Set 4 Pcs.

By rigidly coupling a loudspeaker enclosure to a floor by means of a spiking system, it is possible to dramatically improve clarity, stereo imaging and tighten up the bass response. This is particularly effective on flimsy flooring and thick carpet.
In Stock
List Price$9.99
You Save31%
Your Price
$6.90
Buy 4-49 $6.25
Buy 50+$5.25
Part # 240-730
Share:

Product Details

Parts Express Speaker Cabinet 1/2" Super Toe Spike Set 4 Pcs.

By rigidly coupling a loudspeaker enclosure to a floor by means of a spiking system, it is possible to dramatically improve clarity, stereo imaging and tighten up the bass response. This is particularly effective on flimsy flooring and thick carpet. Includes 4 toes, 4 threaded inserts and 4 jamnuts. Requires 1/2" hole and 10 mm allen wrench for installation.

Specifications: • Dimensions: • Spike: 3/4" L x 5/16" dia. • Thread on spike: 1-3/8" L x 3/8" dia. • Insert: 1" L x 1/2" dia.



Product Specifications
  • Construction MaterialSteel
  • Color / FinishBlack
Parts Express Speaker Cabinet 1/2" Super Toe Spike Set 4 Pcs.
  • BrandParts Express
  • Part Number240-730
  • UPC844632017544
  • Product CategorySpeaker Cabinet Spikes
  • Unit of MeasurePK
  • Product Rating
    (19 Reviews)
  • Weight0.3762 lbs.
  • California Prop 65

    Warning: California residents only. Please note per Proposition 65 that this product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

View similar products to the Parts Express Speaker Cabinet 1/2" Super Toe Spike Set 4 Pcs.
in the Speaker Cabinet Spikes product category.

Reviews

Parts Express Speaker Cabinet 1/2" Super Toe Spike Set 4 Pcs.
Parts Express Speaker Cabinet 1/2" Super Toe Spike Set 4 Pcs. is rated 3.7368 out of 5 by 19.
Rated 5 out of 5 by from well made and an easy fitI bought these for my old IMF transmission line speakers. Fitting them was very easy, with the correct drill bit and a BIG hex key! Do not screw the lock nuts till you have positioned the speakers for the correct stereo image . then level them and lock the spikes
Date published: 2015-01-09
Rated 3 out of 5 by from QA issuesIt is cheap enough that if they don't work, you don't get too upset. I bought a driver and an amp, so the shipping was free and i added this spike set on top of my purchase. It felt ok, but i could not screw the spike all the way into the insert nut. The spike, it seemed, was very slightly bent. I could thread the hex nut all the way in, but not into the insert nut. Strangely this was case with all 4 of them. I took them to the nearest hardware store, and i could thread a bolt into the insert nut without issues.Anyways, returning it would not really solve any issues as i'm not sure if the ones i'll get will be any better. I went ahead with the installation, and my subwoofer sits a little higher than i would've liked, but other than me, no one else seems to notice it.Like others have mentioned, i too had to go and buy a hex key for this.
Date published: 2013-09-01
Rated 2 out of 5 by from You get what you pay for...As mentioned in other reviews, the insert portion of the spikes is very fragile and I too had one come apart while screwing it into Baltic Birch. Unfortunately it was 90% inserted and it was difficult removing the damaged insert.I was finally able to figure out a way to do this quickly and without damaging the inserts.Use a proper metric hex wrench to start the insert into your project. Then, use the spike and locking nut, along with a ratchet and socket, to lock the nut against the insert and then screw the entire assembly into the project. Then, remove the spike as needed.This procedure worked very well for 12 inserts and after figuring this out I had no problems.The inserts are indeed poorly designed, but then again you aren't paying much for them.
Date published: 2013-04-24
Rated 5 out of 5 by from Why all the fuss?!?When I was trying to see how to install these, I read all the other reviews and got realy scared; but I screwed the cups in last night in 15 minutes! I did find a 10mm hex wrench to borrow, and did go in-and-out to keep the shavings from accumulating, but I did not have to use much force at all. I drilled 1/2 inch holes in 3/4 MDF and used a q-tip to liberally apply glue before tightenning them in for keeps, but I am very pleased with the install.
Date published: 2013-04-04
Rated 5 out of 5 by from Excellent productI bought these for my Sunfire Truwsubwoofer MkII. I saw another reviewer complaining about the install - perhaps it would help to include instructions of any kind on how to installe them. It is easy though: you drill a hole slightly smaller than the size of the socket, then use an allen wrench to screw it in. Works fine if you use the appropriate tool. Recommended - my sub is now tightly coupled to the floor.
Date published: 2011-10-30
Rated 3 out of 5 by from Good enough...The spikes themselves are great - sharp enough that I've torn my knuckle open at least once, and long enough to adjust the pitch of the speaker front to back to some degree.But the inserts, which are cheap, die-cast steel - cheap and die-cast always being a bad combination - are very poor quality. The thread pitch isn't quite the same as the spike itself, and there's no wrench flats, so you're left using channel-locks or similar pliers to turn them into place. (**Hint hint, PE! Wrench flats would be dynamite...**) Worse, though they take a 10mm allen wrench quite precisely, the flanges around the allen-wrench socket are far too thin, and the insert tends to snap at the points toward the end of installation. I managed to get one of eight installed properly before this happened; all the rest had to have the jagged edges of the allen-wrench flats torn off with pliers and filed smooth. This isn't a huge deal, maybe, but it would be nice to be able to install them as intended.
Date published: 2011-03-14
  • 2015-07-31T08:26CST
  • bvseo_cps, prod_bvrr, vn_cps_3.1.5
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_19
  • loc_en_US, sid_240-730, PRD, sort_mostRecent
  • clientName_PartsExpressInternational

Product Q&A

Get your questions answered from other customers
who own this product or have experience with it.
If your question requires design or troubleshooting information,
please email tech@parts-expresss.com  for a prompt reply.
Parts Express Speaker Cabinet 1/2" Super Toe Spike Set 4 Pcs.

I have jamo s426 hcs i need spike for front speaker will they works.

Asked by: Neaman Ahmed
We do not have a cross reference available for this type of thing. Please contact our tech support for more help with this question, tech@parts-express.com or 800-338-0531 x1.
Answered by: MattP
Date published: 2015-04-29

Given the chance that I may damage one of the threading nuts (out of the 12 I plan to install), where can I purchase a few replacements? Or better yet, what size are the nuts such that I might buy better quality replacements. Thanks...

Asked by: BACH
The thread diameter and spacing is 3/8"-16 TPI.
Answered by: MattP
Date published: 2014-10-03
  • 2015-07-31T09:41CST
  • bvseo_cps, prod_bvqa, vn_cps_3.1.5
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_2
  • loc_en_US, sid_240-730, PRD, sort_recentQuestionsFirst
  • clientName_PartsExpressInternational
Get Deals
emailed to you every week.

Be the first to hear about new and exciting products,special pricing and incredible deals!

See This Week's "GET DEALS" Email
Parts Express
725 Pleasant Valley Dr.Springboro,OH 45066USA
800-338-0531

© 1986-2015 Parts Express, All Rights Reserved

Host-Name:ZNODE1
Live Chat Software