Parts Express Project Box 3-1/4" x 2" x 1-3/8"
Parts Express Project Box 3-1/4" x 2" x 1-3/8" is rated out of 5 by 2.
Rated 1 out of 5
from Cluttered interiorMy project required space for three female jacks along one side of the project box but due to the cluttered interior, containing a second set of screw mounts and raised lines for inserting cards there was no clear space for drilling my three holes and I ended up drilling through one of the screw mounts, creating a hole the female jack could not screw down and in the process creating a crooked hole the female jack could not fill. Then I tried to cut a square hole in the top for a switch with a square base and that did not work at all. Completely ruined, I threw it away.
Date published: 2013-02-06
Rated 4 out of 5
by Leon - 08260
from Project boxBasic project box comes with extra hardware for mounting #320-450 (M16-02-112) Perf Board. However, the board is a very tight fit, and there are only two diagonal standoffs to support it. I don't know if my board was a bit oversize of if the box is small, but I had to "bulge" the sides to get the board to fit.
Date published: 2008-02-29