329-045_ALT_0.jpg
329-045_ALT_0.jpg
 
329-045_ALT_0
 

Parts Express Magnetic Grill Guides 0.395" Dia. x 0.2" H 8 Pcs.

Overview
These round magnets are perfect for attaching speaker grills to cabinets. The powerful neodymium design will securely hold even the largest grill frames.
Part # 
329-045
Weight: 0.08 lbs.  
IN STOCK
Your Price
$9.88
Part # 329-045
Qty:  PK
Available Payment Methods

Product Details

Parts Express Magnetic Grill Guides 0.395" Dia. x 0.2" H 8 Pcs.
These round magnets are perfect for attaching speaker grills to cabinets. The powerful neodymium design will securely hold even the largest grill frames. To use, simply drill a 13/32" diameter hole approximately 3/16" deep in your cabinet and grill frame, then glue the magnet into place using a suitable adhesive or epoxy while observing proper polarity. Magnet dimensions: 0.395" diameter x 0.2" thick. Eight magnets per package, enough to attach one grill.


Parts Express Magnetic Grill Guides 0.395" Dia. x 0.2" H 8 Pcs.
  • BrandParts Express
  • Part Number329-045
  • UPC844632040788
  • Product CategoryGrill Guides
  • Unit of MeasurePK
  • Product Rating
    (31 Reviews)
  • Weight0.08 lbs.
  • California Prop 65

    Warning: California residents only. Please note per Proposition 65 that this product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Similar Products

View similar products to the Parts Express Magnetic Grill Guides 0.395" Dia. x 0.2" H 8 Pcs.
in the Grill Guides product category.

Reviews

Parts Express Magnetic Grill Guides 0.395" Dia. x 0.2" H 8 Pcs.
Magnetic Grill Guides 0.395" Dia. x 0.2" H 8 Pcs. is rated 4.6452 out of 5 by 31.
Rated 3 out of 5 by from MagnetsWell what can one say there magnets I don't have them installed yet but don't see any problems.They got here in quick order.
Date published: 2014-11-28
Rated 5 out of 5 by from Powerful Little MagnetsThese magnets work just fine on my 2 way cabs! Had a heck of a time separating them from each other, they have a pretty good pull. Used a bit of epoxy in each drilled hole and magnets were held firmly in place.
Date published: 2014-10-23
Rated 5 out of 5 by from Stronger than I thought.I retro fitted my 84' Klipsch Cornwalls (3/4" Baltic Birch cabinets) with a set of homemade grills in the standard 17-black cloth they usually come with, only I wanted magnets instead of Velcro (the Velcro was wearing out). Mine were originally ordered with cane grills and they didn't fit out room d├ęcor but I couldn't bring myself to get rid of them.The web site says to use a drill bit size that is a bit small. I used a 25/64 bit with some Liquid Nails and tapped the magnets in with a rubber mallet. They held so tight I didn't even have to wait for the Liquid Nails to cure.
Date published: 2014-10-09
Rated 5 out of 5 by from Very Strong Magnets, with nice finish.You may not need magnets on both sides, they are strong enough when given good metal serface to stick to.I used wood screws in the cabinets and put the magnets in the speaker grills. Drill a small hole though both so they line up then drill out the holes for the magnets.
Date published: 2013-05-16
Rated 4 out of 5 by from Eight is enough for 2 light-duty grillsThese magnets are extremely powerful, strong enough that for many grills you can use one magnet per mounting point, along with a simple steel anchor plate. I used four of them for a grill I made out of 1/4-inch hardboard, gluing the magnets into the grill frame with Liquid Nails. On the speaker cabinet, I mounted 1/4-inch flat washers using #6 flathead screws, which gave me a relatively flat mating point for the magnets. They hold just fine.
Date published: 2012-02-23
Rated 5 out of 5 by from Very Nice!These were perfect for my application. I have 44" high speakers, and the grills are pretty heavy. These magnets are perfect. Strong, but not overly so. Some 5min epoxy was perfect to set them too. However, I can see these being too strong for bookshelf sized speakers. The magnets are VERY powerful.
Date published: 2011-07-22

Product Q&A

Get your questions answered from other customers
who own this product or have experience with it.
If your question requires design or troubleshooting information,
please email tech@parts-expresss.com  for a prompt reply.
Parts Express Magnetic Grill Guides 0.395" Dia. x 0.2" H 8 Pcs.

Customer Projects

Customer projects that include: Parts Express Magnetic Grill Guides 0.395" Dia. x 0.2" H 8 Pcs.

If you built a project using this product, post it in the Parts Express Project Gallery.

Customer Discussions


If you would like to start a discussion about this product, post a thread in the TechTalk Customer Forum.
Get Deals
emailed to you every week.

Be the first to hear about new and exciting products,special pricing and incredible deals!

See This Week's "GET DEALS" Email
Parts Express
725 Pleasant Valley Dr.Springboro,OH45066USA
800-338-0531

© 1996-2014 Parts Express, All Rights Reserved

Host-Name:ZNODE1
Live Chat Software