Gold Recessed 5-Way Banana Speaker Terminal Rectangle

Parts Express Gold Recessed 5-Way Banana Speaker Terminal Cup Rectangle

Overview
Rectangular recessed panel with gold plated posts and knurled knobs. Color coded. Accepts up to 8 gauge wire. Can also be used with dual banana plugs. Overall size: 3-5/8" by 3-1/8"; cutout: 2-7/8" x 2-1/8". Includes gasket.
Part # 
260-309
Weight: 0.1848 lbs.  
IN STOCK
List Price$7.49
You Save26%
Your Price
$5.50
Buy 10-49 $4.94
Buy 50-up$4.25
Part # 260-309
Qty:  EA
Available Payment Methods

Product Details

Parts Express Gold Recessed 5-Way Banana Speaker Terminal Cup Rectangle

Rectangular recessed panel with gold plated posts and knurled knobs. Color coded. Accepts up to 8 gauge wire. Can also be used with dual banana plugs.

Dimensions: • Overall size: 3-5/8" by 3-1/8"; cutout: 2-7/8" x 2-1/8" • Includes gasket.



Parts Express Gold Recessed 5-Way Banana Speaker Terminal Cup Rectangle
  • BrandParts Express
  • Part Number260-309
  • UPC844632017575
  • Product CategoryTerminal Plates & Cups
  • Unit of MeasureEA
  • Product Rating
    (45 Reviews)
  • Weight0.1848 lbs.
  • California Prop 65

    Warning: California residents only. Please note per Proposition 65 that this product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Similar Products

View similar products to the Parts Express Gold Recessed 5-Way Banana Speaker Terminal Cup Rectangle
in the Terminal Plates & Cups product category.

Reviews

Parts Express Gold Recessed 5-Way Banana Speaker Terminal Cup Rectangle
Gold Recessed 5-Way Banana Speaker Terminal Cup Rectangle is rated 4.5333 out of 5 by 45.
Rated 5 out of 5 by from Perfect Speaker connectionsPerfect for new speaker cabinets. Worked great in application.
Date published: 2014-12-10
Rated 5 out of 5 by from Just what I was looking for....I bought these to place in an empty cabinet I had bought on eBay. Fit perfectly, with no issues. Still waiting to figure out what to do for x-overs and tweeters, so I haven't fired them up yet. So far, though, I'm impressed.
Date published: 2014-09-09
Rated 5 out of 5 by from Good TerminalsUsed these terminals to replace cheapies bought from a national chain. The replacement was a direct fit. These are good terminals, the gold plating is nice, and it performs well. The surround could be more stiff, but with the gasket it works fine. Good purchase.
Date published: 2014-06-02
Rated 4 out of 5 by from Almost greatI've used these before. Am about to use them again today. I know they TELL you what the cutout should be. But how hard would it be to just add in a little slip of paper with the cutout already done, so you could just transfer that paper to your enclosure and trace the cutout.
Date published: 2014-04-19
Rated 5 out of 5 by from speaker binding postsNice quality for the money. Was easy to work with. I would buy again. The posts are five-way however I am using with banana plugs. The hole in the post can take very thick wire, my guess at least 8 gauge.
Date published: 2014-01-24
Rated 5 out of 5 by from Well built and good valueThese cups are heavier than others I've used over the years. Well built, easy to install and good value.Just wish black screws would have been included. (If they were, would have given 5 stars in all categories.
Date published: 2013-03-07

Product Q&A

Get your questions answered from other customers
who own this product or have experience with it.
If your question requires design or troubleshooting information,
please email tech@parts-expresss.com  for a prompt reply.
Parts Express Gold Recessed 5-Way Banana Speaker Terminal Cup Rectangle

What are the screw hole measurements for this terminal plate?

I am looking to replace my current speaker terminal plates which have broken, but mine measure out slightly differently than everything else I have been able to find.The plates which need replacing have an overall size (edge to edge) of 3 7/8" by 3 1/4" and cutout size of 3" by 2 3/8".As you can see, all these are only eighths of an inch off from your items, which is why I would like to confirm the size, based on screw hole if possible, to determine whether there is compatibility.Thanks!
Asked by: Joseph D.
Well Joseph, you are in luck. The PE item you are looking at, uses a cutout slightly larger than the one you are replacing. So, if you can't find the exact replacement---I suggest this item. A larger cutout does require a larger hole though--if the box is particle board, use a fine tooth saw and use the new plate as the "template". Exact replacements can be hard to fine--but this item is gold plated so the terminals should last years.
Answered by: Joe from San Francisco
Date published: 2013-08-22

Customer Projects

Customer projects that include: Parts Express Gold Recessed 5-Way Banana Speaker Terminal Cup Rectangle

If you built a project using this product, post it in the Parts Express Project Gallery.

Customer Discussions


If you would like to start a discussion about this product, post a thread in the TechTalk Customer Forum.
Get Deals
emailed to you every week.

Be the first to hear about new and exciting products,special pricing and incredible deals!

See This Week's "GET DEALS" Email
Parts Express
725 Pleasant Valley Dr.Springboro,OH45066USA
800-338-0531

© 1996-2014 Parts Express, All Rights Reserved

Host-Name:ZNODE1
Live Chat Software