Parts Express Gold Plated Binding Post Pair

These gold plated binding posts are made for the audiophile in mind. High quality gold plating make these binding posts ressistant to oxidation.
In Stock
Your Price
Buy 10-99 $5.80
Buy 100+$4.90
Part # 091-1150
  • Side entry wire/pin clamp
  • Color coded for easy identification
  • Threaded shaft diameter is .190"
  • 3/16" hole size

Product Details

Parts Express Gold Plated Binding Post Pair
Just one look at these select connectors and you will see the quality craftsmanship that went into their design. Ruggedly built and gold plated to with stand abuse and oxidation, these connectors are the perfect choice for home theater, home audio, and car stereo. Individually packaged. Sold in pairs.

Product Specifications
  • Style / TypeSingle
  • Contact PlatingGold
Parts Express Gold Plated Binding Post Pair
  • BrandParts Express
  • Part Number091-1150
  • UPC844632011610
  • Product CategoryBinding Posts
  • Unit of MeasurePR
  • Product Rating
    (14 Reviews)
  • Weight0.1188 lbs.
  • California Prop 65

    Warning: California residents only. Please note per Proposition 65 that this product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

View similar products to the Parts Express Gold Plated Binding Post Pair
in the Binding Posts product category.


Parts Express Gold Plated Binding Post Pair
Parts Express Gold Plated Binding Post Pair is rated 4.2667 out of 5 by 15.
Rated 5 out of 5 by from good people to deal with.two nuts wear missing from kit. i called to order new set and was wiling to pay. they would not take my money, and expressed new set in two days. dosen't get any better than that.
Date published: 2015-10-02
Rated 5 out of 5 by from Worked perfectlyI needed a terminal configuration without internal tabs or connectivity. Due to size constraints on a small box conversion I made, I mounted my crossover outside on the back of the box. So my electrical connections were all external with only wires to the drivers inside, sealed through a hole in the box. I installed these pins by removing the nuts, drilling 3/16" holes in the box and epoxying them in place at the threaded end. The connections from the amp and to the crossover are common through the clamped end of the pin. Banana plugs and pins are still useable. Nice form factor. PE price is right.
Date published: 2015-01-11
Rated 4 out of 5 by from A decent valueThere are no instructions that come with these so I was a little puzzled as to where to solder the wires to these. I just wrapped the wire around the posts at the end and soldered there. It seemed to work fine even if it doesn't look very elegant.As someone else stated, the plastic washers will melt in this process if you aren't careful. I solved this problem by keeping the nut loose until the soldering was done and the unit was cooled. Then I tightened it. Otherwise the nut melts into the washer.Once installed, they work fine and the speakers sound great.
Date published: 2012-03-30
Rated 5 out of 5 by from Excellent binding postThe post is excellent quality. The only problem does not come with solder eyelets to solder the wire. I recommend it.
Date published: 2009-10-02
Rated 3 out of 5 by from Not the best, yet very cost effectiveNot the best, yet very cost effectiveFor a low budget project, you can t go wrong as the post accepts an 8AWG wire, banana plug or a large spade. As others have stated, the weak link is the soft red and black plastic collars. While I did not solder onto the post, I can see why they might melt. I found the post could not be secured very tight as the these soft collars also easily distort under load. For my high end projects I will not use this post, yet for less critical applications you cannot really complain.
Date published: 2009-05-12
Rated 5 out of 5 by from WIll never use cheap junk again!!these binding posts just make working with them a pleasure. They have a rubber style isolation washer on each side that grip well. The fit and finish really dress up my amp!!
Date published: 2009-01-19
  • 2015-10-05T07:22CST
  • bvseo_cps, prod_bvrr, vn_cps_3.1.6
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_15
  • loc_en_US, sid_091-1150, PRD, sort_mostRecent
  • clientName_PartsExpressInternational

Product Q&A

Get your questions answered from other customers
who own this product or have experience with it.
If your question requires design or troubleshooting information,
please email  for a prompt reply.
Parts Express Gold Plated Binding Post Pair

What is the major diameter of the posts?  I have limited space to fit them in. 

Asked by: M2245
widest diameter is 11mm .43"
Answered by: TomI
Date published: 2015-04-09

I am upgrading a pair of KLH model 17's. I need a set of binding posts to go through the aluminum plate in the back and be insulated from the plate. Will these work? Its difficult to tell from the picture if the plastic piece at the base separates.

Asked by: JayMaq
Yes that insulator does separate for use on a metal chassis.
Answered by: MattP
Date published: 2015-02-18

What is the largest size bare wire that it will accept ?

Asked by: vair68robert
These will accept up to 8 AWG wire.
Answered by: MattP
Date published: 2014-06-16

What size hole is required to install these?

Asked by: Frederick
5.5mm works perfect.
Answered by: Bret191
Date published: 2012-06-26

I take it I'll need 2 sets for 1 amp or 16 for 8 amps

Asked by: tonemaster
You would need one set per speaker connection.
Answered by: mikevv
Date published: 2011-03-30
  • 2015-10-05T08:45CST
  • bvseo_cps, prod_bvqa, vn_cps_3.1.6
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_5
  • loc_en_US, sid_091-1150, PRD, sort_recentQuestionsFirst
  • clientName_PartsExpressInternational

Recently Viewed Products

Get Deals
emailed to you every week.

Be the first to hear about new and exciting products,special pricing and incredible deals!

See This Week's "GET DEALS" Email
Get Sales Flyer
Parts Express
725 Pleasant Valley Dr.Springboro,OH 45066USA

© 1986-2015 Parts Express, All Rights Reserved

Live Chat Software