The Easy IR Extender system from Parts Express makes distributed IR systems hassle-free by taking advantage of existing HDMI cables, and even distributed HDMI environments (with IR-capable HDMI matrices, splitters, and selectors), using the power and the wiring within the HDMI cable to operate.
This package contains an Easy IR Extender target, emitter, and two HDMI adapters. Simply connect an adapter at each end of the HDMI cable between the source/TV and the cable. At the TV location, plug the target into the jack on the side of the HDMI adapter. At the source location, plug the emitter into the jack on the side of the HDMI adapter.
Please note: A switch in the adapter allows you to dedicate the adapter for IR use or allows the adapter to pass HDMI CEC signals. CEC (Consumer Electronics Control) is part of the HDMI specification that allows CEC enabled devices to control each other. For example when you turn on a CEC enabled Bluray player an AV receiver and TV in the system will turn on and set to the correct inputs. At this time CEC is not widely implemented and is not commonly compatible between manufacturers. For this reason, we recommend setting the CEC/IR switch to IR; refer to your device user manual for more on CEC.
Parts Express Easy IR Extender Over HDMI Dual Band Bundle includes the following items:
|1||180-640||Easy IR Extender Dual Band Emitter|
|2||180-644||Easy IR Extender HDMI Adapter|
|1||180-642||Easy IR Extender Dual Band Target|
No substitutions allowed. The above may include some items that are not available for purchase separately.