Dual-Ended Gold Terminal Pair

Parts Express Dual-Ended Gold Binding Post Speaker Terminal Pair

Overview
Finally a solution for getting wires in and out of cabinet sub-enclosures! These dual-ended push terminals will eliminate the need for messy caulking or having to solder inside a cabinet.
Part # 
091-1154
Weight: 0.1 lbs.  
IN STOCK
List Price$10.99
You Save29%
Your Price
$7.80
Buy 4-99 $7.42
Buy 100-up$6.25
Part # 091-1154
Qty:  PR
Available Payment Methods

Product Details

Parts Express Dual-Ended Gold Binding Post Speaker Terminal Pair
Finally a solution for getting wires in and out of cabinet sub-enclosures! These dual-ended push terminals will eliminate the need for messy caulking or having to solder inside a cabinet. Simply drill two 5/32" holes in your 3/4" walls, tighten the two halves of the posts together, strip your wires, and connect. Can also be used for many other applications, including main input terminals for car audio enclosures. Accepts up to 8-gauge bare wire, sold in red/black color coded pairs.


Product Specifications
  • Style / TypeSingle
  • Contact PlatingGold
Parts Express Dual-Ended Gold Binding Post Speaker Terminal Pair
  • BrandParts Express
  • Part Number091-1154
  • UPC844632007835
  • Product CategoryBinding Posts & Plates
  • Unit of MeasurePR
  • Product Rating
    (11 Reviews)
  • Weight0.1 lbs.
  • California Prop 65

    Warning: California residents only. Please note per Proposition 65 that this product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

View similar products to the Parts Express Dual-Ended Gold Binding Post Speaker Terminal Pair
in the Binding Posts & Plates product category.

Reviews

Parts Express Dual-Ended Gold Binding Post Speaker Terminal Pair
Dual-Ended Gold Binding Post Speaker Terminal Pair is rated 4.4545 out of 5 by 11.
Rated 5 out of 5 by from Speaker Wire TerminalsI have used these in the past, and need some more for future projects.
Date published: 2014-12-04
Rated 5 out of 5 by from Great replacement for older JBL monitorsI ordered these terminals to replace the older and oxidized terminals on my JBL 4311 studio monitors. They're the same style, size, and shape, but accept much larger gauge wire. They're the perfect upgrade!
Date published: 2013-09-19
Rated 4 out of 5 by from 10 gauge maxI couldn't get cadence 8 gauge to fit without removing a LOT of copper strands. 10 gauge standard speaker cable is a tight squeeze. They were a bit smaller than I was expecting, tough to tell actual size from pic above. Plenty sturdy though and much easier (& cleaner) to install than what I've used in the past.
Date published: 2013-02-01
Rated 5 out of 5 by from made things easier !!!!built strong, easy to install, makes installing and uninstalling speakers a breeze, nice finish
Date published: 2012-07-10
Rated 4 out of 5 by from What you see is what you get.Good product. Fairly priced.
Date published: 2010-08-19
Rated 3 out of 5 by from Great For Zomax DriversThe stud on this terminal set is actually 4mm. The terminal part that screws off the stud can be used as a replacement terminal for Zomax horn drivers. As you may alredy know,Zomax horns are in several of todays PA speakers. This litle bit of knowledge could prove to make you look good in a day of need!
Date published: 2010-01-06

Product Q&A

Get your questions answered from other customers
who own this product or have experience with it.
If your question requires design or troubleshooting information,
please email tech@parts-expresss.com  for a prompt reply.
Parts Express Dual-Ended Gold Binding Post Speaker Terminal Pair

Sealed cabinets

Do these work with a sealed cabinet design? Was just wondering if the cabinet would remain air tight if I used these.
Asked by: Paul T
Yes these will work fine for a sealed design.
Answered by: MattP
Date published: 2013-06-25

Will these work as well as the more common binding posts that require soldering?

I'd like to avoid soldering for the sub I'm building and am wondering if these will be just as secure and work just as well.Thanks.
Asked by: dank
Yes these will work perfectly fine for that application.
Answered by: MattP
Date published: 2013-06-06

Will these work with 5/8" MDF

Anyone know if these will screw all the way down on 5/8" thick boards? Thanks in advance.
Asked by: audiofipro
Yes these will work with 5/8" material. The minimum thickness is 1/2" and the maximum is 3/4".
Answered by: MattP
Date published: 2013-01-14

Do these work with Banana plugs?

If not what would be the best connector to use?
Asked by: AngryShoe
These are only designed for use with bare wire. I would recommend part number 091-1245 for a nice binding post option.
Answered by: MattP
Date published: 2012-11-12

Customer Projects

Customer projects that include: Parts Express Dual-Ended Gold Binding Post Speaker Terminal Pair

If you built a project using this product, post it in the Parts Express Project Gallery.

Customer Discussions


If you would like to start a discussion about this product, post a thread in the TechTalk Customer Forum.
Get Deals
emailed to you every week.

Be the first to hear about new and exciting products,special pricing and incredible deals!

See This Week's "GET DEALS" Email
Parts Express
725 Pleasant Valley Dr.Springboro,OH45066USA
800-338-0531

© 1996-2014 Parts Express, All Rights Reserved

Host-Name:ZNODE1
Live Chat Software