090-475_ALT_1.jpg
090-475_ALT_1.jpg
 
090-475_ALT_0
 
090-475_ALT_1
 

Parts Express Dual Binding Post 1 Red 1 Black

Overview
Standard 0.75" dual binding posts made for chassis mounting. Will accommodate a standard dual banana plug, up to 16 gauge wire, and high current spade connectors stacked up to 5 mm high.
Part # 
090-475
Weight: 0.0594 lbs.  
IN STOCK
Your Price
$3.88
Buy 10-99 $3.09
Buy 100-up$2.71
Part # 090-475
Qty:  EA
Available Payment Methods

Product Details

Parts Express Dual Binding Post 1 Red 1 Black

Standard 0.75" dual binding posts made for chassis mounting. Will accommodate a standard dual banana plug, up to 16 gauge wire, and high current spade connectors stacked up to 5 mm high. Front and rear chassis insulators have a slight lip that keeps the conductors centered and from touching the chassis. This unit requires two 0.5" holes drilled 0.75" on center. Will work on chassis up to 0.25" thick. Unit comes with 2 nuts for rear ring or spade connection, or wires can be soldered directly to posts. High temperature high impact injection molded plastic.



Product Specifications
  • Style / TypeDual
  • Contact PlatingNickel
Parts Express Dual Binding Post 1 Red 1 Black
  • BrandParts Express
  • Part Number090-475
  • UPC844632010323
  • Product CategoryBinding Posts & Plates
  • Unit of MeasureEA
  • Product Rating
    (19 Reviews)
  • Weight0.0594 lbs.
  • California Prop 65

    Warning: California residents only. Please note per Proposition 65 that this product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Similar Products

View similar products to the Parts Express Dual Binding Post 1 Red 1 Black
in the Binding Posts & Plates product category.

Reviews

Parts Express Dual Binding Post 1 Red 1 Black
Dual Binding Post 1 Red 1 Black is rated 4.1579 out of 5 by 19.
Rated 4 out of 5 by from Upgraded vintage Heathkit AA-1640 Power AmpsNice, easy, inexpensive upgrade to vintage amps. Be careful not to torque them down too tight as they are delicate. Great way to modernize your vintage amplifiers for use with banana plugs.
Date published: 2013-10-26
Rated 5 out of 5 by from Banana jackexcellent deep snug fit with good insulators for mounting even on fairly thick surfaces
Date published: 2013-03-07
Rated 4 out of 5 by from Good for upgrades or new construction.Got these to upgrade the spring terminals on a pair of Minimus 7 speakers. Construction and materials are good for this price point and terminal spacing is good when using banana plugs.
Date published: 2012-12-13
Rated 5 out of 5 by from Great value for the price.I'm an amatuer, so I went inexpensive so I could practice. I stuck them on an old tube amp. Works great!
Date published: 2012-04-19
Rated 3 out of 5 by from Recommended with some reservationsThese are relatively cheap, they fit well, and do the job. However, they are NOT red and black like pictured in the photo. The red is actually a burgundy closer to purple.If your looking for a no frills binding post these will work fine.
Date published: 2012-02-17
Rated 5 out of 5 by from Works fer me !Decent quality. Seem to fit tight.Great value
Date published: 2010-01-27

Product Q&A

Get your questions answered from other customers
who own this product or have experience with it.
If your question requires design or troubleshooting information,
please email tech@parts-expresss.com  for a prompt reply.
Parts Express Dual Binding Post 1 Red 1 Black

will these take 25 amps at 12vdc if not do you have any that do?

Asked by: salemend

Hi, will these fit the Crown 300A 2 series (older) Thx

Asked by: Chetty
We do not have a cross reference available for this type of thing. Please contact our tech support for more help with this question, tech@parts-express.com or 800-338-0531 x1.
Answered by: MattP
Date published: 2014-10-07

What is the diameter of the rear post? I'm looking for a ring or spade connector that will fit it.

Asked by: jackie99
The threaded post diameter is 1/8" or 3.22mm.
Answered by: MattP
Date published: 2014-09-22

What is diameter of hole for bare wire connection?

Asked by: Nick Luther
The hole diameter in the side of the threaded post for bare wire hookup is 2.5mm or 0.1".
Answered by: MattP
Date published: 2012-10-12

Customer Projects

Customer projects that include: Parts Express Dual Binding Post 1 Red 1 Black

If you built a project using this product, post it in the Parts Express Project Gallery.

Customer Discussions


If you would like to start a discussion about this product, post a thread in the TechTalk Customer Forum.

Recently Viewed Products

Get Deals
emailed to you every week.

Be the first to hear about new and exciting products,special pricing and incredible deals!

See This Week's "GET DEALS" Email
Parts Express
725 Pleasant Valley Dr.Springboro,OH45066USA
800-338-0531

© 1996-2014 Parts Express, All Rights Reserved

Host-Name:ZNODE1