Caster Quick Change Plate For 3800 Series

Parts Express Caster Quick Change Plate For 3800 Series

Overview
Simply mount this quick-change plate to your equipment then slide and snap the swivel caster into place for easy transport. Or press the release tab and slide caster out for stationary use. For use with the 3800 series swivel casters only.
Part # 
262-095
Weight: 1 lbs.  
IN STOCK
Your Price
$4.18
Buy 10-up$3.93
Part # 262-095
Qty:  EA
Available Payment Methods

Product Details

Parts Express Caster Quick Change Plate For 3800 Series
Simply mount this quick-change plate to your equipment then slide and snap the swivel caster into place for easy transport. Or press the release tab and slide caster out for stationary use. For use with the 3800 series swivel casters only. 5/8" mounting height.


Product Specifications
  • Caster TypeMounting Plate
  • Color / FinishZinc
Parts Express Caster Quick Change Plate For 3800 Series
  • BrandParts Express
  • Part Number262-095
  • UPC844632038303
  • Product CategoryCasters
  • Unit of MeasureEA
  • Product Rating
    (4 Reviews)
  • Weight1 lbs.
  • California Prop 65

    Warning: California residents only. Please note per Proposition 65 that this product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Similar Products

View similar products to the Parts Express Caster Quick Change Plate For 3800 Series
in the Casters product category.

Reviews

Parts Express Caster Quick Change Plate For 3800 Series
Caster Quick Change Plate For 3800 Series is rated 4.75 out of 5 by 4.
Rated 5 out of 5 by from Great replacement for socket type removable casterTime will tell, but this appears to be a great alternative to the socket-type removable casters. I needed large wheels as my large speaker (15") cab gets wheeled on sidewalks and asphalt parking areas and the 2 1/2" OME wheels hang up on cracks, etc., and just get beat up. I have installed these plates with pairs of 4" swivel and locking swivel casters. I was concerned about the height affecting stability, but its just not an issue. I was able to remove the old caster sockets and use those screws to secure the plates and cover the old holes. Since these plates are thicker than the rubber bumper feet that were held by one screw that also held metal corner protector on the bottom of the cab, I opted to use that hole and screw to locate the outside corner of the new plate. This maximized the spread of the plates over the bottom of the cab and resulting stability. I did a "test run" with the cab over some bad sidewalk and got the result I wanted. Another option would have been to mount them on the side of cabinet if I was concerned about the plates contacting the floor. But I usually don't take them off unless I am stacking the cab on a sound isolation pad.
Date published: 2014-08-06
Rated 5 out of 5 by from Great productNice to have a quick change plate to take casters off when stacking cabinets.Top quality, industrial strength plate.Easy to use.I've used others that were harder to pop off the caster. This one works fine.
Date published: 2012-02-09
Rated 4 out of 5 by from Excellent product, but...I've had many times in the past where a rattling caster would drive me crazy, but not anymore! I pop them all off and pile them in a a milk crate. The only complaint about this item is I wish the bolt pattern was identical to the caster itself to better enable a retro-fit. All of my future designs will incorporate this item.
Date published: 2010-02-01
Rated 5 out of 5 by from Fantastic productThis product does not seem to be available in Australia. After a lot of searching and quite a few phone calls to wheel and caster companies in other states within Australia, nobody I talked to had heard of a caster that doesn't have to be screwed on or welded on. So with a bit of searching on the Internet I found Quick change caster plates( At the right size for my purpose) at Parts Express. Thankyou
Date published: 2009-06-19

Product Q&A

Get your questions answered from other customers
who own this product or have experience with it.
If your question requires design or troubleshooting information,
please email tech@parts-expresss.com  for a prompt reply.
Parts Express Caster Quick Change Plate For 3800 Series

This sounds like a great product, But, do you sell the 3800 series casters. I can't seem to find any reference to them. Obviously the product is useless without the correct casters.

Asked by: Caller4Dance
Yes we do offer the casters for this plate. The compatible part numbers are 262-080, 262-082, 262-085 and 262-087.
Answered by: MattP
Date published: 2014-07-18

Customer Projects

Customer projects that include: Parts Express Caster Quick Change Plate For 3800 Series

If you built a project using this product, post it in the Parts Express Project Gallery.

Customer Discussions


If you would like to start a discussion about this product, post a thread in the TechTalk Customer Forum.
Get Deals
emailed to you every week.

Be the first to hear about new and exciting products,special pricing and incredible deals!

See This Week's "GET DEALS" Email
Parts Express
725 Pleasant Valley Dr.Springboro,OH45066USA
800-338-0531

© 1996-2014 Parts Express, All Rights Reserved

Host-Name:ZNODE1
Live Chat Software