Get your questions answered from other customers
who own this product or have experience with it.
If your question requires design or troubleshooting information,
please email email@example.com
for a prompt reply.
Parts Express Cast Frame #10-32 Speaker Mounting Kit
Just curious what size hole to drill for these.
These require a 1/4" hole for mounting.
Date published: 2014-10-24
Will this be suitable for speakers, part number 264-918?
Tang Band claims the mounting hole diameter is 5mm, the diameter of the #10 screw is ~4.8mm so it will be close but these should work without a problem.
Date published: 2014-10-20
minimum baffle thickness?
going to use 1/2 inch mdf mounting 8 inch dvc woofer (below) are these too long/big for that?
The length of the unthreaded shaft is 1/4" so these will work fine for your application.
Date published: 2013-04-01
What 's the diameter of a "10"?
Is a 10 larger than 1/4"?(I'm looking for a hex head to fit the 5.5mm holes specified by Dayton for the RSS315HF-4).(Interesting that the HO version of this driver specifies 6.5mm holes.)Thanks!
A #10 is smaller than a 1/4"screw. In terms of dimensions, the head diameter of these is just under 8 mm, while the shaft diameter is about 4.5 mm. On a baffle, I often drill holes larger than 4.5 mm. Then I use a 6 mm (inner diameter) washer that allows for play in the larger hole, while still covering it.
Date published: 2011-11-10