Manuals & Resources

Parts Express Audiophile Locking RCA Connector 2 Pair

Audiophile connectors feature the same high performance features found in exotic connectors at a price that you can afford. Four connectors included.
In Stock
List Price$28.99
You Save31%
Your Price
Buy 10-49 $17.50
Buy 50+$14.62
Part # 091-1065
  • 24k gold plated construction
  • Split center pin for maximum contact
  • Set-screw cable strain relief
  • 8.3 mm cable entry

Product Details

Parts Express Audiophile Locking RCA Connector 2 Pair

Audiophiles demand connectors that perform as well as they look, but that doesn't mean the connector should be priced out of reach for the everyday audio enthusiast. Audiophile connectors feature the same high performance features found in exotic connectors at a price that you can afford. After assembly simply slip the connector onto the RCA jack and tighten the shell to hold the connector securely. Four connectors included.

Features and Specifications: • 24k gold plated construction • Solder-type center contact • Split center pin for maximum contact • Polished platinum barrel • Set-screw cable strain relief • 8.3 mm cable entry • Contact plating: gold • Shell material: brass • Finish: black chrome • Sold per: 2 pairs • Entry hole: 8.3 mm • Termination style: solder.

Product Specifications
  • GenderMale / Plug
  • Mounting TypeCable Mount
Parts Express Audiophile Locking RCA Connector 2 Pair
  • BrandParts Express
  • Part Number091-1065
  • UPC844632064982
  • Product CategoryRCA Connectors
  • Unit of MeasureEA
  • Product Rating
    (15 Reviews)
  • Weight0.3 lbs.
  • California Prop 65

    Warning: California residents only. Please note per Proposition 65 that this product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

View similar products to the Parts Express Audiophile Locking RCA Connector 2 Pair
in the RCA Connectors product category.


Parts Express Audiophile Locking RCA Connector 2 Pair
Parts Express Audiophile Locking RCA Connector 2 Pair is rated 4.4 out of 5 by 15.
Rated 5 out of 5 by from I continue to enjoy these adjustable RCA'sSure go get WTB's their fantastic as well but in the final analysis do they get me closer to the music in an affordable manner? The answer is yes, sure I want all Nordost but get real ......haven't won the Lotto yet !
Date published: 2014-09-19
Rated 5 out of 5 by from Very nice productUsed cardas silver solder and DH Labs silver sonic cable caig rosin flux. Soldered easy. Sounds great. Deep bass shimmering highs. Sounds on same level as my much more expensive cable. I don't get the negative reviews on this product. Looks and feels allot like my WBT connecters Highly reccommended.
Date published: 2014-08-04
Rated 5 out of 5 by from Worth more than the price!I realize these are not the cheapest RCA terminations on the market, but you know the old saying, you get what you pay for? Well, that is definitely not true in this instance, you get MORE than what you paid for. I know everyone oohs and ahhs about some of the other, more expensive connectors. They work great, have a VERY tight connection (but not hard to get on and off when needed).
Date published: 2014-03-06
Rated 4 out of 5 by from Good connectors, but some quality control issues (and no instructions)In general, these are solid connectors. However, one of my connectors (in a pack of four) had the problem another reviewer noted - namely, the threads on the outer shell are slightly "off" making it extremely hard to tighten (it feels stuck in several different parts of the rotation). And to respond to another reviewer, this problem existed before any soldering was done (there was no "solder bump" causing this issue).It's also frustrating that these connectors do not come with any instructions. I've used really inexpensive Rean connectors that provide specific instructions on the length of cable to strip, the length of outer insulation to strip, etc. You get nothing with these and there's nothing on Dayton's website either. I also think that I ended up soldering these incorrectly - I soldered the ground wire to the brass body of the connector below the cup for the center pin. As another reviewer noted, this is extremely difficult, because the body acts as a giant heatsink - I ended up melting the insulation from the wires and the techflex that was touching the edge of the shell started to melt as well. From reading the reviews on this site, I now think I should have soldered the ground wires to the two prongs (tangs?) at the top rear of the connector. Would be helpful if Dayton provided some guidance.I've ordered some more of these and will try soldering them as noted above and report back.
Date published: 2013-01-17
Rated 5 out of 5 by from Great connectorsVery easy to assemble, had no problems soldering Belden 1694a to the connectors.The connectors are bulky. When connected to the rca's on my pre amp they touch.Love the split pin and locking mechanism.There is a definite sound improvement over the older connectors.More detail and the voices sound more natural.
Date published: 2012-11-24
Rated 5 out of 5 by from Super quality for the priceThees are basically WBT clones that cost about 70.00 EACH. Solder up real good if connector AND cable fluxed well. The only downside is body diameter. In close quarters super tight fit and cases rub when turning sleeves to lock. That is my ONLY complaint. Really nice connectors for making your own cables room provided.
Date published: 2012-09-24
  • 2015-09-01T07:29CST
  • bvseo_cps, prod_bvrr, vn_cps_3.1.6
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_15
  • loc_en_US, sid_091-1065, PRD, sort_mostRecent
  • clientName_PartsExpressInternational

Product Q&A

Get your questions answered from other customers
who own this product or have experience with it.
If your question requires design or troubleshooting information,
please email tech@parts-expresss.com  for a prompt reply.
Parts Express Audiophile Locking RCA Connector 2 Pair

What is the max diameter of the outer shell?  I have an IFi idsd DAC and it looks like the RCA's are a bit close together.

Asked by: captainwho
The max diameter is 8.3mm.
Answered by: MattW
Date published: 2015-04-08

What is the overall length of this RCA?

Asked by: eouble
The overall length is approximately 2-1/16" (52.4mm).
Answered by: RussR
Date published: 2014-03-31
  • 2015-09-01T08:49CST
  • bvseo_cps, prod_bvqa, vn_cps_3.1.6
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_2
  • loc_en_US, sid_091-1065, PRD, sort_recentQuestionsFirst
  • clientName_PartsExpressInternational
Get Deals
emailed to you every week.

Be the first to hear about new and exciting products,special pricing and incredible deals!

See This Week's "GET DEALS" Email
Parts Express
725 Pleasant Valley Dr.Springboro,OH 45066USA

© 1986-2015 Parts Express, All Rights Reserved

Live Chat Software