free shipping at parts express

Parts Express 6 Pin Mini DIN Plug

Brand:|Part # 090-620
6 pin mini, male DIN connector. Sold individually.
In Stock
Your Price
Buy 10-99 $1.28
Buy 100+$0.98
Part # 090-620

Product Details

Parts Express 6 Pin Mini DIN Plug
6 pin mini, male DIN connector. Sold individually.

Product Specifications
  • GenderMale / Plug
  • Mounting TypeCable Mount
  • Conductors6-Pin
Parts Express 6 Pin Mini DIN Plug
  • BrandParts Express
  • Part Number090-620
  • UPC038975141060
  • Product CategoryDIN & Mini DIN Connectors
  • Unit of MeasureEA
  • Product Rating
    (14 Reviews)
  • Weight0.0013 lbs.
  • California Prop 65

    Warning: California residents only. Please note per Proposition 65 that this product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

View similar products to the Parts Express 6 Pin Mini DIN Plug
in the DIN & Mini DIN Connectors product category.


Parts Express 6 Pin Mini DIN Plug
Parts Express 6 Pin Mini DIN Plug is rated 4.2857 out of 5 by 14.
Rated 3 out of 5 by from Well, the price is right, so order some extras.How can you go wrong with a connector? I'll give you three ways:1) A couple of connectors in the batch I ordered had straight pins on the cable side instead of solder cups like the rest of them. You can solder a wire to the side of such pins, but it requires some finesse.2) Speaking of finesse, if you have an adjustable iron, use very low heat to solder these, and don't apply it any longer than to get the job done. The slightest bit of excessive heat causes the plastic body that holds the pins to melt, and you'll end up pushing the pins out of position and generally create a mess. Apparently the idea that someone might solder to the pins eluded the designers.3) The outer shell slides over the finished assembly. While it seems intuitive (and is possible) to slide it until the shell and inner plastic bits are flush, leaving just the silver barrel exposed, don't do this. Many pieces of equipment have the female connector recessed enough that the shell will keep the pins from inserting fully into the socket. Don't push the shell all the way forward, but leave 1/4" of the inner plastic shell exposed. See the product photo for how the finished connector should look.The finished product is fine if you avoid the "gotchas". It is well shielded and the clamp design is nice. Just order a couple extras to learn on.
Date published: 2015-07-27
Rated 3 out of 5 by from Decent.I bought this to replace my failing din plug on Klipsch Promedia 2.1's. I have to admit, it has been a while since i soldered a din plug. I have soldered/replaced several din plugs on ham radio's over the years and i remembered now how bad they are to solder since the pins tend to move because the plastic melts from the heat. This is not a problem with Parts Express this is just the nature of the product. There are better quality din plugs out there but they are hard to find.
Date published: 2015-05-11
Rated 5 out of 5 by from "APART FROM THE REST!"In a fluke accident I broke my DIN pin on a KLIPSCH subwoofer! I was bummed out...found a link and referral for PARTS EXPRESS via google and thought I'd give it a shot. Parts arrived on time packaging was fine. I have novice to intermediate solder skills. The pin itself was reliable, well made, no rough edges or burrs. It actually came apart into 3 pieces, which made soldering and installation much more accurate and easy!In summary, I LOVE PARTS EXPRESS!!!
Date published: 2014-03-07
Rated 5 out of 5 by from First time using a 6-Pin DINThis is the first time I've every tried to build my own cable, so it was a little tricky to figure out how to first open it and then solder the connectors. The reverse side of the connector, I discovered, has hollow tubes to allow you to insert the lead and let the solder fill the rest of the space. As far as I can tell, it's a good product.
Date published: 2014-03-03
Rated 5 out of 5 by from 6 pin mini dinUsed this to repair a Pro Media Speaker System by Klipsch and this is a very inexpensive repair. As the pin description it is small so you really need to know how to solder in small places. Product was just as described and speakers work like new.
Date published: 2013-02-07
Rated 4 out of 5 by from Very SatisfiedThis product was easy to assemble and use. The pins do not take much heat so caution should be used when soldering.
Date published: 2010-03-24
  • 2016-02-06T07:32CST
  • bvseo_cps, prod_bvrr, vn_cps_3.1.6
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_14
  • loc_en_US, sid_090-620, PRD, sort_mostRecent
  • clientName_PartsExpressInternational

Product Q&A

Get your questions answered from other customers
who own this product or have experience with it.
If your question requires design or troubleshooting information,
please email  for a prompt reply.
Parts Express 6 Pin Mini DIN Plug

How do I attach the 6 small wires from 6 Pin Mini DIN Plug to the hard wire coming out of the speaker back? Is this the soldering I see talked about in these answers? Can they be rat tailed? First time I have had this problem as the old Plug broke off.

Asked by: RTHNovice
This connector would require a solder connection to the wire.
Answered by: GregT
Date published: 2016-02-04

will this 6 pin connector work on my klipsch Promedia 2.1

Asked by: herb101
We do not have a cross reference available for this type of thing. Please contact our tech support for more help with this question, or 800-338-0531 x1.
Answered by: MattP
Date published: 2015-06-17

will this connect to an i pod dock?

Asked by: chriskoenig
Impossible to say without knowing the type of plug on the dock unfortunately. If it uses a standard 6 pin mini DIN connector this should fit.
Answered by: MattP
Date published: 2015-02-18

How to get a wiring diagram to fix a plug.

Where do I get a 6 pin mini din plug wiring diagram so that I can match the wires to the pin? This is for a klipsch speaker system for my computer.
Asked by: Fun Frank
If you search (Google, etc) "6-pin mini DIN diagram" you will receive dozens of useful references on this and related DIN connectors.With that overview in mind, then go to : where you will find the wiring diagram specific to Klipsch speakers.
Answered by: FlyBoy
Date published: 2012-03-26

what type of solder do you use on these, solder paste?

novice at soldering, any advice is appreciated, but I want to fix these (2sets) promedias.
Asked by: RGWag
Just about any solder you're comfortable with should do the job. Given the application, a small diameter solder may be advisable, I've referenced one below for your convenience.
Answered by: RussR
Date published: 2011-07-08
  • 2016-02-06T08:57CST
  • bvseo_cps, prod_bvqa, vn_cps_3.1.6
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_5
  • loc_en_US, sid_090-620, PRD, sort_recentQuestionsFirst
  • clientName_PartsExpressInternational

Recently Viewed Products

Parts Express FacebookParts Express TwitterParts Express YouTubeParts Express PinterestParts Express SpotifyParts Express Instagram
Live Chat Software