NTE SW01-5 No-Clean Wick #3 Green 0.075" x 5 ft.

NTE SW01-5 No-Clean Wick #3 Green 0.075" x 5 ft.

Brand:|
Overview
NTE Solder Wick is made from fine copper wire woven together with a no-clean flux formula added to it to increase absorption.
Part # 
341-550
Weight: 0.05 lbs.  
IN STOCK
Your Price
$2.88
Buy 4-up$2.74
Part # 341-550
Qty:  EA
Available Payment Methods

Product Details

NTE SW01-5 No-Clean Wick #3 Green 0.075" x 5 ft.
NTE Solder Wick is made from fine copper wire woven together with a no-clean flux formula added to it to increase absorption. Removes up to four times more solder than conventional wick, and extracts solder much faster than wicks based on Type-R fluxes. Residue left behind is halide free and non-conductive, so it does not have to be cleaned off the board. 100% copper wick has fine braid design to promote strong capillary action to pull in excess solder.


NTE SW01-5 No-Clean Wick #3 Green 0.075" x 5 ft.
  • BrandNTE
  • Part Number341-550
  • UPC768249099482
  • Product CategoryDesoldering Wick
  • Unit of MeasureEA
  • Product Rating
    (4 Reviews)
  • Weight0.05 lbs.
  • California Prop 65

    Warning: California residents only. Please note per Proposition 65 that this product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Similar Products

View similar products to the NTE SW01-5 No-Clean Wick #3 Green 0.075" x 5 ft.
in the Desoldering Wick product category.

Reviews

NTE SW01-5 No-Clean Wick #3 Green 0.075" x 5 ft.
NTE SW01-5 No-Clean Wick #3 Green 0.075" x 5 ft. is rated 5.0 out of 5 by 4.
Rated 5 out of 5 by from Does the Job!Had never tried this before but it works amazingly well. Will be buying more in the future.
Date published: 2014-10-15
Rated 5 out of 5 by from Good Stuff!I've used solder braid for a while now, but this product is great.This braid actually removes the solder from the joint and leaves a clean surface to re-solder to.
Date published: 2013-10-30
Rated 5 out of 5 by from Does exactly as intendedI have used a good bit of wicking before, as an electronics tech. This is very good at what it is intended for. If you are pulling large quantities of solder off a board, you will want larger wicking or a solder sucker. However, for anything smaller, or to clean up after the solder sucker has been used, this is very good.
Date published: 2013-01-04
Rated 5 out of 5 by from works as it shouldI dont know what the differences in color (green) specifies about the braid, but it works well. seems to be more absorbant than the radioshack stuff i ran out of. 5ft will be more than enough to last me quite awhile.
Date published: 2011-08-26

Product Q&A

Get your questions answered from other customers
who own this product or have experience with it.
If your question requires design or troubleshooting information,
please email tech@parts-expresss.com  for a prompt reply.
NTE SW01-5 No-Clean Wick #3 Green 0.075" x 5 ft.

Customer Projects

Customer projects that include: NTE SW01-5 No-Clean Wick #3 Green 0.075" x 5 ft.

If you built a project using this product, post it in the Parts Express Project Gallery.

Customer Discussions


If you would like to start a discussion about this product, post a thread in the TechTalk Customer Forum.
Get Deals
emailed to you every week.

Be the first to hear about new and exciting products,special pricing and incredible deals!

See This Week's "GET DEALS" Email
Parts Express
725 Pleasant Valley Dr.Springboro,OH45066USA
800-338-0531

© 1996-2014 Parts Express, All Rights Reserved

Host-Name:ZNODE1