free shipping at parts express

NTE 54-667 DPDT Slide Switch 7mm Actuator Height

Brand:|Model: 54-667|Part # 060-908
Classic look, classic function! This switch is an exact replacement for switches in many pieces of vintage audio equipment and instruments, as well as electrical devices from the 1950's to the present day.
In Stock
Your Price
Buy 4+$1.54
Part # 060-908
  • Exact replacement selector switches for Dynaco PAS and other tube equipment
  • Replaces Fender Jazzmaster and Jaguar rhythm circuit switch
  • Threaded screw holes in tabs for easy mounting

Frequently Bought Together

Product Details

NTE 54-667 DPDT Slide Switch 7mm Actuator Height

Specifications: • Current rating: 0.5A 125V, 3A 250 VAC, 6A 125 VAC • Insulation resistance: 150 megohms (minimum) • Dielectric strength: 1500V (minimum) • Temperature resistance: +221°F (+105°C) • Temperature rating: +32° to 185°F (+0° to +85°C) • Electrical life: 6,000 cycles • Mechanical life: 6,000 cycles • Terminal type: Solder lug • Dimensions: 1.38" L x 0.55" W x 0.91" H.

Product Specifications
  • CircuitDPDT
  • Contact Rating @ Voltage6A 125 VAC
  • IlluminationNon-Illuminated
NTE 54-667 DPDT Slide Switch 7mm Actuator Height
  • BrandNTE
  • Model54-667
  • Part Number060-908
  • UPC768249292142
  • Product CategorySlide Switches
  • Unit of MeasureEA
  • Weight0.1 lbs.
  • California Prop 65

    Warning: California residents only. Please note per Proposition 65 that this product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Similar Products

View similar products to the NTE 54-667 DPDT Slide Switch 7mm Actuator Height
in the Slide Switches product category.


NTE 54-667 DPDT Slide Switch 7mm Actuator Height

Product Q&A

Get your questions answered from other customers
who own this product or have experience with it.
If your question requires design or troubleshooting information,
please email  for a prompt reply.
NTE 54-667 DPDT Slide Switch 7mm Actuator Height

Is this switch "off" in a center position?

Asked by: MC120
Unfortunately no, this switch is ON/OFF only.
Answered by: MattP
Date published: 2014-08-19

what is the mounting screw spacing, i don't understand the "(14 x 7 mm)"

i need the space between mounting holes, as well as hole diameter thanks
Asked by: pipolhausen
A technical drawing with screw hole spacing can be found in the datasheet that is on the product page.
Answered by: MattP
Date published: 2013-09-27

Will this turn on and off a 14.4 volt battery that puts out 1500 mah.

I was told by the hobby shop where I got battery, that a switch would need a 30 amp rating.
Asked by: ron533
Unfortunately I would not recommend this for anything that requires a 30A rating.
Answered by: MattP
Date published: 2013-08-26
  • 2016-02-12T07:14CST
  • bvseo_cps, prod_bvqa, vn_cps_3.1.6
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_3
  • loc_en_US, sid_060-908, PRD, sort_recentQuestionsFirst
  • clientName_PartsExpressInternational

Recently Viewed Products

Parts Express FacebookParts Express TwitterParts Express YouTubeParts Express PinterestParts Express SpotifyParts Express Instagram
Live Chat Software