360-022_ALT_1.jpg
360-022_ALT_1.jpg
 
360-022_ALT_0
 
360-022_ALT_1
 

Nickel Plated Nibbling Tool

Overview
Nickel plated tool cuts up to 18 gauge non-hardened metals and plastics. Ideal for making square holes for fuse holders, switches, indicator lamps, etc. 7" in length. Net weight: 1/2 lb.
Part # 
360-022
Weight: 0.445 lbs.  
IN STOCK
Your Price
$9.75
Buy 6-up$8.80
Part # 360-022
Qty:  EA
Available Payment Methods

Product Details

Nickel Plated Nibbling Tool
Nickel plated tool cuts up to 18 gauge non-hardened metals and plastics. Ideal for making square holes for fuse holders, switches, indicator lamps, etc. 7" in length. Net weight: 1/2 lb.


Nickel Plated Nibbling Tool
  • BrandParts Express
  • Part Number360-022
  • UPC844632013348
  • Product CategoryWire Cutters
  • Unit of MeasureEA
  • Product Rating
    (7 Reviews)
  • Weight0.445 lbs.
  • California Prop 65

    Warning: California residents only. Please note per Proposition 65 that this product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Similar Products

View similar products to the Nickel Plated Nibbling Tool
in the Wire Cutters product category.

Reviews

Nickel Plated Nibbling Tool
Nickel Plated Nibbling Tool is rated 4.0 out of 5 by 7.
Rated 4 out of 5 by from Does the jobIt's a cheap nibbler that does its job. Cuts thin materials very easily, but thicker materials require a lot more force. I recommend using gloves to get a better grip.
Date published: 2012-01-07
Rated 5 out of 5 by from Best Tool for Detailed Sheet Metal WorkI have used this tool over, and over. I have yet to find a nibbler that compares to this one. This nibbler seems to fit into more places than any other. A toolbox-must-have!!
Date published: 2011-09-29
Rated 4 out of 5 by from Good for Light WorkI bought this tool to 'nibble' a square hole in a metal chassis. The metal on the chassis was probably 16-gauge (or maybe thicker), and the handle on the tool failed before I finished the job. What it did do, it did well. The tool is rated to 18-gauge, so I wasn't upset by the failure. However, at the price it is offered I should have bought two and could have finished the job after the first one failed (I was over half way done). This would have still be cheaper than buying another similar tool for $25 that might have failed like this one did. I plan to buy two more to keep in my tool chest.
Date published: 2010-03-25
Rated 4 out of 5 by from Useful toolDoes what it is supposed to but my project box was made of sterner stuff than this tool can handle. Took so much force that I was afraid to break the tool. Maybe will do better on slightly thinner softer material.
Date published: 2010-01-20
Rated 4 out of 5 by from Cheapest nibling tool I ever saw!Face it, you need one! The minute you try to fit that power cord socket or that nice rectangular switch on your chassis you'll wish you had bought this... Not a fancy tool but more than adequate for the job and at the cheapest price I've ever seen!!!
Date published: 2009-03-16
Rated 4 out of 5 by from it's a nibblerNo it will not chew through an I-beam, but it will notch out equipment facures and PC cases. Hey, it's under 10 bucks and works for a helluva long time.
Date published: 2009-02-13

Product Q&A

Get your questions answered from other customers
who own this product or have experience with it.
If your question requires design or troubleshooting information,
please email tech@parts-expresss.com  for a prompt reply.
Nickel Plated Nibbling Tool

Customer Projects

Customer projects that include: Nickel Plated Nibbling Tool

If you built a project using this product, post it in the Parts Express Project Gallery.

Customer Discussions


If you would like to start a discussion about this product, post a thread in the TechTalk Customer Forum.

Recently Viewed Products

Get Deals
emailed to you every week.

Be the first to hear about new and exciting products,special pricing and incredible deals!

See This Week's "GET DEALS" Email
Parts Express
725 Pleasant Valley Dr.Springboro,OH45066USA
800-338-0531

© 1996-2014 Parts Express, All Rights Reserved

Host-Name:ZNODE1