090-970_ALT_0.jpg
090-970_ALT_0.jpg
 
090-970_ALT_0
 

Neutrik NMJ2HC-S 1/4" Mono Phone Jack Unswitched

Brand:| Model: NMJ2HC-S
Overview
1/4" mono jack, unswitched, with chrome ferrule and standard solder lugs. Mounting nut included.
Highlights
  • Wide body and extremely durable contacts
  • Mates with all mono A-gauge plugs acc. EIA RS-453 standard
Part # 
090-970
Weight: 0.0264 lbs.  
IN STOCK
Your Price
$1.19
Buy 10-99 $1.09
Buy 100-up$0.98
Part # 090-970
Qty:  EA
Available Payment Methods

Product Details

Neutrik NMJ2HC-S 1/4" Mono Phone Jack Unswitched
1/4" mono jack, unswitched, with chrome ferrule and standard solder lugs. Mounting nut included.


Product Specifications
  • GenderFemale / Jack
  • Mounting TypeChassis / Panel Mount
  • ConductorsMono (TS)
Neutrik NMJ2HC-S 1/4" Mono Phone Jack Unswitched
  • BrandNeutrik
  • ModelNMJ2HC-S
  • Part Number090-970
  • UPC844632059223
  • Product Category1/4" Phone Connectors
  • Unit of MeasureEA
  • Product Rating
    (6 Reviews)
  • Weight0.0264 lbs.
  • California Prop 65

    Warning: California residents only. Please note per Proposition 65 that this product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

View similar products to the Neutrik NMJ2HC-S 1/4" Mono Phone Jack Unswitched
in the 1/4" Phone Connectors product category.

Reviews

Neutrik NMJ2HC-S 1/4" Mono Phone Jack Unswitched
Neutrik NMJ2HC-S 1/4" Mono Phone Jack Unswitched is rated 3.1667 out of 5 by 6.
Rated 3 out of 5 by from Neutrik NMJ2HC-S 1/4" Mono Phone Jack UnswitchedI bought several of these to replace the typical 1/4" style jacks that were installed in my subs and tops. I was a little disappointed in the quality although the design still provides much better connection than typical jacks. As another user pointed out, the contacts can slip out easily - mainly if you over heat the contacts when soldering. It helps if you make a bend in lead end about 45 degrees to prevent them from slipping through. All said, for the money they are not bad, but there is room for improvement for use in speaker cabinets that require heavier wires.
Date published: 2013-02-20
Rated 1 out of 5 by from Poor connectionI replaced four 1/4" phone jacks in the field with these and none mated correctly with a variety of phone plugs. Maybe you need Neutrik plugs to work... Had to replace all four with another jack. Any movement of plug caused intermittent connection and was too easy to pull out.Not the quality I expect from Neutrik.
Date published: 2012-04-02
Rated 5 out of 5 by from Great JackDesign specially to isolate from chassis. Easy to use. A+
Date published: 2013-07-05
Rated 3 out of 5 by from Quality Okay, Fits Dayton Binding Plate Holes!This Jack fits in the factory Dayton Binding post plates near perfectly (7/16" appr.) I was using these in a test speaker and used 1/4" Female Disconnect terminals. The problem I had was when I tried to pull them off the metal terminals. The metal contact terminals slid in the plastic and bent themselves to the point they hardly made contact with a plug anymore. These are far from air tight if you need them to be in your speaker cabinet (I ended up using expanding foam to seal off Binding Post Plate inside the cabinet - 2 fuse holders, 2 toggle switches, and two 1/4" jacks)I'd only recommend soldering on these jacks.
Date published: 2011-02-17
Rated 2 out of 5 by from Looks just like the pictureHaven't used one yet but it looks great!
Date published: 2013-07-05
Rated 5 out of 5 by from Great QualitySeems to be of good quality and fairly straight forwad configuration. Very shallow connector not ideal for a flush mount setup. Comes with a bunch of shims so you can mount it up.
Date published: 2011-06-16

Product Q&A

Get your questions answered from other customers
who own this product or have experience with it.
If your question requires design or troubleshooting information,
please email tech@parts-expresss.com  for a prompt reply.
Neutrik NMJ2HC-S 1/4" Mono Phone Jack Unswitched

Customer Projects

Customer projects that include: Neutrik NMJ2HC-S 1/4" Mono Phone Jack Unswitched

If you built a project using this product, post it in the Parts Express Project Gallery.

Customer Discussions


If you would like to start a discussion about this product, post a thread in the TechTalk Customer Forum.
Parts Express Free Shipping at 98 Dollars

Get Deals
emailed to you every week.

Be the first to hear about new and exciting products,special pricing and incredible deals!

See This Week's "GET DEALS" Email
Parts Express
725 Pleasant Valley Dr.Springboro,OH45066USA
800-338-0531

© 1996-2014 Parts Express, All Rights Reserved

Host-Name:ZNODE1