free shipping at parts express

Neutrik NL4MP Speakon Connector 4 Pole Panel Mount

Brand:|Model: NL4MP|Part # 092-052
Patent protected, reliable, cost effective, and extremely durable, Neutrik's Speakon® series of professional speaker and amplifier connectors offers the "quick lock" locking system and recently redesigned inserts for the cable ends.
In Stock
Your Price
Buy 25-99 $2.15
Buy 100+$1.96
Part # 092-052
  • Industry standard "quick-lock" speaker connection
  • 4-pole female connector
  • Familiar "D" Series form factor
  • Black finish

Product Details

Neutrik NL4MP Speakon Connector 4 Pole Panel Mount

Neutrik's Speakon® series of professional speaker and amplifier connectors are recognized as the industry standard. Patent protected, reliable, cost effective, and extremely durable the Speakon® system offers the "quick lock" locking system. Speakon® panel receptacles with solder terminations also allow you to use quick disconnect type terminals (0.187" x 0.020") for ease and reliability of assembly.

The contacts in this series are touch proof and designed to prevent damage from arcing if disconnected under load. Ensuring fail-safe conditions for both the equipment and the operator. Speakon® meets the prevailing safety standards of IEC65, IEC348, CE, CSA and are UL rated (file #E135070). Connector type: Chassis connector/panel receptacle, 4-pole, "D" series style with air-tight seal. Mfg. #NL4MP.

Product Specifications
  • Circuit4-Pole
  • Mounting TypeChassis / Panel Mount
  • GenderMale
Neutrik NL4MP Speakon Connector 4 Pole Panel Mount
  • BrandNeutrik
  • ModelNL4MP
  • Part Number092-052
  • UPC703272020065
  • Product CategoryspeakON / HPC Speaker Connectors
  • Unit of MeasureEA
  • Product Rating
    (14 Reviews)
  • Weight0.05 lbs.
  • California Prop 65

    Warning: California residents only. Please note per Proposition 65 that this product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

View similar products to the Neutrik NL4MP Speakon Connector 4 Pole Panel Mount
in the speakON / HPC Speaker Connectors product category.


Neutrik NL4MP Speakon Connector 4 Pole Panel Mount
Neutrik NL4MP Speakon Connector 4 Pole Panel Mount is rated 4.6429 out of 5 by 14.
Rated 4 out of 5 by from Good unit - decent priceBasic unit - good quality - will buy again. see
Date published: 2009-08-21
Rated 5 out of 5 by from Speakon Panel MountExactly what I expect from Neutrik, product works great.
Date published: 2000-03-02
Rated 4 out of 5 by from Neutrik standard for panels and dishesThis is probably my tenth time ordering these because they seem to be the only option for rack mount punch panels and using in the Penn Dish 262-334 for speakers (all the speakers I build have this dish and these connectors).I just wish that Neutrik would make the connector holes on the back air tight, I have to run some silicone over them after soldering with a syringe to seal them up.
Date published: 2009-01-17
Rated 5 out of 5 by from neutrik brand amoung the bestcant go wrong changing to neutrik speakon connectors
Date published: 2008-10-07
Rated 5 out of 5 by from Neutrik pulls through with a great productI am a mobile DJ and retrofitted my subwoofers that only had 1/4" jacks. I am just now switching everything over to speakon and and extremely happy with the product. Not sure WHY and didn't do this sooner. I feel confident that my cables have positive connection(s) and will not slip out in the middle of wedding reception.My soldering skills aren't the best, but after drilling out a slightly bigger hole for the 10-12 guage cable I got to work. I ran 2 in parallel on each cab with new terminal cups along with some heat shrink tubing and viola - professional connections on my cabs. My only complaint/recomendation for the product would be to label the 1-/1+ 2-/2+ on the side instead of on top under the screwhead - in low light situations you could mismatch connections.I will purchase more of these in the future.
Date published: 2008-04-11
Rated 3 out of 5 by from Speakon connectorIf you're trying to decide which speakon connector to use, this is the one you want. Almost all power amps and cables are equipped to work with the ML4MP. I used them in subs and was surprised that I couldn't find clips to fit the connector that would accomodate 12 ga. wire. I had to buy the smaller clips and rig them up to work.
Date published: 2008-03-30
Rated 5 out of 5 by from The BestThese are superb quality, rugged and affordable, especially if you use quantity discounts. These use the Nuutrik "D" style mounting, so you can mix and match different Neutrik connectors using the same hole pattern. Easy to connect, even if you loose the documentation, because the channel and polarity markings are molded into the back of the connector.A couple of tips: If there is going to be any vibration, solder the wire connections if at all possible. If you use push on connectors, use pliers to crimp the female connector before pushing it on the Speakon lug so it doesn't vibrate off (the metal on the Speakon lug seems to be a little thinner than typical Faston lugs, so the connector needs a little "encouragement" to remain tight). Also, use flathead instead of panhead screws to mount the connector. Some panhead heads are tall enough to prevent the cable connector from inserting all the way so that the connector can't twist and lock.Good stuff.
Date published: 2008-01-18
Rated 5 out of 5 by from FUYAstudiosHands down the best connector for any speaker. 4 pole is also a highlight if you are running 4 conductor wire in which 1 pair is lows and the other pair is highs. Really cuts down on stage clutter. If a speaker doesn't have a speakon connector it really needs to be retrofitted with one. Always a positive connection and the positive locking is great. The injection molding plastic used is VERY sturdy and i have yet had one break with serious abuse. Soldering recommended for a more positive wire connection but can use spade connectors too.
Date published: 2007-09-09
  • 2016-04-30T06:34CST
  • bvseo_cps, prod_bvrr, vn_cps_3.2.0
  • cp_2, bvpage2n
  • co_hasreviews, tv_0, tr_14
  • loc_en_US, sid_092-052, PRD, sort_mostRecent
  • clientName_PartsExpressInternational

Product Q&A

Get your questions answered from other customers
who own this product or have experience with it.
If your question requires design or troubleshooting information,
please email  for a prompt reply.
Neutrik NL4MP Speakon Connector 4 Pole Panel Mount
Parts Express FacebookParts Express TwitterParts Express YouTubeParts Express PinterestParts Express SpotifyParts Express Instagram
Live Chat Software