Neutrik NL4MP Speakon Connector 4 Pole Panel Mount

Brand:| Model: NL4MP
Patent protected, reliable, cost effective, and extremely durable, Neutrik's SpeakonĀ® series of professional speaker and amplifier connectors offers the "quick lock" locking system and recently redesigned inserts for the cable ends.
  • Industry standard "quick-lock" speaker connection
  • 4-pole female connector
  • Familiar "D" Series form factor
  • Black finish
Part # 
Weight: 0.05 lbs.  
Your Price
Buy 25-99 $2.15
Buy 100-up$1.96
Part # 092-052
Qty:  EA
Available Payment Methods

Product Details

Neutrik NL4MP Speakon Connector 4 Pole Panel Mount

Neutrik's Speakon® series of professional speaker and amplifier connectors are recognized as the industry standard. Patent protected, reliable, cost effective, and extremely durable the Speakon® system offers the "quick lock" locking system. Speakon® panel receptacles with solder terminations also allow you to use quick disconnect type terminals (0.187" x 0.020") for ease and reliability of assembly.

The contacts in this series are touch proof and designed to prevent damage from arcing if disconnected under load. Ensuring fail-safe conditions for both the equipment and the operator. Speakon® meets the prevailing safety standards of IEC65, IEC348, CE, CSA and are UL rated (file #E135070). Connector type: Chassis connector/panel receptacle, 4-pole, "D" series style with air-tight seal. Mfg. #NL4MP.

Product Specifications
  • Circuit4-Pole
  • Mounting TypeChassis / Panel Mount
  • GenderMale
Neutrik NL4MP Speakon Connector 4 Pole Panel Mount
  • BrandNeutrik
  • ModelNL4MP
  • Part Number092-052
  • UPC7613187007231
  • Product CategoryspeakON / HPC Speaker Connectors
  • Unit of MeasureEA
  • Product Rating
    (12 Reviews)
  • Weight0.05 lbs.
  • California Prop 65

    Warning: California residents only. Please note per Proposition 65 that this product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

View similar products to the Neutrik NL4MP Speakon Connector 4 Pole Panel Mount
in the speakON / HPC Speaker Connectors product category.


Neutrik NL4MP Speakon Connector 4 Pole Panel Mount
Neutrik NL4MP Speakon Connector 4 Pole Panel Mount is rated 4.5833 out of 5 by 12.
Rated 5 out of 5 by from Great prices on quality parts!Parts Express always sells quality parts at great prices. I've bought cheap knockoffs, that fail after awhile, then you have to spend time replacing... Buy the stuff that will last, it only costs a few more pennies...
Date published: 2014-03-03
Rated 5 out of 5 by from Only Connecter I UseSince 2000, I have dabbled in to pro audio and along the way I purchased many different brands of cabs, amps, cables, etc, well I finally got tired of trying to find the right cable that was for the right speaker and had the right ends for the amp, bla blah blah. Waste of time right? Well insert PE and Neutrik.Since last November I have change every speaker cab to include at least 1 Neutrik NL4MP Speakon connector, as well as retro fitted a few amps with 2 Neutrik NL4MP Speakon connectors. I am by no means an electrician and didn't have any fancy equipment, just some time and a $10 soldering iron. These connectors are almost idiot proof, they are labeled 1+1-2+2- with enough room for even the chunky fingers to manipulate connectors.I recommend that you solder your connections in lieu of using some type of quick disconnect just to give a good solid connection, or solder the quick disconnect to your wire.These connectors along with their counter parts can save you hours of headaches and frustration, so pick up 1 or 2 or a dozen and start using them today.
Date published: 2012-01-03
Rated 5 out of 5 by from The only connector to use...In pro sound, and especially when flying speakers, the NL4MP shines. It locks with a quarter-turn action, can easily take on a kilowatt's worth of power and refuses to come apart - even when the full weight of a 50+ lb cabinet is bearing on the cable and connector (use proper screws and backplate for this level of durability).To connect it up, I use 0.187 AMP Fastons so that I may, in the rare event it becomes needed, pull 'em out & change pin-out wiring OR replace the connector with great ease.Other companies may have Neutrik products, but Parts Express has some of the most attractive pricing in the industry for less-than case quantities!
Date published: 2011-10-25
Rated 4 out of 5 by from Difficult with 12 guage cableThese use a (0.187" x 0.020") type disconect. a standard 3/8 disconects fits loosely and may slip off. Niether size will acomadate a 12 guage speaker cable. If your refitting a subwoofer or high wattage cabnet you may need the NL4MP-UC Sku 092-067 made for higher wattage applications, and use a 1/4 disconect.
Date published: 2010-01-25
Rated 4 out of 5 by from Good unit - decent priceBasic unit - good quality - will buy again. see davidkimmick.com
Date published: 2009-08-21
Rated 5 out of 5 by from Speakon Panel MountExactly what I expect from Neutrik, product works great.
Date published: 2009-08-03

Product Q&A

Get your questions answered from other customers
who own this product or have experience with it.
If your question requires design or troubleshooting information,
please email tech@parts-expresss.com  for a prompt reply.
Neutrik NL4MP Speakon Connector 4 Pole Panel Mount

Do I need this 4 pole version to run a bridged crown xls 1000 to a single sub? If I need all 4 poles, how would I internally wire them on the sub?

Asked by: jimmyboy1979
You only need a single 4 pole cable mount connector on the amplifier end since bridged mode on that amplifier requires poles 1+ and 2+ to be used for a bridged application. The subwoofer end can use a standard 2 pole connector on the cable and chassis connections.
Answered by: MattP
Date published: 2014-09-02

Do these come with nuts and bolts? If not where can I get them.

Asked by: Hobo joe
Unfortunately these do not include any mounting hardware. I would recommend #4-40 nuts and bolts which you should be able to get at your local hardware store.
Answered by: MattP
Date published: 2014-08-25

maybe a dumb question, but it has 1+1-2+2- pins, so since it is only being hooked to 2 wires, I assume you do a dual run of wires from your output to each pair of pins, but that you could use just the 1+1- or the 2+2- pair and get the same result?

Asked by: kingofbass
If you are only using two conductor wire, you simply use 1+ and 1- as long as it is wired the same as what you are plugging it into.
Answered by: MattP
Date published: 2014-04-12

Do these come with the 2 screws to mount it to a panel?

Asked by: RyanPitch
Hi, Ryan. This unit does not include mounting screws. You would use #4/40 flat head machine screws, available at any respectable hardware store.
Answered by: RussR
Date published: 2014-04-12

Customer Projects

Customer projects that include: Neutrik NL4MP Speakon Connector 4 Pole Panel Mount

If you built a project using this product, post it in the Parts Express Project Gallery.

Customer Discussions

If you would like to start a discussion about this product, post a thread in the TechTalk Customer Forum.
Get Deals
emailed to you every week.

Be the first to hear about new and exciting products,special pricing and incredible deals!

See This Week's "GET DEALS" Email
Parts Express
725 Pleasant Valley Dr.Springboro,OH45066USA

© 1996-2014 Parts Express, All Rights Reserved

Live Chat Software