092-059_ALT_0.jpg
092-059_ALT_0.jpg
 
092-059_ALT_0
 

Neutrik NL2MP Speakon Connector 2 Pole Panel Mount

Brand:| Model: NL2MP
Overview
Patent protected, reliable, cost effective, and extremely durable, Neutrik's SpeakonĀ® series of professional speaker and amplifier connectors offers the "quick lock" locking system and recently redesigned inserts for the cable ends.
Highlights
  • Industry standard "quick-lock" speaker connection
  • 2-pole female connector
  • Familiar "D" Series form factor
  • Black finish
Part # 
092-059
Weight: 0.05 lbs.  
IN STOCK
Your Price
$1.99
Buy 25-99 $1.89
Buy 100-up$1.74
Part # 092-059
Qty:  EA
Available Payment Methods

Product Details

Neutrik NL2MP Speakon Connector 2 Pole Panel Mount

Neutrik's Speakon® series of professional speaker and amplifier connectors are recognized as the industry standard. Patent protected, reliable, cost effective, and extremely durable the Speakon® system offers the "quick lock" locking system. Speakon® panel receptacles with solder terminations also allow you to use quick disconnect type terminals (0.187" x 0.020") for ease and reliability of assembly.

The contacts in this series are touch proof and designed to prevent damage from arcing if disconnected under load. Ensuring fail-safe conditions for both the equipment and the operator. Speakon® meets the prevailing safety standards of IEC65, IEC348, CE, CSA and are UL rated (file #E135070). Connector type: Chassis connector/panel receptacle, 2-pole, "D" series style with air-tight seal. Mfg. #NL2MP. Note: Does not intermate with the 4-pole (NL4) cable connectors.



Product Specifications
  • Circuit2-Pole
  • Mounting TypeChassis / Panel Mount
  • GenderMale
Neutrik NL2MP Speakon Connector 2 Pole Panel Mount
  • BrandNeutrik
  • ModelNL2MP
  • Part Number092-059
  • UPC703272072545
  • Product CategoryspeakON / HPC Speaker Connectors
  • Unit of MeasureEA
  • Product Rating
    (14 Reviews)
  • Weight0.05 lbs.
  • California Prop 65

    Warning: California residents only. Please note per Proposition 65 that this product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Similar Products

View similar products to the Neutrik NL2MP Speakon Connector 2 Pole Panel Mount
in the speakON / HPC Speaker Connectors product category.

Reviews

Neutrik NL2MP Speakon Connector 2 Pole Panel Mount
Neutrik NL2MP Speakon Connector 2 Pole Panel Mount is rated 4.1429 out of 5 by 14.
Rated 5 out of 5 by from Worked Prefectly with no defectsI ordered 24 of these to replace some old 1/4" plugs on some of my JBL enclosures. They arrived quickly and there were no product defects. Their slim rear design allowed me to install them behind the crossovers without any major modification to the enclosure. They're a perfect upgrade over 1/4" or Banana Plugs for any premanent installation.
Date published: 2014-04-24
Rated 3 out of 5 by from nice but not so niceThe first thing I have to say about this speakon connector is that is of very high quality very well made. On the downside if you are not using neutrik brand male connectors it is useless my other name brand connectors would not fit. My other connectors that I used are are also dual purpose I can use 1/4 inch or speakon style connectors. Very handy when your at A club with your sound system and problems come up versitility is always a plus.
Date published: 2012-12-20
Rated 5 out of 5 by from NL2 as you would expectI used two of these with the dual jack mountaing plate on a custom Single 18" subwoofer cabinet I built as a new production model we will be offeing. I noticed that Yamaha uses a very similar plate on their speakers :) As somone else mentioned since the pro world is going / gone speakon I decided this one will be the 1st model we will build using these new jacks and now only install speakon's on our big pro and semi pro speakers. Very easy to solder wire to and makes for a clean simple installtion.
Date published: 2011-09-28
Rated 5 out of 5 by from cooleasy to work with
Date published: 2009-12-13
Rated 5 out of 5 by from Works greatI installed this by drilling a hole through a wood bass guitar cabinet. I used a 1" drill bit but should have used a 15/16" drill bit. The 1" hole was a little oversized and left very little room for the mounting screws to grab. It worked so all is fine. Neutrik makes one with a round flange that would work better for this situation. Other than that it works great!
Date published: 2009-08-18
Rated 5 out of 5 by from Hot TicketWith all pro-sound going to SpeakOn and me with a lot of pre-SpeakOn gear I found plug replacement to be a must and this is the replacement part that will fit your bill.
Date published: 2009-05-30

Product Q&A

Get your questions answered from other customers
who own this product or have experience with it.
If your question requires design or troubleshooting information,
please email tech@parts-expresss.com  for a prompt reply.
Neutrik NL2MP Speakon Connector 2 Pole Panel Mount

I need the speakon combo (1/4) is this this the correct item

Asked by: whiteboy
Unfortunately this is just a common two pole connector, not a combo.
Answered by: MattP
Date published: 2014-02-03

Speakon Connectors- Mounting screws included??

Cat. pg. 87
Asked by: wildbill
Unfortunately no, these do not include mounting screws.
Answered by: MattP
Date published: 2012-09-12

Customer Projects

Customer projects that include: Neutrik NL2MP Speakon Connector 2 Pole Panel Mount

If you built a project using this product, post it in the Parts Express Project Gallery.

Customer Discussions


If you would like to start a discussion about this product, post a thread in the TechTalk Customer Forum.
Get Deals
emailed to you every week.

Be the first to hear about new and exciting products,special pricing and incredible deals!

See This Week's "GET DEALS" Email
Parts Express
725 Pleasant Valley Dr.Springboro,OH45066USA
800-338-0531

© 1996-2014 Parts Express, All Rights Reserved

Host-Name:ZNODE1