Get your questions answered from other customers
who own this product or have experience with it.
If your question requires design or troubleshooting information,
please email email@example.com
for a prompt reply.
Neutrik NJ3FP6C-BAG 1/4" Locking Chassis Jack Black
how do you wire it?
The Neutrik NJ3FP6C-BAG 1/4" Locking Chassis Jack is a solder terminal chassis mounted locking jack. It is (TSR) tip / ring / sleeve or stereo jack depending on your point of reference or use.The item has three solder type terminals on the back for soldering or could also be set-up to use spade terminals.Good Luck
Date published: 2012-01-06
Can I use this in a TS configuration?
Yes, this jack is compatible with both mono and stereo plugs.
Date published: 2011-07-16
Can I get these in Chrome... I want to put them in our custom guitars ?
No, unfortunately this item is not available from Neutrik in a chrome finish. There is a nickel option, but the center is still black. I've linked the nickel finish piece below for your convenience.
Date published: 2011-07-11
Is the "sleeve" connection electrically connected to the body of this jack or is it isolated?
You can have it isolated or bonded to ground. There is a red isolator on the lateral screw, if the red isolator is installed ,the ground is "lifted" if the red isolator is removed it is "bonded" to chasis. this option is not available on the jacks with plastic housings.
Date published: 2013-04-03