Get your questions answered from other customers
who own this product or have experience with it.
If your question requires design or troubleshooting information,
please email email@example.com
for a prompt reply.
Neutrik NJ3FP6C 1/4" Locking Chassis Jack Nickel
please can you tell me how to connect this to a mono jack plug?
For a mono connection you will only be using the TIP and GR solder tabs on the back, TIP going to positive and GR going to negative.
Date published: 2014-10-16
How would this be wired? in the common sense for wiring speakers, which post would be positive and which one negative? Thanks
You will only be using the TIP and GR terminals on this connector when used for speakers. The TIP is positive and GR is negative (ground).
Date published: 2014-09-05
i was needed a plug to go in the top when not in use to keep water and dust out
This jack is open to receive the 1/4" trs plug. It does not close off, however, because it is a chassis mount dust and moisture should mostly be confined to the jack interior and not enter your electronic gear.You could minimize this by wiring a Shintom plug as a thru and leaving it inserted when the circuit is not in use.
Date published: 2012-08-05