092-011_ALT_0.jpg
092-011_ALT_0.jpg
 
092-011_ALT_0
 

Neutrik NC3MX Male XLR Connector Nickel

Brand:| Model: NC3MX
Overview
The Neutrik NC3MX male 3-pin XLR is a well-proven inline cable connector for balanced professional microphone cables, audio patch cords, and mic snakes.
Highlights
  • The worldwide standard for XLR cable connectors
  • Easy assembly and Neutrik chuck-type strain relief
  • Male 3-pin XLR for mics and audio lines
Part # 
092-011
Weight: 0.08 lbs.  
IN STOCK
Your Price
$2.49
Buy 25-99 $2.35
Buy 100-999 $2.18
Buy 1000-up$1.99
Part # 092-011
Qty:  EA
Available Payment Methods

Product Details

Neutrik NC3MX Male XLR Connector Nickel

Neutrik's X Series has become the accepted worldwide standard for XLR cable connectors. The NC3MX's compact design offers the shortest XLR cable termination in the industry. Assembly is quick and easy, with no screws to worry about and includes the unique Neutrik chuck-type strain relief.

Specificiations: • Connector type: XLR male • Shell: Nickel • Contacts: Silver • Mfg. #NC3MX.



Product Specifications
  • GenderMale
  • Mounting TypeCable Mount
  • Conductors3-Pin
Neutrik NC3MX Male XLR Connector Nickel
  • BrandNeutrik
  • ModelNC3MX
  • Part Number092-011
  • UPC7613187003165
  • Product CategoryXLR Connectors
  • Unit of MeasureEA
  • Product Rating
    (24 Reviews)
  • Weight0.08 lbs.
  • California Prop 65

    Warning: California residents only. Please note per Proposition 65 that this product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

View similar products to the Neutrik NC3MX Male XLR Connector Nickel
in the XLR Connectors product category.

Reviews

Neutrik NC3MX Male XLR Connector Nickel
Neutrik NC3MX Male XLR Connector Nickel is rated 4.7917 out of 5 by 24.
Rated 5 out of 5 by from Great productI've used Neutrik XLR connectors and a few other ones, these are the best! very solid when you plug it into a mixer. Also, when soldering the cable on there is enough room to work and also the fact that there is NO screws to hold this all together (and then strip out or fall our), this makes for one tight plug.
Date published: 2010-03-07
Rated 5 out of 5 by from I'll never buy another brand.Neutrik connectors are second to none. The chuck-styled strain relief is superior to anything I've seen in the past. Inside, the solder cups easily accept two conductors when making Y-cables.
Date published: 2010-02-01
Rated 5 out of 5 by from Everything I expected!Very functional, easy to install, they work great!
Date published: 2009-10-31
Rated 5 out of 5 by from cant beat neutrikI only use neutrik connectors in my studio and build projects. Reliable and take solder really well.
Date published: 2009-10-18
Rated 5 out of 5 by from My preferred XLRThese are my favorite XLR for building custom cables. The NC3FX-1 has a larger boot opening, but this one has a rubber dust shield that seals the back of the boot. These are easily color coded with tape rather than the more expensive version with the color coded boot.
Date published: 2009-09-24
Rated 5 out of 5 by from Great quality and solders fast!This item was well thought out in it's design, and is super easy to solder. All 4 parts go together well, and the sound is excellent.
Date published: 2009-03-29
Rated 5 out of 5 by from Easy to work withThis product is easy to work with and put together very well. the components fit well and you can wire it in a few minutes
Date published: 2009-03-10
Rated 5 out of 5 by from Beats Switchcraft by a long shotThese are very high quality, and 100% easier to solder and connect then the switchcraft xlr's. The strain relief is very nice, and the construction is superior to the switchcraft.
Date published: 2008-12-16
Rated 5 out of 5 by from Easy to use, sounds great, Neutrik are the best!Used a couple of these to make a stereo microphone cable recently. I was using 24AWG Teflon-insulated shielded pair cable with silver-plated copper conductors. It's thin stuff; roughly 1/8" OD. The compression fitting in these connectors wouldn't "grab" the cable without two layers of heat-shrink tubing over it. That worked out OK because I was using the heat-shrink as strain relief (and color coding) anyway.The shape of Neutrik's solder terminals is brilliant; you can melt solder into the "cup" with the wire just a bit into it and then when it's full enough, just shove the (Teflon-insulated) wire down into the cup, insulation and all. Shorts no more! You can try that with rubber-based insulation but I wouldn't advise it.
Date published: 2008-09-21
Rated 4 out of 5 by from Great connectors!I purchased these connectors to make 3 sets of balanced interconnects. I was pleasantly surprised to see how nice these connectors were and they were very easy to work with. I would highly recommend them!
Date published: 2008-09-10
Rated 5 out of 5 by from Excellent XLR ConnectorIf you need to repair or home-build mic cables these are fantastic connectors. The ease of soldering & assembly is second to none. Also, the strain relief is great.
Date published: 2008-08-14
Rated 4 out of 5 by from Very Good but....These are very nice connectors but they can't take the abuse of the bulletproof Switchcraft A3F/A3M. If the connections are in a rack or a place you know the connector will not be abused these will do fine. If the connector is out in the middle of a traffic area or for some other reason may be subjected to abuse, reach for the Switchcraft.The Neutrik is simply not as robust a connector as the older switchcraft design. Nonetheless the Neutrik is acceptable for 90+% of applications where elephants and very large roadies do not tread.
Date published: 2008-07-30
Rated 5 out of 5 by from Great Buy!Just played a show with Greeley Estates using one female and 2 male to split the signal so one could go to my power amp and the other to the theaters system! Worked like a charm! Would highly recommend!
Date published: 2008-05-10
Rated 4 out of 5 by from ExcellentEasy to install and durable construction.
Date published: 2008-03-25
Rated 5 out of 5 by from Neutrik wins againThese have the best connectability that I have ever used. Never had a bad connection with them. Price is very reasonable. Piece of mind is priceless.
Date published: 2008-02-22
Rated 5 out of 5 by from Good ValueEasy to assemble and solder. Excellent clamping on even small cables.
Date published: 2007-10-24
Rated 5 out of 5 by from Excellent connectorSolder connections. Quick & easy assembly - no screws or clamps. I like the cable retainer design. Pro quality.
Date published: 2007-10-07
Rated 5 out of 5 by from This is really nice.I've used a lot of XLRs over the years, mainly Switchcraft, and these are truly a pleasure to install. No little set screws to deal with, yet the product is durable and looks great. Plus, the metal sleeve is short, so you don't need as much space behind the equipment.
Date published: 2007-08-21

Product Q&A

Get your questions answered from other customers
who own this product or have experience with it.
If your question requires design or troubleshooting information,
please email tech@parts-expresss.com  for a prompt reply.
Neutrik NC3MX Male XLR Connector Nickel

Customer Projects

Customer projects that include: Neutrik NC3MX Male XLR Connector Nickel

If you built a project using this product, post it in the Parts Express Project Gallery.

Customer Discussions


If you would like to start a discussion about this product, post a thread in the TechTalk Customer Forum.

Recently Viewed Products

Get Deals
emailed to you every week.

Be the first to hear about new and exciting products,special pricing and incredible deals!

See This Week's "GET DEALS" Email
Parts Express
725 Pleasant Valley Dr.Springboro,OH45066USA
800-338-0531

© 1996-2014 Parts Express, All Rights Reserved

Host-Name:ZNODE1