092-036_ALT_0.jpg
092-036_ALT_0.jpg
 
092-036_ALT_0
 

Neutrik NC3FD-L-1 "D" Series Panel Mount XLR Connector Female Nickel

Brand:| Model: NC3FD-L-1
Overview
In this series, the male and female fit in the same hole cut-out and are front or rear mountable. The "D-L-1" Series features a one-piece unit with solder cup terminations. It is RF protected via a 3-point coaxial ground contact shell of the mated connector. This series is very cost effective.
Highlights
  • The worldwide standard for XLR cable connectors
  • D Series front or rear panel mount
  • Female 3-pin XLR for mics and audio lines
Part # 
092-036
Weight: 0.0625 lbs.  
IN STOCK
Your Price
$2.69
Buy 25-99 $2.59
Buy 100-up$2.49
Part # 092-036
Qty:  EA
Available Payment Methods

Product Details

Neutrik NC3FD-L-1 "D" Series Panel Mount XLR Connector Female Nickel

In this series, the male and female fit in the same hole cut-out and are front or rear mountable. The "D-L-1" Series features a one-piece unit with solder cup terminations. It is RF protected via a 3-point coaxial ground contact shell of the mated connector. This series is very cost effective.

Connector type: XLR female • Shell: Nickel • Contacts: Silver • Mfg. #NC3FD-L-1. 



Product Specifications
  • GenderFemale
  • Mounting TypeChassis / Panel Mount
  • Conductors3-Pin
Neutrik NC3FD-L-1 "D" Series Panel Mount XLR Connector Female Nickel
  • BrandNeutrik
  • ModelNC3FD-L-1
  • Part Number092-036
  • UPC848864000756
  • Product CategoryXLR Connectors
  • Unit of MeasureEA
  • Product Rating
    (4 Reviews)
  • Weight0.0625 lbs.
  • California Prop 65

    Warning: California residents only. Please note per Proposition 65 that this product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

View similar products to the Neutrik NC3FD-L-1 "D" Series Panel Mount XLR Connector Female Nickel
in the XLR Connectors product category.

Reviews

Neutrik NC3FD-L-1 "D" Series Panel Mount XLR Connector Female Nickel
Neutrik NC3FD-L-1 "D" Series Panel Mount XLR Connector Female Nickel is rated 4.75 out of 5 by 4.
Rated 5 out of 5 by from Neutrik and Parts Express...A great combination.Neutrik has always been the leader for quality components, but this was my first time using Parts Express... I have to say that their service was impeccable and theirproduct line is outstanding. I'm hooked!
Date published: 2014-02-04
Rated 5 out of 5 by from Typical Neutrik quality speaks for itself.Used these with a pre-drilled 19" rack plate to extend mixer I/O from the hard to reach and see in a dark hall to the front panel of the rack for easy access and ID.Work perfectly and provide a real professional look.
Date published: 2014-01-31
Rated 5 out of 5 by from Excellent product.You can't go wrong with Neutrik. I used these to replace some off-brand connectors in a patchbay that was quite worn out. I'd like to note that these will accept #4 screws as well as the metric screws that Neutrik specifies.
Date published: 2010-02-01
Rated 4 out of 5 by from Exelentees un exelente producto se los recomiendo los use para reparar una medusa que compre y los conectores salieron malos con este nuevo repuesto quedo exelente
Date published: 2009-10-05

Product Q&A

Get your questions answered from other customers
who own this product or have experience with it.
If your question requires design or troubleshooting information,
please email tech@parts-expresss.com  for a prompt reply.
Neutrik NC3FD-L-1 "D" Series Panel Mount XLR Connector Female Nickel

How much is shipping? Looking at 15 Part # 090-349. Might change to silver pin, thinking about it. Also do you have the stage "floor mount" metal enclosure? I need 3 of the 4 connector boxes.

Asked by: penright
Unfortunately the only floor boxes we offer come with connectors pre installed, you can see them below. Please contact our sales department for shipping questions.http://www.parts-express.com/cat/floor-stage-boxes/1734
Answered by: MattP
Date published: 2014-07-11

What is the hole size required for these?

Asked by: NRG5
For any "D" series Neutrik device, the cutout in your panel should be 24mm (0.945").
Answered by: RussR
Date published: 2011-10-26

Customer Projects

Customer projects that include: Neutrik NC3FD-L-1 "D" Series Panel Mount XLR Connector Female Nickel

If you built a project using this product, post it in the Parts Express Project Gallery.

Customer Discussions


If you would like to start a discussion about this product, post a thread in the TechTalk Customer Forum.
Get Deals
emailed to you every week.

Be the first to hear about new and exciting products,special pricing and incredible deals!

See This Week's "GET DEALS" Email
Parts Express
725 Pleasant Valley Dr.Springboro,OH45066USA
800-338-0531

© 1996-2014 Parts Express, All Rights Reserved

Host-Name:ZNODE1
Live Chat Software