092-075_ALT_0.jpg
092-075_ALT_0.jpg
 
092-075_ALT_0
 

Neutrik NA3MDF XLR "D" Series 3-Pin Male to Female Adapter

Brand:| Model: NA3MDF
Overview
Made with the same rugged diecast shell as the NC3* series connectors, this panel mount XLR male-female feed-through adapter offers the professional look, compact design, and durability that you've come to expect from Neutrik.
Highlights
  • XLR male to female feed-through
  • Durable diecast construction
  • Familar "D" series form factor
  • Nickel finish
Part # 
092-075
Weight: 0.15 lbs.  
IN STOCK
List Price$10.23
You Save29%
Your Price
$7.25
Buy 25-99 $6.59
Buy 100-up$6.35
Part # 092-075
Qty:  EA
Available Payment Methods

Product Details

Neutrik NA3MDF XLR "D" Series 3-Pin Male to Female Adapter
Neutrik offers a variety of adapters that will reliably interface with various connector combinations. Made with the same rugged diecast shell as the NC3* series connectors, this panel mount XLR male-female feed-through adapter offers the professional look, compact design, and durability that you've come to expect from Neutrik. Standard "D" series cutout. 3-pin XLR male (front) to 3-pin XLR female (rear).


Product Specifications
  • GenderMale
  • Mounting TypeChassis / Panel Mount
  • Conductors3-Pin
Neutrik NA3MDF XLR "D" Series 3-Pin Male to Female Adapter
  • BrandNeutrik
  • ModelNA3MDF
  • Part Number092-075
  • UPC7613187002243
  • Product CategoryXLR Connectors
  • Unit of MeasureEA
  • Product Rating
    (5 Reviews)
  • Weight0.15 lbs.
  • California Prop 65

    Warning: California residents only. Please note per Proposition 65 that this product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Similar Products

View similar products to the Neutrik NA3MDF XLR "D" Series 3-Pin Male to Female Adapter
in the XLR Connectors product category.

Reviews

Neutrik NA3MDF XLR "D" Series 3-Pin Male to Female Adapter
Neutrik NA3MDF XLR "D" Series 3-Pin Male to Female Adapter is rated 5.0 out of 5 by 5.
Rated 5 out of 5 by from No more soldering!I am so glad I found these little beauties. Now you no longer have to solder rather a short xlr cable can be connected to the backside of this unit and then to your equipment. Clean and EXTREMELY useful. It is available in both male and female version.
Date published: 2014-09-23
Rated 5 out of 5 by from was exactly what I was looking forMounted my microphones inside my drumsI bought 4 adapters. Drilled a 13/16" hole into my drum shells (body of the adapter is actually 7/8"...but wanted them extra tight)I lightly tapped the adapters into the holes (male & flange on the outside) I drilled two holes thru the flange mount (1/8" drill bit) and used #8 course thread screws with nuts on the insideAfter various efforts to mount the microphone to the shell and ordering 12" XLR cords (too much stuffing in the drums and sounded bad)...I finally unplugged everything and simply plugged the microphones directly into the adapter female side.Overall cost to mount my microphones inside my drums was $39.00 (not counting the cost of my microphones)$29.00 for 4 mounts13/16" drill bit & 1/8" drill bit = $10.00
Date published: 2014-08-26
Rated 5 out of 5 by from Great productworked perfectly for the task I had. I didn't have to solder hundreds of connections. Instead I purchased these and a small patch cord, and I was done (including drilling out all the holes) in less than two hours!
Date published: 2013-06-04
Rated 5 out of 5 by from just what I neededI was very excited to find this adapter and at such a reasonable price. It was just what I needed for a project. The client was extra pleased with the project as a result of having this adapter.
Date published: 2013-03-16
Rated 5 out of 5 by from Great for in the field pachingI run a sound reinforcment rental company and I need to reconfigure my systems often. with these connectors I can set the system to my customer's needs and still have all connections made on the outside of my racks. If a cable fails, it can be replaced easily.
Date published: 2009-10-01

Product Q&A

Get your questions answered from other customers
who own this product or have experience with it.
If your question requires design or troubleshooting information,
please email tech@parts-expresss.com  for a prompt reply.
Neutrik NA3MDF XLR "D" Series 3-Pin Male to Female Adapter

Customer Projects

Customer projects that include: Neutrik NA3MDF XLR "D" Series 3-Pin Male to Female Adapter

If you built a project using this product, post it in the Parts Express Project Gallery.

Customer Discussions


If you would like to start a discussion about this product, post a thread in the TechTalk Customer Forum.
Get Deals
emailed to you every week.

Be the first to hear about new and exciting products,special pricing and incredible deals!

See This Week's "GET DEALS" Email
Parts Express
725 Pleasant Valley Dr.Springboro,OH45066USA
800-338-0531

© 1996-2014 Parts Express, All Rights Reserved

Host-Name:ZNODE1