Multiswitch 3-In 8-Out

Multiswitch 3-In 8-Out

Brand:| Model: TSMS-3/8
Overview
These multi-switches are designed to combine two LNB inputs with one off-air antenna (or CATV) signal, then distribute to up to four receivers. They allow each receiver to view vertical or horizontal channels as well as off-air or CATV channels.
Part # 
180-454
Weight: 1.8 lbs.  
IN STOCK
Your Price
$34.80
Buy 5-11 $32.60
Buy 12-up$29.88
Part # 180-454
Qty:  EA
Available Payment Methods

Product Details

Multiswitch 3-In 8-Out
These multi-switches are designed to combine two LNB inputs with one off-air antenna (or CATV) signal, then distribute to up to eight receivers. They allow each receiver to view vertical or horizontal channels as well as off-air or CATV channels. LNB polarities are switched by 14V/18V from satellite receivers, through coax cable. Built-in IF amplification circuit compensates for insertion loss. All ports are 500mA DC passive (except antenna port). Will also work for C and KU band satellites. Switches available in two or four receiver versions. Optional power supply must be used on cable runs over 100 feet or to power our in-line amplifiers.


Multiswitch 3-In 8-Out
  • BrandPico Macom
  • ModelTSMS-3/8
  • Part Number180-454
  • UPC664442350477
  • Product CategorySatellite Multiswitches
  • Unit of MeasureEA
  • Product Rating
    (1 Reviews)
  • Weight1.8 lbs.
  • California Prop 65

    Warning: California residents only. Please note per Proposition 65 that this product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Similar Products

View similar products to the Multiswitch 3-In 8-Out
in the Satellite Multiswitches product category.

Reviews

Multiswitch 3-In 8-Out
Multiswitch 3-In 8-Out is rated 4.0 out of 5 by 1.
Rated 4 out of 5 by from Good productThis is my second one in three years that I have bought. The first was hit by lighting and did not make it so that is why this is my second one in three years.
Date published: 2008-07-09

Product Q&A

Get your questions answered from other customers
who own this product or have experience with it.
If your question requires design or troubleshooting information,
please email tech@parts-expresss.com  for a prompt reply.
Multiswitch 3-In 8-Out

Can you use this with 3-channel RF Modulator instead of Satelite?

I want to combine outputs of various devices along with TimeWarner cable and distribute it to TVs in my house. Was wanting to use 3-channel RF Modulator(s) combined with this product to put all devices on one cable. Or is this just for Satelite use?
Asked by: Ken D
Before getting too far into this, we do not recommend modulating channels onto a line connected to a digital cable box. This could interfere with the return path. The only way for you to use this in your application is to use a splitter/combiner before the VHF/UHF input or a 3-channel modulator with a single output to feed into the VHF/UHF input.I would rather recommend the product listed below.
Answered by: mikevv
Date published: 2011-04-07

Customer Projects

Customer projects that include: Multiswitch 3-In 8-Out

If you built a project using this product, post it in the Parts Express Project Gallery.

Customer Discussions


If you would like to start a discussion about this product, post a thread in the TechTalk Customer Forum.

Recently Viewed Products

Multiswitch 3-In 8-Out
Part # 180-454
Get Deals
emailed to you every week.

Be the first to hear about new and exciting products,special pricing and incredible deals!

See This Week's "GET DEALS" Email
Parts Express
725 Pleasant Valley Dr.Springboro,OH45066USA
800-338-0531

© 1996-2014 Parts Express, All Rights Reserved

Host-Name:ZNODE1