Morel MDT 22 1-1/8" Neodymium Tweeter

Morel MDT 22 1-1/8" Neodymium Tweeter

Brand:| Model: MDT 22
Overview
By adding a rear chamber to the MDT-12, a lower resonance point and superior low-frequency performance are achieved. The tweeter has a very rich and full sound, and can easily accommodate crossover points as low as 2k, making it work great with most woofers.
Part # 
277-062
Weight: 0.3 lbs.  
IN STOCK
List Price$50.99
You Save23%
Your Price
$39.10
Buy 4-up$38.30
Part # 277-062
Qty:  EA
Available Payment Methods

Product Details

Morel MDT 22 1-1/8" Neodymium Tweeter

By adding a rear chamber to the MDT-12, a lower resonance point and superior low-frequency performance are achieved. The tweeter has a very rich and full sound, and can easily accommodate crossover points as low as 2k, making it work great with most woofers. A large diameter 1-1/8" coil on aluminum former immersed in ferrofluid gives this unit good power handling.



Product Specifications
  • Tweeter TypeSoft Dome
  • Cone / Dome Diameter1-1/8"
  • Impedance8 ohms
  • Power Handling (RMS)80 Watts
  • Frequency Response1,800 to 25,000 Hz
  • Sensitivity89 dB 1W/1m
Thiele-Small Parameters
  • Resonant Frequency (Fs)650 Hz
  • DC Resistance (Re)5.20 ohms
Mounting Information
  • Overall Outside Diameter2-1/8 x 2-1/8"
  • Cutout Diameter1-3/4"
  • Depth2-3/8"
Morel MDT 22 1-1/8" Neodymium Tweeter
  • BrandMorel
  • ModelMDT 22
  • Part Number277-062
  • UPC844632019555
  • Product CategoryTweeters
  • Unit of MeasureEA
  • Product Rating
    (11 Reviews)
  • Weight0.3 lbs.
  • California Prop 65

    Warning: California residents only. Please note per Proposition 65 that this product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Similar Products

View similar products to the Morel MDT 22 1-1/8" Neodymium Tweeter
in the Tweeters product category.

Reviews

Morel MDT 22 1-1/8" Neodymium Tweeter
Morel MDT 22 1-1/8" Neodymium Tweeter is rated 4.2727 out of 5 by 11.
Rated 4 out of 5 by from Polk FixIn my opinion, the tweeters in the Polk RTi A series are too bright, so I replaced the tweeters in my RTi A7's, CSi A6 & RTi A!'s with these & now have speakers that are much more enjoyable to listen to.
Date published: 2013-09-16
Rated 4 out of 5 by from Almost great...The Good News? They sound really good, especially for the price!The Bad news? The plastic mounting around the tweeter is really cheap feeling, and if you aren't careful(like I wasn't) you can actually crack it slightly. Also the terminal tabs are really really easy to bend, even when being careful(as I was)
Date published: 2010-01-19
Rated 5 out of 5 by from It's all about realismThese tweeters replace another brand costing over two times as much. They are smooth, transparent and easy to listen to at all sound levels.
Date published: 2009-11-25
Rated 2 out of 5 by from don't sand....I cut a 1.75 hole for these. They didn't fit so I sanded a tad off the area of the label. oops...the leads for the VC were right under the sticker with some potting. 1 dead tweeter.
Date published: 2008-12-31
Rated 5 out of 5 by from Plastic LiberationI've previously reviewed these tweets, but in their original condition (encased in plastic). Not being a big fan of the sonic qualities of plastic, I carefully liberated the driver from its plastic shell and built a baffle and enclosure from MDF, and dampened it with polyfill.Oh mama. I've got angels in my center channel.
Date published: 2008-12-20
Rated 4 out of 5 by from Excellent TweeterI blew a couple tweeters on some JBL N38 Northride Series speakers. Thought the price was reasonable so I tried them out. Hits the high notes real well. Very impressed! The speakers were driven for 5+ hrs around 80watts rms without a problem.
Date published: 2008-10-20

Product Q&A

Get your questions answered from other customers
who own this product or have experience with it.
If your question requires design or troubleshooting information,
please email tech@parts-expresss.com  for a prompt reply.
Morel MDT 22 1-1/8" Neodymium Tweeter

I'm thinking of building a two way system using this and morel MW266 with a crosover at 2000hz. Is it okay or should i use some other tweeter? I

Asked by: upen
This tweeter will handle a crossover that low without issue assuming its 12dB/octave. This is a well regarded tweeter but nobody can tell you what you will like.
Answered by: MattP
Date published: 2013-02-19

What size are the terminals, what connectors do you recommend? TIA

Asked by: dlarkindc
These connectors are .110" which are a standard size. We have these available but only in bags of 50. You can see them below.
Answered by: MattP
Date published: 2012-11-08

Customer Projects

Customer projects that include: Morel MDT 22 1-1/8" Neodymium Tweeter

If you built a project using this product, post it in the Parts Express Project Gallery.

Customer Discussions


If you would like to start a discussion about this product, post a thread in the TechTalk Customer Forum.

Recently Viewed Products

Get Deals
emailed to you every week.

Be the first to hear about new and exciting products,special pricing and incredible deals!

See This Week's "GET DEALS" Email
Parts Express
725 Pleasant Valley Dr.Springboro,OH45066USA
800-338-0531

© 1996-2014 Parts Express, All Rights Reserved

Host-Name:ZNODE1