Mills 1 Ohm 12W Non-Inductive Resistor

Manuals & Resources

Mills 1 Ohm 12W Non-Inductive Resistor

These non-inductive, wire wound resistors were designed for high-end audio applications and are perfect for use in crossover networks. Extreme measures were taken to ensure sonic purity.
In Stock
Your Price
$4.25
Buy 10+$3.95
Part # 005-1
Share:

Product Details

Mills 1 Ohm 12W Non-Inductive Resistor
These non-inductive, wire wound resistors were designed for high-end audio applications and are perfect for use in crossover networks. Extreme measures were taken to ensure sonic purity. They utilize an Alumina ceramic core, a nickel chromium element, silver plated copper end caps and tinned copper leads. The all welded construction greatly enhances frequency response. These 1% precision resistors, offer unsurpassed performance over conventional wire wound resistors. All are rated at 12W with 1% tolerance. Resistors body measures 1-1/8" in length by 5/16" diameter. Each lead measures 1-1/2" long and .040" thick.


Product Specifications
  • Resistance1.0 ohms
  • CompositionNon-Inductive Wirewound
  • Power Rating12 Watt
  • Tolerance1%
Mills 1 Ohm 12W Non-Inductive Resistor
  • BrandMills Resistor
  • Part Number005-1
  • UPC844632045950
  • Product CategoryAudio Grade / Non-inductive Resistors
  • Unit of MeasureEA
  • Product Rating
    (5 Reviews)
  • Weight0.0013 lbs.
  • California Prop 65

    Warning: California residents only. Please note per Proposition 65 that this product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Reviews

Mills 1 Ohm 12W Non-Inductive Resistor
Mills 1 Ohm 12W Non-Inductive Resistor is rated 5.0 out of 5 by 5.
Rated 5 out of 5 by from Mills ResistorsI use Seas drivers and SonicCraft capacitors along with Mills resistors.I prefer the 12 watt versions over the 5 watt though the circuit may require only 5 watt. They both sound fine. But the 5 watt has a softer presentation. The 12 watt allows more music to pass so you hear more soft detail and more accurate crescendos. My advice is instead of calculation inductors impedance, use large gauge inductors then tune the circuit with 12 watt resistors. A much more accurate sound will present itself.
Date published: 2015-06-28
Rated 5 out of 5 by from Well SpecifiedI have not yet installed them but took some measurements and they look good. Max error in the batch was 0.3%, comfortably beating the ±1% tolerance.
Date published: 2015-06-11
Rated 5 out of 5 by from Great resistor.Very easy to work with. Very nice gauge wire and pliable. Solid built.
Date published: 2013-03-20
Rated 5 out of 5 by from Excellent PadI used this resistor to replace a ceramic variety on my Magnepans to tame the tweeter level and there is a noticeable difference- smoother highs, less constrained.Incredible value for the money.
Date published: 2009-01-08
Rated 5 out of 5 by from Good crossover componentI've used Mills resistors many times when building crossovers and they are a high quality product. The sound is great and and they are very easy to solder without getting them too hot. Highly recommend for your next audio project.
Date published: 2008-08-15
  • 2015-07-30T07:38CST
  • bvseo_cps, prod_bvrr, vn_cps_3.1.5
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_5
  • loc_en_US, sid_005-1, PRD, sort_mostRecent
  • clientName_PartsExpressInternational

Product Q&A

Get your questions answered from other customers
who own this product or have experience with it.
If your question requires design or troubleshooting information,
please email tech@parts-expresss.com  for a prompt reply.
Mills 1 Ohm 12W Non-Inductive Resistor

could you use the resistor in an amplifier ? to bias the power mosfets.

Asked by: ATCGREG
Unless your design specifically indicates that a wire wound resistor is to be used, I'd suggest a metal oxide resistor, such as the ones I've linked below.
Answered by: RussR
Date published: 2012-08-17
  • 2015-07-30T08:32CST
  • bvseo_cps, prod_bvqa, vn_cps_3.1.5
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_1
  • loc_en_US, sid_005-1, PRD, sort_recentQuestionsFirst
  • clientName_PartsExpressInternational

Recently Viewed Products

Get Deals
emailed to you every week.

Be the first to hear about new and exciting products,special pricing and incredible deals!

See This Week's "GET DEALS" Email
Parts Express
725 Pleasant Valley Dr.Springboro,OH 45066USA
800-338-0531

© 1986-2015 Parts Express, All Rights Reserved

Host-Name:ZNODE1
Live Chat Software