Middle Atlantic RK20 Equipment Rack 20U

Middle Atlantic RK20 Equipment Rack 20U

Brand:| Model: RK20
Overview
Designed for permanent installations, these cost effective equipment racks feature 5/8" thick, furniture grade MDF board covered with an attractive black laminate for maximum durability.
Highlights
  • Enhanced high-quality black woodgrain laminate finish
  • Easily assembled with included hex key and hardware
  • 16" deep
  • Optional RKW caster kit available
Part # 
262-410
Weight: 38.3 lbs.  
IN STOCK
List Price$203.14
You Save24%
Your Price
$152.36
Part # 262-410
Qty:  EA
Available Payment Methods

Product Details

Middle Atlantic RK20 Equipment Rack 20U
Designed for permanent installations, these cost effective equipment racks feature 5/8" thick, furniture grade MDF board covered with an attractive black laminate for maximum durability. Shipped flat with 11 gauge threaded rack rails pre-installed, these units are very easy to assemble. Includes decorative screw caps, feet, allen key, driver bit, and hardware. Racking height: 35" (20 RU); 16" deep.


Product Specifications
  • Rack Spaces20U
Middle Atlantic RK20 Equipment Rack 20U
  • BrandMiddle Atlantic
  • ModelRK20
  • Part Number262-410
  • UPC656747014154
  • Product CategoryRack Cabinets
  • Unit of MeasureEA
  • Weight38.3 lbs.
  • California Prop 65

    Warning: California residents only. Please note per Proposition 65 that this product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Similar Products

View similar products to the Middle Atlantic RK20 Equipment Rack 20U
in the Rack Cabinets product category.

Reviews

Middle Atlantic RK20 Equipment Rack 20U

Product Q&A

Get your questions answered from other customers
who own this product or have experience with it.
If your question requires design or troubleshooting information,
please email tech@parts-expresss.com  for a prompt reply.
Middle Atlantic RK20 Equipment Rack 20U

Does this product have rails front and back?

Asked by: Geneva
according to the drawings on the spec sheet there are rails on the front only.The specifications state that the rails are pre-drilled to an industry standard though, so if you need to have rails on the back they should be readily available or easily cloned.
Answered by: doublejay
Date published: 2012-03-17

What is the rated weight load limit for equipment mounted in ihe 262-410 cabinet? All items will be rail mounted.

Planned items include 2 Crown SA-2 amps @ 55lb each.
Asked by: DaWizard
The rack itself is not rated for a weight load to my knowledge, however, since the casters are rated for 150 lbs, I think it would be safe to assume that the rack itself will hold at least that much. You should be just fine at 110 lbs.
Answered by: RussR
Date published: 2011-06-06

Is the 16" depth measured from the face of the case or the face of the mounting rails?

Are the mounting rails recessed or flush with the case front? If recessed, how much?Item: 262-418 - What is the weight rating of the caster set? How many of the casters have locks?
Asked by: DaWizard
The rack is 16" deep overall, from front face to rear face. The rails are not flush, but recessed 1/2" from the front of the rack. The load bearing capacity of the casters is 150 lbs, and two of them are locking.
Answered by: RussR
Date published: 2011-06-04

Customer Projects

Customer projects that include: Middle Atlantic RK20 Equipment Rack 20U

If you built a project using this product, post it in the Parts Express Project Gallery.

Customer Discussions


If you would like to start a discussion about this product, post a thread in the TechTalk Customer Forum.

Recently Viewed Products

Get Deals
emailed to you every week.

Be the first to hear about new and exciting products,special pricing and incredible deals!

See This Week's "GET DEALS" Email
Parts Express
725 Pleasant Valley Dr.Springboro,OH45066USA
800-338-0531

© 1996-2014 Parts Express, All Rights Reserved

Host-Name:ZNODE1