The Middle Atlantic MPR-JB863A is a junction box designed to connect to an MPR raceway in a custom outlet strip of your own design. MPR Series raceways are sized to accommodate three, six, eight, or nine MPR modules, so you can keep it simple, or as complex as the job requires. The raceways have an integral J-box which can be used if the raceway doesn't need to be fully populated. In cases where you need every bit of the raceway to contain modules (or where you wish to have non-MPR devices included), you can add an external J-box.
As a professional contractor or installer, you often get into situations where a standard "off-the-shelf" power strip just won't do the job. You end up using three, four, or more outlet devices (and paying dearly for them), or cobbling together some kind of Frankenstein-esque contrivance (and hoping the client never looks behind the rack). We've all been there. This all adds up to cost you not only money, but time, sanity, and precious space in the rack. Middle Atlantic's MPR Modular Power Raceway system comes to the rescue, giving you all the options you need to build a custom power strip on the fly, in the field, or in the shop.
It couldn't be simpler. You choose the components you need, as far as type, number, and amperage of outlets, and select a control device or sequencer (if needed), even fan control(s) and/or surge suppression. Once you have the components picked out, you simply use the raceway length needed to accommodate them, a few connectors, perhaps a blank cover or two, and voilà! Within minutes, you have the components installed in the chassis, ready to power up your installation! Simple, safe, and hassle-free, and who doesn't want that?
The next-generation MPR Modular Power Raceway system from Middle Atlantic literally puts the power in your hands, and puts you in complete control of your installation.